Search results

The purpose of this study is to develop a monolayer surface coating of stearic acid on Sn-Ag-Cu solder powder to limit oxidation.

Stearic acid was adsorbed onto Sn-Ag-Cu solder powder through liquid-phase adsorption. The isotherm of adsorption was measured and then the microstructure of coated powder was characterized by scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy and Fourier-transform infrared spectroscopy.

The adsorption isotherm of stearic acid on the powder was “H” type, which revealed the layer-by-layer adsorption on non-porous surface. When the concentration of solution was in the range of 0.001-0.006 mol/L, with an adsorption amount of 0.12 ± 0.1 mg/g, monolayer stearic acid covered the solder powder completely. Uniform and integrated self-assembled monolayer coating was formed through hydrogen bonds between the oxygen ions in surface lattice of Sn3.0Ag0.5Cu solder powder and the —O—H hydroxyl group of stearic acid. The maximum angle of stability of coated powder also reduced by 2.87° compared with that of non-coated powder. The increase rate of oxygen content of coated powder was much slower than that of non-coated powder when they were exposed to humid air.

As a result, oxidation of fine solder powder was effectively limited. Essentially, this method can also be applied to the coating of other types of solder powder and has reference significance to other coating by liquid-phase method.

A number of derivatives of vegetable and animal oils and fats are useable in the processing of rubbers, including fatty acids, fatty acid amides, amines, metallic soaps, and sulphur containing materials, etc.

The purpose of this paper is the production of fire retardant and smoke suppressant rigid polyurethane foam (RPUF) with lower toxicity by using several fire-retardant combinations.

Fire-retardant additives with cooling effect, barrier ash formation effect, gas-phase inhibition effect and smoke suppressant effect combined to produce an optimum outcome on RPUF. The additive amount and burning time correlation were studied to find out the minimum amount of fire-retardant to obtain fire-retardant polyurethane foam.

Zinc borate powder was coated with 1.5 wt % of stearic acid and hydroxy stearic acid. Polyammonium diborates (PABs) were synthesized and used as a fire-retardant and smoke suppressant for rigid PU foam. Fire-retardant rigid polyurethane foams (FR-RPUF) composites formed by using several combinations of zinc borate, aluminum trihydroxide, trischloroisopropyl phosphate (TCPP), PABs, zinc borate coated with stearic acid and hydroxy stearic acid. Produced FR-RPUF were horizontal burning grade, and burning time was in the range of 1–10 s.

There were limitations during the mixing of fire-retardant powders with polyol due to the high viscosity of the mixture.

FR-RPUF foam with lower toxicity can be produced industrially with these fire-retardant combinations.

FR-RPUF could be produced by using non-toxic additives. During a fire, these additives do not evolve toxic gases. The TCPP content of RPUF foam was reduced, and fire-retardant PU with lower toxicity was produced.

Coated zinc borate and the combinations of the fire-retardants were successful in producing non-toxic fire-retardant and smoke suppressant PU foam.

A number of oleochemicals have found application in the formulation of metal processing lubricants. Calcium palmitate can act as a gelling inhibitor for lubricants for non‐chip metal forming, and diglyceryl oleate and sodium oleyl sulphate have been employed in chipless forming and machining lubricants. Glyceryl monooleate has been used together with paraffin wax and xylene for forming aluminium sheets, and isopropyl oleate has been blended into lubricants for cold forming of metal. Lubrication in cold forming of steel and aluminium alloys has been promoted by the use of sodium stearate and phosphating processes. Stearic acid has also been utlized in metal forming. Butyl butanamine stearamide is applicable in lubricants for non‐ferrous metal working, and coatings that can prevent galling when titanium is cold worked can be formed on the metal by the use of 0.5 grams of hydrofluoric acid, with 10 grams stearic acid in 100 ml. of a solvent, the process being accelerated by the inclusion of phosphoric acid at 0.85 grams. Calcium stearate has also been used in solvent‐based metalworking Iubricants, in acrylic electrophoretic lubricant coatings on metal, and in bentonite‐containing metalworking oils. Mixtures of cetyl alcohol and tricresyl phosphate have been cast into slabs and used on metalworking tools.

The purposes of this study were to identify exogenous factors that would depress synthesis of saturated fats and enhance synthesis of unsaturated fats in the dairy cow’s mammary gland. Certain long‐chain exogenous fatty acids are known to modulate endogenous fat synthesis within tissues. We analyzed the effects of two different long‐chain monounsaturated fatty acids, namely oleic acid and trans‐vaccenic acid (TVA), on activities of acetyl‐CoA carboxylase (ACC), fatty acid synthetase (FAS) and stearoyl‐CoA desaturase (SCD) in bovine mammary epithelial cell cultures. The study was done using an established bovine mammary epithelial cell line, the MacT cells. ACC (EC 6.4.1.2) and FAS (EC 2.3.1.85) are two major enzymes involved in biosynthesis of saturated fatty acids in eucaryotic cells. SCD (EC 1.14.99.5) is the enzyme catalyzing the critical committed step in biosynthesis of unsaturated fatty acids from their saturated precursors. Data indicated depression of activity of enzymes responsible for mammary synthesis of saturated fatty acids (ACC and FAS), along with a simultaneous enhancement of mammary desaturase activity, by TVA.

The purpose of this paper is to increase wear resistance of aluminum.

The authors have studied the ways to improve the tribological performance of aluminum by assembling stearic acid on aluminum coated by sol-gel-derived TiO₂ film. The samples were characterized by infrared spectroscopy, contact angle measurements and a macro friction and wear tester.

Enhanced wear resistance was clearly obtained after functionalization of TiO₂ film on aluminum by stearic acid.

The relevant results might be helpful for guiding the surface modification of aluminum devices in industrial applications.

Sixteen different vinyl monomers were synthesised, based on 12‐hydroxy stearic acid in high purity. These include allyl, acrylic and methacrylic esters. These monomers were characterised by infra red spectroscopy and their purity was checked by chromatographic techniques. Boiling/melting points, refractive indices and iodine values of the products have been determined.

The purpose of this paper is to study the influence of different carbon chain lengths in coupling agents on the water resistance and compatibility of modified long afterglow phosphors and attempt to obtain their modification model and mechanism.

Three saturated-fatty-acid (caprylic, lauric, stearic acid)-based Al-Zr CAs (coupling agent) was synthesised and applied to modify the long afterglow phosphors SrMgAl₄O₈:Eu₂₊,Dy₃₊.

Results show that the coated amount on phosphors decreased from 13.41 to 6.53 per cent with the increased carbon chain length of fatty acid, and the better water resistant and suitability with organic resin can be obtained by lauric-based Al-Zr CA.

Considering that the decomposition process of modified phosphor was related with the decomposition performance of corresponding coupling agents and original phosphor, a method was first proposed to calculate the coated amount on phosphors by thermogravimetric analyser parameters.

The purpose of this paper is to explore the role of rutin, a polyphenolic flavonoid on the fatty acid composition in liver and kidney of streptozotocin (STZ)‐induced diabetic rats.

Extensive literature review was carried out and no reports on the effect of rutin on the fatty acid composition in diabetic tissues were found.

Streptozotocin‐induced diabetic rats showed altered lipid concentration in liver and kidney. The fatty acid composition was also altered in these tissues. Treatment with rutin to diabetic rats significantly decreased the concentration of palmitic acid, stearic acid and oleic acid, whereas linolenic and arachidonic acids were significantly increased in liver and kidney of diabetic rats. Rutin administration to normal rats did not show any significant effect on the fatty acid composition in liver and kidney.

This paper gives an idea of the changes in the fatty acid composition of diabetic tissues and during treatment with rutin.

Polymers which do not normally dissolve in water can usually be dispersed in sodium oleate solutions, the polymer adsorbing surfactant to give a complex similar to polymer electrolytes. Molten palmitic acid will serve as a solvent in which to polymerise acrylic compounds, and benzyl butyrate has been examined as a solvent in which to polymerise benzyl methacrylate. Ethyl palmitate has been applied to aid the reduction of the carbon tetrachloride content of solutions of chlorinated polyisoprene, when this is removed from the polymer by steam or hot water.