Search results

The purpose of this study was to examine how well a strength-based program grounded in positive psychology principles can advance the practical critical thinking skills of those pursuing the teacher training course.

This study used a single-group pre-test post-test design with 35 teacher-trainees from the Bachelor of Education course. The two-and-a-half-week strength-based program used the values in action survey to identify strengths. Pre- and post-test scores, measured with the Cornell Critical Thinking Test – Level Z, underwent Statistical Package for Social Sciences analysis including paired samples t-test for subcomponent and overall composite analysis.

Analysis of the pre- and post-test scores demonstrated a statistical significance in the critical thinking scores obtained by the teacher-trainees. Post-test scores were consistently significant. Out of the elements of critical thinking, induction, meaning, observation and credibility were more prominent. Deduction and assumption identification were also having a significant effect.

Most critical thinking programs focus on evaluating specific teaching methods for improving critical thinking skills. In education, positive psychology studies often center on students’ well-being, attention spans and academic success, aligning with wellness programs. Despite the importance of strengths in positive psychology, there is a lack of research on using a strength-based approach to boost critical thinking skills. This study aims to enhance teacher-trainees’ critical thinking by leveraging their individual strengths, moving away from traditional instructional strategies.

Attention deficit hyperactivity disorder (ADHD) is a neuro-developmental condition that has frequently been pathologised in career research and broader society to date. The study seeks to reframe such assumptions through a qualitative positive-focused exploration of career stories of ADHD adults, elicited through a strength-focused technique with wide applicability for coaching and other career-based development activities.

Situated in a strength-focused coaching psychology paradigm, the authors undertook semi-structured interviews with 17 participants, using an adapted feedforward interview technique (FFI) rooted in positive psychology (PP), to investigate individuals' strengths and successful career experiences.

Narrative thematic analysis of the transcripts identified two core themes: “the paradoxical nature of strengths” and “career success as an evolving narrative”. The participants described how they have achieved career success both “in spite of” and “because of” ADHD. The use of the FFI demonstrated a helpful and easily taught method for eliciting personal narratives of success and strengths, an essential foundation to any coaching process.

This research provides a nuanced overview, and an associated conceptual model, of how adults with ADHD perceive their career-based strengths and experiences of success. Further, the research shows the value of using a positive psychological coaching approach when working with neurominority individuals, using a successful adaptation of the FFI. The authors hope that the documentation of this technique and the resulting insights will offer important guidance for managers as coaches and internal and external career coaches, as well as providing positive and relatable narrative resources for ADHD adults.

This paper presents an experimental investigation in establishing the relationship between FDM process parameters and tensile strength of polycarbonate (PC) samples using the I-Optimal design.

I-optimal design methodology is used to plan the experiments by means of Minitab-17.1 software. Samples are manufactured using Stratsys FDM 400mc and tested as per ISO standards. Additionally, an artificial neural network model was developed and compared to the regression model in order to select an appropriate model for optimisation. Finally, the genetic algorithm (GA) solver is executed for improvement of tensile strength of FDM built PC components.

This study demonstrates that the selected process parameters (raster angle, raster to raster air gap, build orientation about Y axis and the number of contours) had significant effect on tensile strength with raster angle being the most influential factor. Increasing the build orientation about Y axis produced specimens with compact structures that resulted in improved fracture resistance.

The fitted regression model has a p-value less than 0.05 which suggests that the model terms significantly represent the tensile strength of PC samples. Further, from the normal probability plot it was found that the residuals follow a straight line, thus the developed model provides adequate predictions. Furthermore, from the validation runs, a close agreement between the predicted and actual values was seen along the reference line which further supports satisfactory model predictions.

This study successfully investigated the effects of the selected process parameters - raster angle, raster to raster air gap, build orientation about Y axis and the number of contours - on tensile strength of PC samples utilising the I-optimal design and ANOVA. In addition, for prediction of the part strength, regression and ANN models were developed. The selected ANN model was optimised using the GA-solver for determination of optimal parameter settings.

The proposed ANN-GA approach is more appropriate to establish the non-linear relationship between the selected process parameters and tensile strength. Further, the proposed ANN-GA methodology can assist in manufacture of various industrial products with Nylon, polyethylene terephthalate glycol (PETG) and PET as new 3DP materials.

Currently on additive manufacturing, extensive research is directed toward mitigating the main challenges associated with multi-material in fused filament fabrication which has a weak bonding strength between dissimilar materials. Low interfacial bonding strength leads to defects, anisotropy and temperature gradient in materials which negatively impact the mechanical performance of the multi-material prints. The purpose of this study was to assess the performance of different interface geometry designs in terms of the mechanical properties of the specimens.

Tensile test specimens were printed using: mono-material without a boundary interface, mono-material with the interface geometries (Face-to-face; U-shape; T-shape; Dovetail; Encapsulation; Mechanical interlocking; and Overlap) and multi-material with the interface geometries. The materials chosen with high and low compatibility were Tough polylactic acid (PLA) and TPU.

The main results of this study indicate that the interface geometries with the mechanical constriction between materials provide better structural integrity to the specimens. Moreover, in the case of the mono-material parts, the most effective interface design was the mechanical interlocking for both Tough PLA and TPU. On the other hand, in the case of multi-material specimens, the encapsulation showed the highest ultimate tensile strength, whereas the overlap and T-shape presented more robust bonding.

This study examines the mechanical performance, particularly tensile strength, strain at break, Young’s modulus and yield strength of different interface designs which were not studied in the previous studies.

This paper investigates the financial strength of banks in Bangladesh and factors affecting the financial strength over the years 2010–2015 on 35 banks.

Additive value function with CAMEL rating (capital stength, asset quality, managerial efficiency, earning ability, liquidity) has been employed to calculate banks’ financial strength index (FSI). In the second stage, panel regression has been exercised to find out the determinants of banks’ financial strength.

Empirical finding exhibits that the Islamic banks of Bangladesh are financially stronger and outperform conventional and Islamic window banks with higher liquidity. In the ownership category, private banks have more financial strength with higher capital strength, asset quality, managerial efficiency and earning ability than public banks. Bank size, loan recovery, salary and banking sector development positively affect whereas the loan-asset negatively affect the bank’s financial strength in Bangladesh.

This study has its limitations despite its importance. CAMELS is a more improved form than using CAMEL. But because of the data deficiency on “S” which represents sensitivity, it would not be possible to use CAMELS framework. Further researchers could incorporate this.

Government and banks should allow Islamic banks to enter the market on easy terms because of their outstanding performance in the existing market. In addition, banks should provide loans with consideration so that they cannot create credit risk. In addition, they should calculate composite financial strength annually to understand which components they need to work on.

This study extends the extant result on the composite FSI. It is hard to examine the financial strength of banks using only ratio value, which misleads most of the time. The study offers evidence on how the FSI provides more rigorous results and what are the factors contribute most to the financial strength of banks.

The purpose of this paper is to investigate the role of the retailer’s brand strength as a potential predictor of loyalty. It also examines the role of customer satisfaction (CS) to the retailer’s loyalty as well as its impact on the retailer’s brand strength.

The study was conducted in the grocery context and in a market under recession using the European Customer Satisfaction Index (ECSI) model. Data were collected through a telephone survey from 2,000 participants responsible for the household grocery shopping with a quota of 250 respondents from each of the leading grocery retailers in Greece. A formative measurement model was developed and the collected data were analyzed using partial least square path modeling.

The findings revealed that the strength of the retailer’s brand and CS influence retail loyalty and that brand strength mediate the strength of CS to loyalty. Results also suggested that the expectations and the perceptions toward the retailer’s product offering are the most important drivers of CS and loyalty. Thus, the study has proved the importance of the functional store attributes to CS and loyalty in the grocery store setting.

Research examining the suitability of the ECSI model in the grocery setting and in a market under economic crisis is scarce. This paper addresses these shortcomings by examining a customer loyalty model which incorporates the brand strength construct and investigates the role of brand strength as a potential predictor of loyalty as well as the role of CS in the brand strength and loyalty.

Using positive psychology theories, the authors build a model to test whether episodic fluctuations in strengths use coincide with changes in flow experiences and further predict risk-taking behavior and attentional performance.

A field study covering five working days was conducted among 164 Chinese employees; twice a day, they were asked to complete questionnaires regarding their strengths use and flow experiences during the previous hour (N = 938 observations). Immediately afterward, their risk-taking behaviors and attentional performance were tested using computerized tasks.

Multilevel analyses showed that when employees used their strengths more often in the previous hour, they also reported an increase in flow. Episodic fluctuations in flow were positively associated with risk taking and negatively related to attentional performance.

Employees should be encouraged to use their strengths more at work, as this might increase their flow experiences. At the same time, they should pay attention to the downsides of flow (i.e. less attention after flow) at an episodic level.

The authors add to previous studies by using a more objective approach, namely employing computerized tasks on risk-taking behavior and attention to capture the behavioral outcomes of work-related flow.

During the construction process of the China Railway Track System (CRTS) I type filling layer, the nonwoven fabric bags have been used as grouting templates for cement asphalt (CA) emulsified mortar. The porous structure of nonwoven fabrics endowed the templates with breathability and water permeability. The standard requires that the volume expansion rate of CA mortar must be controlled within 1%–3%, which can generate expansion pressure to ensure that the cavities under track slabs are filled fully. However, the expansion pressure caused some of the water to seep out from the periphery of the filling bag, and it would affect the actual mix proportion of CA mortar. The differences in physical and mechanical properties between the CA mortar under track slabs and the CA mortar formed in the laboratory were studied in this paper. The relevant results could provide important methods for the research of filling layer materials for CRTS I type and other types of ballastless tracks in China.

During the inspection of filling layer, the samples of CA mortar from different working conditions and raw materials were taken by uncovering the track slabs and drilling cores. The physical and mechanical properties of CA mortar under the filling layer of the slab were systematically analyzed by testing the electrical flux, compressive strength and density of mortar in different parts of the filling layer.

In this paper, the electric flux, the physical properties and mechanical properties of different parts of CA mortar under the track slab were investigated. The results showed that the density, electric flux and compressive strength of CA mortar were affected by the composition of raw materials for dry powders and different parts of the filling layer. In addition, the electrical flux of CA mortar gradually decreased within 90 days’ age. The electrical flux of samples with the thickness of 54 mm was lower than 500 C. Therefore, the impermeability and durability of CA mortar could be improved by increasing the thickness of filling layer. Besides, the results showed that the compressive strength of CA mortar increased, while the density and electric flux decreased gradually, with the prolongation of hardening time.

During 90 days' age, the electrical flux of the CA mortar gradually decreased with the increase of specimen thickness and the electrical flux of the specimens with the thickness of 54 mm was lower than 500 C. The impermeability and durability of the CA mortar could be improved by increasing the thickness of filling layer. The proposed method can provide reference for the further development and improvement of CRTS I and CRTS II type ballastless track in China.

Despite increasing attention to employee development, past research has mostly studied performance management systems (PMSs) in relation to task-related behaviors compared to proactive behaviors. Accordingly, this study addresses the relation between PMSs and innovative work behavior (IWB).

Building on signaling theory and human resource management (HRM) system strength research, the authors designed a factorial survey experiment (n = 444) to examine whether PMSs stimulate IWB under different configurations of distinctiveness, consistency and consensus, as well as in the presence of transformational leadership.

Results show that only strong PMSs foster IWB (high distinctiveness, high consistency and high consensus [HHH]). Additional analyses reveal that the individual meta-features of PMS consistency and consensus can also stimulate innovation. Transformational leadership reinforced the relationship between PMS consensus and IWB relationship, but not the relationships of the other meta-features.

The study’s findings suggest that organizations wishing to unlock employees' innovative potential should design PMSs that are visible, comprehensible and relevant. To further reap the innovative gains of employees, organizations could also invest in the coherent and fair application of planning, feedback and evaluation throughout the organization and ensure organizational stakeholders agree on the approach to PMSs.

The study’s findings show that PMS can also inspire proactivity in employees, in the form of IWB and suggest that particular leadership behaviors can complement certain PMS meta-features, and simultaneously also compete with PMS strength, suggesting the whole (i.e. PMS strength) is more than the sum of the parts (i.e. PMS meta-features).

This study applies and extends goal concepts by exploring the roles of goal intention and implementation planning in explaining how consumers minimize food waste (FW). It consists of impulsiveness in a food domain and food waste-related habit strength as obstacles in this motivational process.

Survey data from 399 Vietnamese consumers and structural equation modeling are used to test the proposed model.

The results establish a causal mechanism from goal intention to food waste reduction behavior via implementation planning. It also highlights mechanisms in which impulsiveness leads to a weak goal intention and careless implementation planning, consolidates FW-related habit strength and makes consumers fail to achieve food waste reduction (FWR) goals.

Future studies would benefit by investigating FWR behavior in different contexts based on the theory of trying or model of goal-directed behavior with the other traits, such as self-esteem or environmental values.

Businesses should design smaller eating portions to limit consumer impulsiveness in buying food. Food policymakers should educate consumers to form and maintain implementation planning, provide them with useful tools to deal with food habits or stimulate ethical motives to reduce FW.

This study extends goal concepts by exploring different routes, highlighting the competing roles of impulsiveness and habit strength compared with goal intention on FWR behavior.