Search results

The paper aims to identify both the location and severity of damage in complex framed buildings using limited noisy vibration measurements. The study aims to directly adopt incomplete measured mode shapes in structural damage identification and effectively reduce the influence of measurement errors on predictions of structural damage.

Damage indicators are properly chosen to reflect both the location and severity of damage in framed buildings at element level for braces and at critical point level for beams and columns. Basic equations for an iterative solution procedure are provided to be solved for the chosen damage indicators. The Tikhonov regularisation method incorporating the L‐curve criterion for determining the regularisation parameter is employed to produce stable and robust solutions for damage indicators.

The proposed method can correctly assess the quantification of structural damage at specific locations in complex framed buildings using only limited information on modal data measurements with errors, without requiring mode shape expansion techniques or model reduction processes.

Further work may be needed to improve the accuracy of inverse predictions for very small structural damage from noisy measurements.

The paper includes implications for the development of reliable techniques for rapid and on‐line damage assessment and health monitoring of framed buildings.

The paper offers a practical approach and procedure for correctly detecting structural damage and assessing structural condition from limited noisy vibration measurements.

This paper aims to introduce a multiscale computational method for structural failure analysis with inheriting simulation of moving trans-scale boundary (MTB). This method is motivated from the error in domain bridging caused by cross-scale damage evolution, which is common in structural failure induced by damage accumulation.

Within the method, vulnerable regions with high stress level are described by continuum damage mechanics, while elastic structural theory is sufficient for the rest, dividing the structural model into two scale domains. The two domains are bridged to generate mixed dimensional finite element equation of the whole system. Inheriting simulation is developed to make the computation of MTB sustainable.

Numerical tests of a notched three-point bending beam and a steel frame show that this MTB method can improve efficiency and ensure accuracy while capturing the effect of material damage on deterioration of components and structure.

The proposed MTB method with inheriting simulation is an extension of multiscale simulation to structural failure analysis. Most importantly, it can deal with cross-scale damage evolution and improve computation efficiency significantly.

The purpose of this paper is twofold: first, to investigate the flood impact on a detached dwelling based on physical attributes related to the positioning, form and orientation of the house, and second, to investigate the effectiveness of property-level protection (PLP) to mitigate the direct structural damage of the house and the degree of floodwater ingress within the house.

The methods included modelling and simulation within the ANSYS Fluent® computational fluid dynamics software. Flooding scenarios with constrained parameters using theoretical modelling methods/tools were used to test the research hypotheses. Therefore, the results obtained will match the what-if scenarios considered if/based on the standard equations and assumptions made in the idealised model.

It was found that the position, orientation and form of an individual dwelling with brick and block construction informs the impact of the applied pressure on the structure and water ingress. Increase in pressure on the structure was noted from 0.3 m. All examined PLP mitigated the risk of structural damage if applied in consideration with other interventions e.g. mortar sealing. The use of non-return valves could potentially increase the pressure on the structure, but was also found to be effective in reducing water ingress. Findings should be considered in conjunction with the assumptions and exceptions of this study.

The limitations of this study are that the findings are based on an idealised model of a single detached house, with no landscape obstruction to the watercourse. This mathematical approach concerned with developing the normative models may therefore not fully describe the real-world complex phenomena. But it provides the first vision and an objective basis to answer the questions under study, and to propose usable outputs. Flooding caused from internal sources (e.g. bursting of pipes, roof leaks) or seepage from the ground and moisture through the walls were excluded. Building content was not modelled.

Common property-level flood interventions are typically tested to mitigate water ingress to the house. This study extends this approach to include the prevention of structural damage to the external walls; this can help to avoid the indiscriminate use of property-level flood prevention solutions without full understanding of their degree of effectiveness or impact on the building’s structural integrity. This study is practically significant because it provides outputs and means to examine which intervention(s) are better for delivering flood protection to a standard brick/block detached house type. This knowledge is highly beneficial for relevant stakeholders who can use it to deliver effective property-level flooding resilience measures.

The study provides useful insights for property owners and building professionals to explore suitable, cost-effective single property-level protection against flooding. Furthermore, the effective implementation of interventions can be used to achieve a customised, “fit for purpose” resilience retrofit.

The purpose of this study is to review the existing fatigue and vibration-based structural health monitoring techniques and highlight the advantages of combining both approaches.

Fatigue monitoring requires a fatigue model of the material, the stresses at specific points of the structure, a cycle counting technique and a fatigue damage criterion. Firstly, this paper reviews existing structural health monitoring (SHM) techniques, addresses their principal classifications and presents the main characteristics of each technique, with a particular emphasis on modal-based methodologies. Automated modal analysis, damage detection and localisation techniques are also reviewed. Fatigue monitoring is an SHM technique which evaluate the structural fatigue damage in real time. Stress estimation techniques and damage accumulation models based on the S-N field and the Miner rule are also reviewed in this paper.

A vast amount of research has been carried out in the field of SHM. The literature about fatigue calculation, fatigue testing, fatigue modelling and remaining fatigue life is also extensive. However, the number of publications related to monitor the fatigue process is scarce. A methodology to perform real-time structural fatigue monitoring, in both time and frequency domains, is presented.

Fatigue monitoring can be combined (applied simultaneously) with other vibration-based SHM techniques, which might significantly increase the reliability of the monitoring techniques.

The interest in the ability to detect damage at the earliest possible stage is pervasive throughout the civil engineering over the last two decades. In general, the experimental techniques for damage detection are expensive and require that the vicinity of the damage is known and readily accessible; therefore several methods intend to detect damage based on numerical model and by means of minimum experimental data about dynamic properties or response of damaged structures. The paper aims to discuss these issues.

In this paper, the damage detection problem is formulated as an optimization problem such as to obtain the minimum difference between the numerical and experimental variables, and then a modified ant colony optimization (ACO) algorithm is proposed for solving this optimization problem. In the proposed algorithm, the structural damage is detected by using dynamically measured flexibility matrix, since the flexibility matrix of the structure can be estimated from only the first few modes. The continuous version of ACO is employed as a probabilistic technique for solving this computational problem.

Compared to classical methods, one of the main strengths of this meta-heuristic method is the generally better robustness in achieving global optimum. The efficiency of the proposed algorithm is illustrated by numerical examples. The proposed method enables the deduction of the extent and location of structural damage, while using short computational time and resulting good accuracy.

Finding accurate results by means of minimum experimental data, while using short computational time is the final goal of all researches in the structural damage detection methods. In this paper, it gains by applying flexibility matrix in the definition of objective function, and also via using continuous ant colony algorithm as a powerful meta-heuristic techniques in the constrained nonlinear optimization problem.

Condition monitoring (CM) of structures is important from safety consideration. Damage detection techniques, using inverse dynamic approaches, are important tools to improve the mathematical models for monitoring the condition of structure. Uncertainties in the measured data might lead to unreliable identification of damage in structural system. Experimental validation is crucial for establishing its practical applicability. The measurement of dynamic responses at all degrees of freedom (DOFs) of a structure is also not feasible in practice. In addition the effect of these uncertainties and constraint of limited measurement are required to be studied based on experimental validation. This paper aims to discuss these issues.

Proposed numerical model based on measured natural frequencies and mode shapes is found suitable for CM of framed structures in the framework of finite element model with limited dynamic responses. The structural properties, namely, axial rigidity and bending rigidity are identified at the element level in the updated models of the system. Damage at the element level is identified by comparing the identified structural parameters of the updated model of the system with those of the undamaged state. Proposed numerical model is suitable for practical problem, as it is able to identify the structural parameters with limited modal data of first few modes, measured at selected DOFs.

The model is able to identify the structural damage with greater accuracy from the noisy dynamic responses even if the extent of damage is small. Experimental studies, on simple cantilever beams, establish the potential of the proposed methods for its practical implementation.

The greater random noise will lead to unreliable identification of structural parameters as observed. Thus, filtering of noise technique may be required to be adopted prior to consideration of the measured data in the proposed identification approach.

Requirement of higher modal data seems to be difficult in case of real life practical problem. Thus, simulation technique like condensation or SEREP technique may be adopted.

Structural health monitoring of infrastructural system is significantly important. CM of those structures from global response with limited measured data seems to be an effective tool to ensure safety and durability of structures.

The modal testing and subsequent extraction of modal data have been carried out at the authors’ laboratory. The numerical code based on inverse dynamic approach has been developed independently with original contribution.

Earthquakes are a serious threat to life; they claim many casualties and cause huge damage to people's properties. Seismic design provisions are added to building codes in response to the lessons learned from past earthquakes. However, despite all successes, many challenges are still faced and there are still deficiencies, especially in the field of architectural non‐structural components (ANSCs). In spite of their significance in the seismic performance of the building, ANSCs are mostly neglected from the viewpoint of seismic design. The purpose of this paper is to explain a proper state for the seismic consideration of ANSCs in the designing and construction process.

The key aim of this research is explaining a proper state for the seismic consideration of ANSCs in designing and construction process. For this purpose, first, their state is analyzed based on the conventional seismic design and construction process. Then, the insufficiencies of this approach are discussed through studying the consequences in the past earthquakes. Finally, based on the results obtained, the article tries to offer useful strategies to bring the potential threats of ANSCs to minimum.

It is found that ANSCs are considered only in a very small part of the design and construction process. In most cases, their executed details are allocated to a minor part of the design process or left to be chosen in the last stage of construction, as finishing details. As a result, despite all code provisions and practical guidelines, we still see many damages to and from ANSCs. The paper shows that the only way that the success of ANSCs' seismic restraints can be anticipated is by considering them in all stages of the design and construction process. To achieve this goal, collaboration is needed throughout all parts of the design and construction process, namely an interactive system design.

The paper, from the viewpoint of the design process, analyzes the seismic consideration of ANSCs, offering a new model for placing these components in a systematic design and construction process.

Damage to reinforced concrete (RC) structural elements is inevitable. Such damage can be the result of several factors, including aggressive environmental conditions, overloading, inadequate design, poor work execution, fire, storm, earthquakes etc. Therefore, repairing and strengthening is one way to improve damaged structures, so that they can be reutilized. In this research, the use of an ultra high-performance fibre-reinforced concrete (UHPFRC) layer is proposed as a strengthening material to rehabilitate damaged-RC beams. Different strengthening schemes pertaining to the structural performance of the retrofitted RC beams due to the flexural load were investigated.

A total of 13 normal RC beams were prepared. All the beams were subjected to a four-point flexural test. One beam was selected as the control beam and tested to failure, whereas the remaining beams were tested under a load of up to 50% of the ultimate load capacity of the control beam. The damaged beams were then strengthened using a UHPFRC layer with two different schemes; strip-shape and U-shape schemes, before all the beams were tested to failure.

Based on the test results, the control beam and all strengthened beams failed in the flexural mode. Compared to the control beam, the damaged-RC beams strengthened using the strip-shape scheme provided an increase in the ultimate load capacity ranging from 14.50% to 43.48% (or an increase of 1.1450 to 1.4348 times), whereas for the U-shape scheme beams ranged from 48.70% to 149.37% (or an increase of 1.4870–2.4937 times). The U-shape scheme was more effective in rehabilitating the damaged-RC beams. The UHPFRC mixtures are workable, as well easy to place and cast into the formworks. Furthermore, the damaged-RC beams strengthened using strip-shape scheme and U-shape scheme generated ductility factors of greater than 4 and 3, respectively. According to Eurocode8, these values are suitable for seismically active regions. Therefore, the strengthened damaged-RC beams under this study can quite feasibly be used in such regions.

Observations of crack patterns were not accompanied by measurements of crack widths due to the unavailability of a microcrack meter in the laboratory. The cost of the strengthening system application were not evaluated in this study, so the users should consider wisely related to the application of this method on the constructions.

Rehabilitation of the damaged-RC beams exhibited an adequate structural performance, where all strengthened RC beams fail in the flexural mode, as well as having increment in the failure load capacity and ductility. So, the used strengthening system in this study can be applied for the building construction in the seismic regions.

Aside from equipment, application of this strengthening system need also the labours.

The use of sand blasting on the surfaces of the damaged-RC beams, as well as the application of UHPFRC layers of different thicknesses and shapes to strengthen the damaged-RC beams, provides a novel innovation in the strengthening of damaged-RC beams, which can be applicable to either bridge or building constructions.

The purpose of this paper is to investigate different types of fire on structural steel members with damaged fireproofing. Two types of fire scenarios are considered, ASTM E119 fire and Hydrocarbon fire. In industrial facilities such as oil refineries, certain units maybe subjected to hydrocarbon fire, and its effect might be different than standard fire. The purpose of this study is to compare both types of fire scenarios on steel beams with damaged fireproofing and determine the fire rating of the damaged beams under each fire scenario.

The study is performed using computational methods, thermal-stress finite element analysis that is validated with experimental results. The results of practical beam sizes and typical applied loads in such structures have been plotted and compared with steel beams with non-damaged fireproofing.

The results show significant difference in the beam fire resistance between the two fire scenarios and show the fire resistance for beam under each case. The study provides percentage reduction in fire resistance under each case for the most commonly used cases in practice under different load conditions.

Extensive literature search has been performed by the authors, and few studies were found relevant to the topic. The question this study answers comes up regularly in practice. There are no standards to codes that address this issue.

Some lessons learned from post‐earthquake damage survey of structures affected by the Bam earthquake of December 26, 2003 in Iran are encapsulated in this paper. The Bam earthquake caused catastrophic structural damage in the region.

A method similar to that of rapid evaluation procedure (REP), recommended by the Applied Technology Council (ATC‐20) in the USA, was used for damage survey.

Bam represents a typical ancient city in many countries around the world. Most of the structures in the region are made of adobe, unreinforced masonry, steel, and unreinforced/reinforced concrete. Some of the main types of structural damage, their causes, and potential remedial measures are characterized with an emphasis on the very basic fundamental principles of earthquake‐resistant design.

The research reported has considerable implications for other seismic‐affected regions of the world.

A first hand‐account of the catastrophic damage caused by this natural disaster and the implications for future design and construction in seismic‐affected areas.