Search results

This study aims to provide an alternative adoption to overcome the energy crisis and environmental effluence by comparative theoretical and trial testing analysis of an innovative combined condenser unit over traditional individual condenser unit water heating systems.

The presented innovative new unit of the combined condenser heat pipe works efficiently through its improved idea and unique design, providing uniform heating to improve the heat transfer and, finally, the temperature of water increases without enhancing the cost. In this design, all these five evaporator units were connected with a single combined condenser unit in such a manner that after the condensation of heat transfer fluid vapour, it goes equally into the evaporator pipe.

The maximum temperature of hot water obtained from the combined condenser heating system was 60.6, 55.5 and 50.3°C at a water flow rate of 0.001, 0.002 and 0.003 kg/s, respectively. The first and second law thermodynamic efficiency of the combined condenser heating system were 55.4%, 60.5% and 89.0% and 2.6%, 3.7% and 4.1% at 0.001, 0.002 and 0.003 kg/s of water flow rates, respectively. The combined condenser heat pipe solar evacuated tube heating system promoting progressive performance is considered efficient and environment-friendly compared to the traditional condenser unit water heating system.

Innovative combined condenser heat pipe evacuated tube collector assembly was designed and developed for the study. A comparative theoretical and experimental energy-exergy performance analysis was performed of innovated collective condenser and traditional individual condenser heat pipe water heating system at various mass flow rate.

This paper aims to review the latest management developments across the globe and pinpoint practical implications from cutting-edge research and case studies.

This briefing is prepared by an independent writer who adds their own impartial comments and places the articles in context.

This research paper set out to explore how an Indonesian organization addressed hiring and training challenges while contributing to society through a Vocational and Education Training (VET) program. The VET intervention, “Project VALERIE,” reduced costs, provided jobs for graduates, and addressed local youth unemployment. Embracing a strategic CSR approach aligned with organizational and societal goals, creating shared value for every stakeholder. Fostering collaborative industry-education partnerships in this way bridged skill gaps and created a reliable talent pipeline. It’s a great example of a strategic win-win approach that other HR teams can replicate.

The briefing saves busy executives, strategists and researchers hours of reading time by selecting only the very best, most pertinent information and presenting it in a condensed and easy-to-digest format.

Open innovation (OI), by now one of the major concepts for the analysis of innovation, is seen as a methodology for collaboratively designing and implementing solutions by engaging stakeholders in an iterative and inclusive service design process. This paper aims to empirically investigate OI capacities, defined as a cooperative, knowledge-sharing innovation ecosystem, and to explore how it can lead to improved performance of firms in Central and Eastern European (CEE) and Southeastern European (SEE) countries.

The study builds on the World Bank/European Bank for Reconstruction and Development (EBRD’s) Business Environment Enterprise Performance Survey (BEEPS) dataset for 2009, 2013 and 2019. Primarily, the research model was estimated using log-transformed ordinary least squares (OLS). Taking into consideration that this method might produce substantial bias, yielding misleading inferences, this study is fitting Poisson pseudo maximum likelihood estimators with robust standard errors and instrumental variable/generalized method of moments estimation (IV/GMM) approach for comparative results. Secondarily, the research model was tested using structural equation modelling (SEM) to investigate the relationship between five OI capacities and firm performance.

The findings indicate that there is a significant positive relationship between most OI capacities and firm performance, except for innovation, which did not show a statistically significant relationship with firm performance. Specifically, research and development (R&D), knowledge and coopetition are statistically significant and positively associated with firm performance, whereas transformation is statistically significant but negatively associated with firm performance. The IV/GMM estimations’ findings support the view that the firm performance is significantly affected by OI capacities, together with some control variables such as size, age, foreign ownership and year dummy to have a significant impact on firm performance.

This paper fills an identified gap in the literature by investigating the impact of OI on firm performance executed in the specific CEE and SEE country context.

The purpose of this paper is to implement a closed loop regulated bidirectional DC to DC converter for an application in the electric power system of more electric aircraft. To provide a consistent power supply to all of the electronic loads in an aircraft at the desired voltage level, good efficiency and desired transient and steady-state response, a smart and affordable DC to DC converter architecture in closed loop mode is being designed and implemented.

The aircraft electric power system (EPS) uses a bidirectional half-bridge DC to DC converter to facilitate the electric power flow from the primary power source – an AC generator installed on the aircraft engine’s shaft – to the load as well as from the secondary power source – a lithium ion battery – to the load. Rechargeable lithium ion batteries are used because they allow the primary power source to continue recharging them whenever the aircraft engine is running smoothly and because, in the event that the aircraft engine becomes overloaded during takeoff or turbulence, the charged secondary power source can step in and supply the load.

A novel nonsingular terminal sliding mode voltage controller based on exponential reaching law is used to keep the load voltage constant under any of the aforementioned circumstances, and its performance is contrasted with a tuned PI controller on the basis of their respective transient and steady-state responses. The former gives a faster and better transient and steady-state response as compared to the latter.

This research gives a novel control scheme for incorporating an auxiliary power source, i.e. rechargeable battery, in more electric aircraft EPS. The battery is so implemented that it can get regeneratively charged when primary power supply is capable of handling an additional load, i.e. the battery. The charging and discharging of the battery is carried out in closed loop mode to ensure constant battery terminal voltage, constant battery current and constant load voltage as per the requirement. A novel sliding mode controller is used to improve transient and steady-state response of the system.

The purpose of this study is to explore numerical scrutinization of micropolar and Walters-B non-Newtonian fluids motion under the influence of thermal radiation and chemical reaction.

The two fluids micropolar and Walters-B liquid are considered to start flowing from the slot to the stretching sheet. A magnetic field of constant strength is imposed on their flow transversely. The problems on heat and mass transport are set up with thermal, chemical reaction, heat generation, etc. to form partial differential equations. These equations were simplified into a dimensionless form and solved using spectral homotopy analysis method (SHAM). SHAM uses the basic concept of both Chebyshev pseudospectral method and homotopy analysis method to obtain numerical computations of the problem.

The outcomes for encountered flow parameters for temperature, velocity and concentration are presented with the aid of figures. It is observed that both the velocity and angular velocity of micropolar and Walters-B and thermal boundary layers increase with increase in the thermal radiation parameter. The decrease in velocity and decrease in angular velocity occurred are a result of increase in chemical reaction. It is hoped that the present study will enhance the understanding of boundary layer flow of micropolar and Walters-B non-Newtonian fluid under the influences of thermal radiation, thermal conductivity and chemical reaction as applied in various engineering processes.

All results are presented graphically and all physical quantities are computed and tabulated.

Abnormal vibrations often occur in the liquid oxygen kerosene transmission pipelines of rocket engines, which seriously threaten their safety. Improper handling can result in failed rocket launches and significant economic losses. Therefore, this paper aims to examine vibrations in transmission pipelines.

In this study, a three-dimensional high-pressure pipeline model composed of corrugated pipes, multi-section bent pipes, and other auxiliary structures was established. The fluid–solid coupling method was used to analyse vibration characteristics of the pipeline under various external excitations. The simulation results were visualised using MATLAB, and their validity was verified via a thermal test.

In this study, the vibration mechanism of a complex high-pressure pipeline was examined via a visualisation method. The results showed that the low-frequency vibration of the pipe was caused by fluid self-excited pressure pulsation, whereas the vibration of the engine system caused a high-frequency vibration of the pipeline. The excitation of external pressure pulses did not significantly affect the vibrations of the pipelines. The visualisation results indicated that the severe vibration position of the pipeline thermal test is mainly concentrated between the inlet and outlet and between the two bellows.

The results of this study aid in understanding the causes of abnormal vibrations in rocket engine pipelines.

The causes of different vibration frequencies in the complex pipelines of rocket engines and the propagation characteristics of external vibration excitation were obtained.

Inclination angle has been reported to have an enhancing effect on the thermal-hydraulic characteristics and entropy of some thermal systems. Therefore, this paper aims to numerically investigate the effects of inclination angle, volume concentration and Reynolds number on the thermal and hydraulic characteristics and entropy generation rates of water-based Al₂O₃ nanofluids through a smooth circular aluminum pipe in a turbulent flow.

A constant heat flux of 2,000 Watts is applied to the circular surface of the tube. Reynolds number is varied between 4,000 and 20,000 for different volume concentrations of alumina nanoparticles of 0.5%, 1.0% and 2.0% for tube inclination angles of ±90o, ±60o, ±45o, ±30o and 0o, respectively. The simulation is performed in an ANSYS Fluent environment using the realizable kinetic energy–epsilon turbulent model.

Results show that +45o tube orientation possesses the largest thermal deviations of 0.006% for 0.5% and 1.0% vol. concentrations for Reynolds numbers 4,000 and 12,000. −45o gives a maximum pressure deviation of −0.06% for the same condition. The heat transfer coefficient and pressure drop give maximum deviations of −0.35% and −0.39%, respectively, for 2.0% vol. concentration for Reynolds number of 20,000 and angle ±90o. A 95%–99.8% and 95%–98% increase in the heat transfer and total entropy generation rates, respectively, is observed for 2.0% volume concentration as tube orientation changes from the horizontal position upward or downward.

Research investigating the effect of inclination angle on thermal-hydraulic performance and entropy generation rates in-tube turbulent flow of nanofluid is very scarce in the literature.

To guide the stable radius clearance choice of water-lubricated bearings for single screw compressors, this paper aims to analyze the effects of turbulence and cavitation on bearing performance under two conditions of specified external load and radius clearance.

A modified Reynolds equation considering turbulence and cavitation is adopted, based on the Jakobsson–Floberg–Olsson boundary condition, Ng–Pan model and turbulent factors. The equation is solved using the finite difference method and successive over-relaxation method to investigate the bearing performance.

The turbulent effect can increase the hydrodynamic pressure and cavitation. In addition, the turbulent effect can lead to an increase in the equilibrium radius clearance. The turbulent region exhibits a higher load capacity and cavitation rate. However, the increased cavitation negatively impacts the frictional coefficient and end flow rate. The impact of turbulence increases as the radius clearance decreases. As the rotating speed increases, the turbulence effect has a greater impact on the bearing characteristics.

The research can provide theoretical support for the design of water-lubricated journal bearings used in high-speed water-lubricated single screw compressors.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-01-2024-0029/

Every business company deals with the dilemma of how much to invest in long-term (LT) versus short-term (ST) problem (LTvST problem). LT operations increase the reputation of the company, and revenue is rewarded in the future. In contrast, ST operations result in immediate rewards. Thus, every organization faces the dilemma of how much to invest in LT versus ST activities. The former deals with the “what” or effectiveness, and the latter deals with the “how” or efficiency. The role of managers is to solve this dilemma; however, they often fail to do so, mainly because of a lack of knowledge. This study aims to propose a dynamic optimal control model that formulates and solves the LTvST problem.

This study proposes a dynamic optimal control model that formulates and solves the dilemma whether to invest in short- or LT operations.

This model is illustrated as an example of an academic institute that wants to maximize its reputation. Investing in effectiveness in the academy translates into investing in research, whereas investing in efficiency translates into investing in teaching. Universities and colleges with a good reputation attract stronger candidates and benefit from higher tuition fees. Steady-state conditions and insightful observations were obtained by studying the optimal solution and performing a sensitivity analysis.

To the best of the authors’ knowledge, this paper is the first one to explore the optimal strategy when trying to maximize the short and LT activities of a company and solve the LTvST problem. Furthermore, it is applied on universities where teaching is the ST activity and research the LT activity. The insights gleaned from the application are relevant to many different fields. The authors believe that the paper makes a significant contribution to academic literature and to business managers.