Search results

The purpose of this paper is to compare the influence of relative density (RD) and strain rates on failure mechanism and specific energy absorption (SEA) of polyamide lattices ranging from bending to stretch-dominated structures using selective laser sintering (SLS).

Three bending and two stretch-dominated unit cells were selected based on the Maxwell stability criterion. Lattices were designed with three RD and fabricated by SLS technique using PA12 material. Quasi-static compression tests with three strain rates were carried out using Taguchi's L9 experiments. The lattice compressive behaviour was verified with the Gibson–Ashby analytical model.

It has been observed that RD and strain rates played a vital role in lattice compressive properties by controlling failure mechanisms, resulting in distinct post-yielding responses as fluctuating and stable hardening in the plateau region. Analysis of variance (ANOVA) displayed the significant impact of RD and emphasised dissimilar influences of strain rate that vary to cell topology. Bending-dominated lattices showed better compressive properties than stretch-dominated lattices. The interesting observation is that stretch-dominated lattices with over-stiff topology exhibited less compressive properties contrary to the Maxwell stability criterion, whereas strain rate has less influence on the SEA of face-centered and body-centered cubic unit cells with vertical and horizontal struts (FBCCXYZ).

This comparative study is expected to provide new prospects for designing end-user parts that undergo various impact conditions like automotive bumpers and evolving techniques like hybrid and functionally graded lattices.

To the best of the authors' knowledge, this is the first work that relates the strain rate with compressive properties and also highlights the lattice behaviour transformation from ductile to brittle while the increase of RD and strain rate analytically using the Gibson–Ashby analytical model.

This paper aims to present two Anand’s model parameter sets for the multilayer silver–tin (AgSn) transient liquid phase (TLP) foils.

The AgSn TLP test samples are manufactured using pre-defined optimized TLP bonding process parameters. Consequently, tensile and creep tests are conducted at various loading temperatures to generate stress–strain and creep data to accurately determine the elastic properties and two sets of Anand model creep coefficients. The resultant tensile- and creep-based constitutive models are subsequently used in extensive finite element simulations to precisely survey the mechanical response of the AgSn TLP bonds in power electronics due to different thermal loads.

The response of both models is thoroughly addressed in terms of stress–strain relationships, inelastic strain energy densities and equivalent plastic strains. The simulation results revealed that the testing conditions and parameters can significantly influence the values of the fitted Anand coefficients and consequently affect the resultant FEA-computed mechanical response of the TLP bonds. Therefore, this paper suggests that extreme care has to be taken when planning experiments for the estimation of creep parameters of the AgSn TLP joints.

In literature, there is no constitutive modeling data on the AgSn TLP bonds.

This study aims to enhance the understanding of fiber-reinforced polymer (FRP) applications in partially confined concrete, with a specific focus on improving economic value and load-bearing capacity. The research addresses the need for a more comprehensive analysis of non-uniform vertical strain responses and precise stress–strain models for FRP partially confined concrete.

DIC and strain gauges were employed to gather data during axial compression tests on FRP partially confined concrete specimens. Finite element analysis using ABAQUS was utilized to model partial confinement concrete with various constraint area ratios, ranging from 0 to 1. Experimental findings and simulation results were compared to refine and validate the stress–strain model.

The experimental results revealed that specimens exhibited strain responses characterized by either hardening or softening in both vertical and horizontal directions. The finite element analysis accurately reflected the relationship between surface constraint forces and axial strains in the x, y and z axes under different constraint area ratios. A proposed stress–strain model demonstrated high predictive accuracy for FRP partially confined concrete columns.

The stress–strain curves of partially confined concrete, based on Teng's foundation model for fully confined stress–strain behavior, exhibit a high level of predictive accuracy. These findings enhance the understanding of the mechanical behavior of partially confined concrete specimens, which is crucial for designing and assessing FRP confined concrete structures.

This research introduces innovative insights into the superior convenience and efficiency of partial wrapping strategies in the rehabilitation of beam-column joints, surpassing traditional full confinement methods. The study contributes methodological innovation by refining stress–strain models specifically for partially confined concrete, addressing the limitations of existing models. The combination of experimental and simulated assessments using DIC and FEM technologies provides robust empirical evidence, advancing the understanding and optimization of FRP-concrete structure performance. This work holds significance for the broader field of concrete structure reinforcement.

The purpose of this study is to experimentally investigate the large deformation compression characteristics of fused deposition modelling (FDM)-printed poly lactic acid (PLA), considering the combined effect of infill density and strain rate, and to develop a constitutive viscoplastic model that can incorporate the infill density to predict the experimental result.

The experimental approach focuses on strain rate-dependent (2.1 × 10⁻⁴, 2.1 × 10⁻³, and 2.1 × 10⁻² s⁻¹) compression testing for varied infill densities. Scanning electron microscopy (SEM) imaging of compressed materials is used to investigate deformation processes. A hyperelastic-viscoplastic constitutive model is constructed that can predict mechanical deformations at different strain rates and infill densities.

The yield stress of PLA increased with increase in strain rate and infill density. However, higher degree of strain-softening response was witnessed for the strain rate corresponding to 2.1 × 10⁻² s⁻¹. While filament splitting and twisting were identified as the damage mechanisms at higher strain rates, matrix crazing was observed as the primary deformation mechanism for higher infill density (95%). The developed constitutive model captured yield stress and post-yield softening behaviour of FDM build PLA samples with a high R² value of 0.99.

This paper addresses the need to analyse and predict the mechanical response of FDM print polymers (PLA) undergoing extensive strain-compressive loading through a hyperelastic-viscoplastic constitutive model. This study links combined effects of the printing parameter (infill density) with the experimental parameter (strain rate).

In practical engineering, oil filters often work under asymmetric cyclic loading. In order to improve the prediction accuracy of fatigue life of the oil filters under asymmetric cyclic loading, the effect of strain ratio and low cycle fatigue plastic deformation on fatigue life need to be considered. This paper aims to discuss the aforementioned objective.

First, strain-controlled fatigue tests with strain ratios of 0, 0.5 and −1 were carried out on the oil filter material 2A70-T6 aluminum alloy, and the test data were used to obtain strain fatigue life curves at three strain ratios. Then, based on the idea of the constant life curve method, the average value of the ratio of the strain amplitude corresponding to different strain ratios under the same partial life was defined as the strain ratio factor. Finally, the elastic-plastic factor was modified by the strain ratio factor, and a new fatigue life prediction model considering the effect of strain ratio was proposed.

The proposed model was validated, respectively, by fatigue test data of 2A70-T6 aluminum alloy, 2124-T851 aluminum alloy and oil filter and the results of the proposed model were compared with the Coffin–Manson equation, Morrow model and Smith–Watson–Topper (SWT) model, showing that the proposed model had higher applicability and accuracy.

In this work, a strain ratio factor is established based on the idea of the constant life curve method, and the strain ratio factor is used to modify the introduced elastic-plastic factor, and then a new fatigue life prediction model considering the influence of strain ratio and low cycle fatigue plastic deformation on material fatigue damage accumulation is proposed. The results show that the prediction results of the proposed model are in good agreement with the experimental data, and the proposed model has good fatigue life prediction ability considering the influence of strain ratio and lays a foundation for the fatigue life prediction of the oil filter.

This study aims to examine social determinants and social strains of cyberbullying victimization among expatriate populations in high-income countries such as Qatar. The authors argue that expatriate students will be exposed to stains and pressures due to several factors, such as feeling alienated, lonely, homesick, insecure and helpless. This study examines a partial assumption of general strain theory (GST), which posits that expats’ cyberbullying victimization can create negative stimuli that lead to negative feelings and, as a result, to delinquent behavior. The delinquent behavior can be seen as a coping method in encountering strains. Logistic regression analysis is applied (using SPSS v. 21) to test the hypothesis that the victimization of expats’ cyberbullying could lead to strain and delinquency.

A sample of 2,428 expatriate students (46% males and 54% females) was randomly selected from seven public schools in Qatar. The average number of siblings in the household was 2.7. Around 10.8% of the sample reported victimization by cyberbullying. Most came from intact families (80.6%) compared to 19.4 living in broken homes. Concerning the birth order of the student in the family, 25% of the sample were firstborn, and 20% were middle-born. Students’ mother relationships were higher than students’ father relationships (69% vs 51%, respectively). Fathers were higher in undergraduate education than mothers (60% vs 49%, respectively). Considering that 58% of women did not have a job, most fathers work in administrative positions (47% in administrative work and 39% in professional positions) as opposed to mothers’ positions (15% and 21%, respectively). The survey was distributed among expatriate students by trained researchers, teachers and social workers in public schools. The researchers explained the purpose of the study, confidentiality and potential risks and provided directions for completing the survey. Parents and their children provided signed informed consent before participation, following the institutional review boards of Qatar University’s Human Subject Research Committee and the Ministry of Social Development. The victimization of cyberbullying is measured at the dichotomy level by asking a general cyberbullying question (In the last 12 months, had you been bullied by other students using mobile messages, email, voice or video messages? Responses were 1 – yes and 0 – no). A definition of cyberbullying was included in the questionnaire. Independent measures are as follows: (1) demographic variables: gender, belief, health, number of friends and exposure to violence; (2) family variables: delinquent family, coercive parenting, family relations, family disputes, father absence and family ties; (3) school variables: school satisfaction, school violence, student fighting, teachers' violence, school truancy and going late to school; (4) imprudent behavior: smoking, alcohol, not using a seat belt, gambling, stealing less than 100 QR, chewing tobacco, stimuli, volatile drugs, sexual harassment, throwing garbage out of the car, cheating, vandalism and victimization.

Findings showed that n = 255, 10.8% of the expats’ sample N = 2,428 reported victimization of cyberbullying, of whom 46% were males and 54% were females. A total of 24% of the victims of cyberbullying were males, and 5.8% were females. About a third of the sample were cyberbullying perpetrators (n = 716, 29.5%). Victims of cyberbullying came from intact families (62.4%) compared to broken families (37.6%). A round third of the victims reported the absence of a father during their childhood (n = 78, 31.7%). Most of the victims came from a typical community compared to the delinquent community (71.2% vs 28.2%). About a third of the victims reported it was easy to talk with the father when needed (32% compared to 42.7%), who said it was easy. More than half of the victims do not use seat belts. A low percentage of them were gambling (n = 68, 27% or 2.9% of the total sample). Regarding escaping imprudent and delinquent behaviors, findings showed that a third and more than a tenth of the cyberbullying were smokers and alcoholics (n = 69, 27.4% and n = 42, 16.7% respectively). Moreover, among the most serious, widely spread student problems, around a quarter of the victims reported using chewing tobacco (Sweeka is the local name) (n = 54, 21.4%). Finally, drug use among victims was more than a tenth of them (n = 41, 16.3%). About a quarter of the victims reported stealing less than 100 QR (n = 67, 26.8% or 2.9% of the total sample). Concerning the crimes committed by victims, findings showed that more than forth of them committed assault (n = 71, 28.3%), student fights (n = 202, 80.8%), school violence (n = 117, 46.6%) and half of the victims (50.2%) were also victims of face-to-face bullying. Little below half of the sample was exposed to violence (n = 120, 48.6%) and was the victim of violence in the past 12 months (n = 100, 40.8%). A significant gender differences was found in the victimization of cyberbullying (1 = yes, 0 = no) (a = 000). Moreover, significant mean differences were found between expatriates student victimization of cyberbullying at (a = 000) in all strain variables. Using binary regression analysis to examine the equality of probability of being a victim of cyberbullying as accounted for by the independent variables, the model’s predictability was 89.4%. The Hosmer and Lemeshow test and omnibus tests support the model’s fit (a = 000). Nagelkerke R² shows that the stain variables accounted for 24% of the variance in the expat's student victimization of cyberbullying.

Conceptualization and determination of what constitutes cyberbullying from the criminal law perspective are needed. Cyberbullying is defined as a form of violence and crime involving new technologies (Sun et al., 2016, p. 62). Policymakers should provide accessible and equitable access to the criminal justice system, the integration of expatriates and the provision of support services to avoid delinquency.

A social cohesion, inclusion and well-being policy is needed for expatriate students and their families in Qatar. In particular, cultural diversity policy and programs, a source of strength and enrichment should be promoted in educational settings. Social inclusion and cultural diversity programs could ease the alienation and marginalization that expatriate students may encounter in their host societies to prevent stains and negative emotions that lead to delinquency and criminal behaviors. Access to support services without discrimination to avoid health and psychological strains and risk factors. This includes but is not limited to avoidance of stigmatization, embarrassment, sense of helplessness, humiliation and other negative feelings toward expatriates. Awareness and promotion of cultural diversity values are needed to enhance cultural acceptance to reduce victimization among the expatriate population. Criminal law and security implications conceptualization and determination of what constitutes cyberbullying from the criminal law perspective are needed. Cyberbullying is a form of violence and crime involving new technologies (Sun et al., 2016). Policymakers should provide accessible and equitable access to the criminal justice system, integrating expatriates and providing support services to avoid delinquency. There is a pressing need for further research within the realm of crime and law to establish the precise legal boundaries surrounding cyberbullying and to delineate the potential scope for legislative measures aimed at safeguarding against victimization in Qatar. Although the state of Qatar has taken steps to address cyberbullying by incorporating it into relevant legal frameworks, there remains a gap in terms of specifically targeting cyberbullying involving children and adolescents. Despite the introduction of the new Cybercrime Prevention Law, the issue of cyberbullying among these vulnerable groups is not adequately addressed.

Social implication includes but is not limited to avoidance of stigmatization, embarrassment, sense of helplessness, humiliation and other negative feelings towards expatriate. Awareness and promotion of cultural diversity values is needed to enhance cultural acceptance to reduce victimization among expatriate population.

The present study examines some strain theory assumptions and the victimization of the cyberbullying expatriate population. This study tests a partial assumption of GST, which states that the expatriate population’s exposure to the victimization of cyberbullying can lead to negative stimuli that, in return, create negative feelings and, as a result, imprudent and delinquent behavior. The cyberbullying behavior can be seen as an escaping and coping method in encountering strains. This study underscores the presence of cyberbullying within high schools among expatriate students, exerting significant effects on their personal, social and emotional behaviors. The novel insights gleaned from this investigation contribute substantively to the comprehension of both the pervasiveness and repercussions of cyberbullying on the well-being of expatriate students. This contribution is particularly vital, given the dearth of research in the field, largely attributable to the growing dependence of students on the internet for various cyber activities. This study examines a partial assumption of GST (in non-Western country). Moreover, it uses an advanced statistical analysis and large sample.

This work examines the effects of strain rate on the effective yield strength of high-strength steel at elevated temperatures, through tensile coupon tests at various strain rates, to propose appropriate reduction factors considering the strain rate effect.

The stress–strain relationships of 385 N/mm2, 440 N/mm2 and 630 N/mm2-class steel plates at elevated temperatures are examined at three strain rate values (0.3%/min, 3.0%/min and 7.5%/min), and the reduction factors for the effective yield strength at elevated temperatures are evaluated from the results. A differential evolution-based optimization is used to produce the reduction-factor curves.

The strain rate effect enhances with an increase in the standard design value of the yield point. The effective yield strength and standard design value of the yield point exhibit high linearity between 600 and 700 °C. In addition to effectively evaluating the test results, the proposed reduction-factor curves can also help determine the ultimate strength of a steel member at collapse.

The novelty of this study is the quantitative evaluation of the relationship between the standard design value of yield point at ambient temperature and the strain-rate effect at elevated temperatures. It has been observed that the effect of the strain rate at elevated temperatures increases with the increase in the standard design value of the yield point for various steel strength grades.

In this study, the effects of strain rate on the bending strength of full-scale wide-flange steel beams have been examined at elevated temperatures. Both full-scale loaded heating tests under steady-state conditions and in-plane numerical analysis using a beam element have been employed.

The load–deformation relationships in 385 N/mm²-class steel beam specimens was examined using steady-state tests at two loading rate values (0.05 and 1.00 kN/s) and at two constant member temperatures (600 and 700 °C). Furthermore, the stress–strain relationships considering the strain rate effects were proposed based on tensile coupon test results under various strain rate values. The in-plane elastoplastic numerical analysis was conducted considering the strain rate effect.

The experimental test results of the full-scale steel beam specimens confirmed that the bending strength increased with increase in strain rate. In addition, the analytical results agreed relatively well with the test results, and both strain and strain rate behaviours of a heated steel member, which were difficult to evaluate from the test results, could be quantified numerically.

The novelty of this study is the quantification of the strain rate effect on the bending strength of steel beams at elevated temperatures. The results clarify that the load–deformation relationship of steel beams could be evaluated by using in-plane analysis using the tensile coupon test results. The numerical simulation method can increase the accuracy of evaluation of the actual behaviour of steel members in case of fire.

This study aims to investigate how to manage the stressors that facility managers (FMs) face with the aim of reducing their stress and strain levels.

Using the job demands-resources (JD-R) model, stressors are operationalized from job demands, job resources and personal resources constructs. A structured questionnaire was used to collect data from FMs based in Singapore.

FMs have significantly high levels of stress, but they are able to manage this well. Job demands that cause stress and strain are those relating to insufficient time to complete the work and difficulties in handling the work. The lack of job resources in terms of lack of organizational support and inadequate stress mitigation programs are associated with high levels of stress and strain.

The limitations are the relatively small sample size and absence of a database of FMs in Singapore, and correlation is not causation when determining the association between stressors and stress and strain.

Based on the recommendations, employers and FMs may manage the specific stressors identified so that FMs’ stress and strain levels are under control to enable them to work optimally.

This research discovered that the JD-R model is moderated by certain features of facilities management and FMs. When these features are present, FMs are predisposed to more stressors, and higher stress and strain. For the facilities management profession, the discovery is that there are significantly more job demands: for in-house FMs compared to those working for outsourced firms; for FMs who need to carry out estate and asset management, landlord activities and facility planning compared to FMs who focus on operations and maintenance; and for FMs who work longer than five days compared to those who work a five-day week.

While the phenomenon of technostress has received significant attention from researchers in recent years, empirical findings concerning the consequences of specific forms of techno-stressors have remained scattered and contradictory. The authors aim to integrate the conclusions of previous studies to understand the effects of specific techno-stressors on strain and job performance.

This study employs meta-analytic techniques to calibrate the findings of 67 studies investigating more than 63,100 employees.

In general, not all techno-stressors have adverse effects. In particular, techno-uncertainty does not impact job performance. In addition, relative weight analyses reveal the relative importance of techno-complexity and techno-insecurity as predictors of both strain and job performance. Finally, this study finds that the effects of specific techno-stressors on job performance vary depending on research participants' gender, educational attainment and employment status.

First, this study provides a more nuanced view of the effects of specific techno-stressors. Second, this research clarifies the relative importance of specific techno-stressors as predictors of strain and job performance. Finally, this study reveals the moderating effects of demographic variables on the relationships between specific techno-stressors and job performance.