Search results

This study aims to provide a salt ready-mix to instant fried noodles manufacturers.

Response surface methodology was used to get optimized salt ready-mix based on carbonate salt, disodium phosphate, tripotassium phospahte, sodium hexametaphosphate and sodium chloride. Peak viscosity of flour and yellowness, cooking loss and hardness of noodles were considered as response factors for finding optimized salt formulation.

The results showed that salts have an important role in governing quality of noodles. Optimum levels of five independent variables of salts, namely, carbonate salt (1:1 mixture of sodium to potassium carbonate), disodium phosphate, sodium hexametaphosphate, tripotassium phosphate and sodium chloride were 0.64%, 0.29%, 0.25%, 0.46% and 0.78% on flour weight basis, respectively.

To the best of the authors’ knowledge, this is the first study to assess the effect of different combinations of different salts on the quality of noodles. These findings will also benefit noodle manufacturers, assisting in production of superior quality noodles.

This purpose of this study was to assess dietary diversity among women of reproductive age (WRA) and the associations between consumption of a diversified diet and overweight/obesity statuses in Ekiti State, Nigeria.

Cross-sectional study of 207 WRA from six local government areas in Ekiti State, Nigeria, was done. A validated interviewer-administered questionnaire was used to collect data on sociodemographic characteristics, dietary intake and anthropometry. Dietary intake was assessed with 24-h dietary recall to calculate the Minimum Dietary Diversity Score for Women (MDD-W). Data were analyzed using descriptive statistics, Spearman rank correlation and Chi square test at α_0.05.

Majority of the participants (65.2%) were aged between 19 and 34 years, 58.5% were married and 49.8% had high school as their highest level of education. Mean MDD-W and body mass index (BMI) were 3.8 ± 0.9 and 25.46 ± 6.4 kg/m², respectively. All participants (100%) consumed foods from the “grains, white roots and tubers” group and majority also from the “meat and poultry” group (79.7%) but ranked low in the consumption of foods from other food groups. Many were overweight (34.8%), obese (14.0%) and a few (1.9%) had morbid obesity. MDD-W was significantly associated with marital status (X² = 7.7, P = 0.022) and BMI (X² = 11.4, P = 0.023) and had a weak positive correlation with BMI (r = 0.189, P = 0.007).

Study shows that both undernutrition and overweight/obesity coexist in the population, indicating a case of double burden of malnutrition (DBM) at a population level. However, further studies may be needed to investigate the extent of DBM at individual levels. Although there was a positive correlation between MDD-W and BMI, it cannot be used to predict causality. Study further reveals that the micronutrient intake of the WRA population in Ekiti is inadequate. Considering the importance of the 10 food groups highlighted in MDD_W to nutrition and health, the promotion of the consumption of foods from these food groups with more attention to the micronutrient-rich ones needs to be heightened.

Diet of participants was not diverse enough, indicating micronutrient inadequacy. Promotion of the consumption of a diverse diet, particularly from the food groups rich in micronutrient, needs to be heightened, while food groups high in calorie should be minimally consumed to forestall DBM.

The purpose of this study is to determine the viability of Lacticaseibacillus rhamnosus GR-1 (L. rhamnosus GR-1) in five yogurt samples with or without quinoa, chickpea, soybean and rice flour over various fermentation periods and refrigerated storage durations, with a focus on exploring the potential of functional foods, which provide health benefits beyond nutritional value. Additionally, the study aimed to evaluate consumer acceptance of yogurt fortified with functional flour. Using a nine-point hedonic scale, from 1 (dislike extremely) to 9 (like extremely), participants rated appearance, flavour, texture and overall acceptability.

The samples were inoculated with the probiotic strain L. rhamnosus GR-1 and fermented for 0, 2, 4 and 6 h at 38°C, followed by refrigerated storage at 4°C for 1, 15 and 30 days, respectively. Microbial enumeration was performed throughout fermentation and storage to assess the viability of L. rhamnosus GR-1. A sensory evaluation involving 86 participants was conducted to assess the consumer acceptability of the yogurt samples.

Notably, L. rhamnosus GR-1 achieved viable counts of 108 colony-forming units per mL in all treatments at all fermentation time points. Over the 30-day storage period, no statistically significant differences (p < 0.05) in average pH values were observed among the five treatments, and within each treatment, pH levels remained stable, with an overall mean of 4.2 ± 0.64. Treatment 4, which featured rice flour fortification, received higher hedonic scores from sensory panellists in terms of appearance, flavour, texture and overall acceptability. These findings indicate that incorporating functional flours in conjunction with cow’s milk effectively promotes and preserves the viability of L. rhamnosus GR-1 in yogurt.

Exploring the potential of probiotic yogurt enriched with diverse functional flours to enhance nutritional content and health benefits as well as attract new consumers, this study addressed a critical gap in understanding consumer perceptions and generated insights for creating innovative and health-promoting dairy products.

In pursuit of affordable and nutrient-rich food alternatives, the symbiotic culture of bacteria and yeast (SCOBY) emerged as a selected food ink for 3D printing. The purpose of this paper is to harness SCOBY’s potential to create cost-effective and nourishing food options using the innovative technique of 3D printing.

This work presents a comparative analysis of the printability of SCOBY with blends of wheat flour, with a focus on the optimization of process variables such as printing composition, nozzle height, nozzle diameter, printing speed, extrusion motor speed and extrusion rate. Extensive research was carried out to explore the diverse physical, mechanical and rheological properties of food ink.

Among the ratios tested, SCOBY, with SCOBY:wheat flour ratio at 1:0.33 exhibited the highest precision and layer definition when 3D printed at 50 and 60 mm/s printing speeds, 180 rpm motor speed and 0.8 mm nozzle with a 0.005 cm³/s extrusion rate, with minimum alteration in colour.

Food layered manufacturing (FLM) is a novel concept that uses a specialized printer to fabricate edible objects by layering edible materials, such as chocolate, confectionaries and pureed fruits and vegetables. FLM is a disruptive technology that enables the creation of personalized and texture-tailored foods, incorporating desired nutritional values and food quality, using a variety of ingredients and additions. This research highlights the potential of SCOBY as a viable material for 3D food printing applications.

Everyone is extremely concerned about environmental protection and health safety due to the rise in living standards. Plant-derived natural dyes have garnered much industrial attention in food, pharmaceutical, textile, cosmetics, etc. owing to their health and environmental benefits. The present study aims to focus on the elimination of the use of synthetic dyes and provides brief information about natural dyes, their sources, extraction procedures with characterization and various advantages and disadvantages.

In producing natural colors, extraction and purification are essential steps. Various conventional methods used till date have a low yield, as these consume a lot of solvent volume, time, labor and energy or may destroy the coloring behavior of the actual molecules. The establishment of proper characterization and certification protocols for natural dyes would improve the yielding of natural dyes and benefit both producers and users.

However, scientists have found modern extraction methods to obtain maximum color yield. They are also modifying the fabric surface to appraise its uptake behavior of color. Various extraction techniques such as solvent, aqueous, enzymatic and fermentation and extraction with microwave or ultrasonic energy, supercritical fluid extraction and alkaline or acid extraction are currently available for these natural dyes and are summarized in the present review article.

If natural dye availability can be increased by the different extraction measures and the cost of purified dyes can be brought down with a proper certification mechanism, there is a wide scope for the adoption of these dyes by small-scale dyeing units.

The major objective of this research work was to evaluate various physico-chemical characteristics, such as, chemical composition, antioxidant capacity, objective color and texture profile analysis (TPA) of the wheat flour/chickpea flour (CF) blends, so that nutritious baked products could be consumed by the type-2 diabetic persons.

Wholegrain wheat flour (WGF) and white wheat flour (WWF) were substituted with CF at 0 to 40% levels. These wheat flour/CF blends were analyzed for proximate composition, the prepared dough and baked breads were tested for objective color, antioxidant capacity as trolox equivalent antioxidant capacity (TEAC), malondialdehyde (MDA) and total phenolic content (TPC) and TPA.

WGF had the highest TEAC (117.42 mM/100g) value, followed by WWF (73.98 mM/100g) and CF (60.67 mM/100g). TEAC, MDA and TPC values varied significantly among all the three flour samples.

Inclusion of whole chickpea (without dehulling) flour in such type of blends would be another interesting investigation during the future research studies.

These research findings have a great potential for the production of these baked products for human consumption on an industrial scale.

Production of breads using wheat flour and CF blends would benefits the consumers.

Production of Arabic and pan breads using wheat flour and CF blends would, therefore, combine the benefits of both the needed proteins of plant origin and the health-promoting bioactive compounds, in a most sustainable way for the consumers.

With the empirical evidence on the purchase behaviour of tinned tomatoes, food labelling and the safety consciousness of consumers in Ghana were examined.

Primary data were obtained from 130 consumers. Descriptive statistics, factor analysis and multinomial probit analysis were applied.

Consumers use tinned tomatoes for cooking because of its easy accessibility in nearby shops, guaranteed constant supply, attractive package, it being affordable/cheaper, its better colour, advertisement/promotion, and longer shelf life. There is a low level of food safety consciousness among consumers since only one-fifth read labels on tinned tomatoes very often, and one-fifth do not read labels at all. Consumers frequently check on tinned tomatoes' most essential information: brand/type, manufacturing and expiry dates, and weight/volume. Age, residential status, contact information, nutritional benefits and affordability influence the choice of retail brand of tinned tomatoes. The health label consumer segment and conventional label consumer segment were identified, with the majority being the former.

The sample size used for the study could be improved in terms of number and geographical coverage. This is because the study was limited to only one main urbanised area in Ghana. Therefore, it will be worthwhile for a further study to be conducted by comparing urban and rural consumers in Ghana and other countries within Africa, to either validate or reveal a different trajectory of consumer behaviour relevant to marketing, policy and practice.

Tomato paste (tinned tomatoes) is consumed in almost all homes in Africa, but there are food scare concerns about tinned tomatoes due to reported cases of adulteration with unhealthy materials such as starch and food colour, leading to negative health implications on consumers. This makes the reading of tinned tomato labels very crucial. Thus, it is of policy relevance to investigate consumers' reading behaviour of label information on tinned tomatoes in Ghana. However, previous studies on food labelling focussed on food and nutrition labelling and implications of food labelling on consumers' purchase behaviour, with most of them outside Africa.

The purpose of this study is to investigate the thermomechanical condition on the shape memory property of Polybutylene adipate-co-terephthalate (PBAT). PBAT is a widely researched and rapidly developed biodegradable copolyester. In a tensile test, we found that the fractured PBAT samples had a heat-driven shape memory effect which piqued our interest, and it will lay a foundation for the application of PBAT in new fields (such as heat shrinkable film).

The shape memory effect of PBAT and the effect of the thermomechanical condition on its shape memory property were confirmed and systematically investigated by a thermal mechanical analyzer and tensile machine.

The results showed that the PBAT film had broad shape memory transform temperature and exhibited excellent thermomechanical stability and shape memory properties. The shape memory fixity ratio (Rf) of the PBAT films was increased with the prestrain temperature and prestrain, where the highest Rf exceeded 90%. The shape memory recovery ratio (Rr) of the PBAT films was increased with the shape memory recovery temperature and decreased with the prestrain value, and the highest Rr was almost 100%. Moreover, the PBAT films had high shape memory recovery stress which increased with the prestrain value and decreased with the prestrain temperature, and the highest shape memory recovery stress can reach 7.73 MPa.

The results showed that PBAT had a broad shape memory transform temperature, exhibited excellent thermomechanical stability and shape memory performance, especially for the sample programmed at high temperature and had a larger prestrian, which will provide a reference for the design, processing and application of PBAT-based heat shrinkable film and smart materials.

This study confirmed and systematically investigated the shape memory effect of PBAT and the effect of the thermomechanical condition on the shape memory property of PBAT.

This study aims to characterize the properties of natural cellulose fiber from the pseudo-stems of the curcuma zedoaria plant.

The fiber was extracted using the biological retting process (cold-water retting). The intrinsic fiber properties obtained were used to evaluate the possibility of using fiber for textile applications.

The average length of a curcuma zedoaria fiber was 34.77 cm with a fineness value of 6.72 Tex. A bundle of curcuma zedoaria fibers was comprised of many elementary fibers. Curcuma zedoaria had an irregular cross-section, with the lumen having a varied oval shape. Curcuma zedoaria fibers had tenacity and elongation value of 3.32 gf/denier and 6.95%, respectively. Curcuma zedoaria fibers had a coefficient of friction value of 0.46. Curcuma zedoaria fibers belong to a hygroscopic fiber type with a moisture regain value of 10.29%.

Extraction and Characterization of Curcuma zedoaria Pseudo-stems Fibers for Textile Application.

Particles are of the controlled release delivery systems. Also, topically applied olive oil has a protective effect against ultraviolet B (UVB) exposure. Due to its sensitivity to oxidation, various studies have investigated the production of olive oil particles. The purpose of this study was to use chitosan and sodium alginate as the vehicle polymers for olive oil.

The gelation method used to prepare the sodium alginate miliparticles containing olive oil and particles were coated with chitosan. Morphology and size, zeta potential, infrared spectrum of olive oil miliparticles, encapsulation efficiency and oil release profile were investigated. Among 12 primary fabricated formulations, formulations F₅ (olive oil loaded alginate miliparticles) and F₁₁ (olive oil loaded alginate miliparticles + chitosan coat) were selected for further evaluations.

The size of the miliparticles was in the range of 1,100–1,600 µm. Particles had a spherical appearance, and chitosan coat made a smoother surface according to the scanning electron microscopy. The zeta potential of miliparticles were −30 mV for F₅ and +2.7 mV for F₁₁. Fourier transform infrared analysis showed that there was no interaction between olive oil and other excipients. Encapsulation efficiency showed the highest value of 85% in 1:4 (olive oil:alginate solution) miliparticles in F₁₁. Release study indicated a maximum release of 68.22% for F₅ and 60.68% for F₁₁ in 24 h (p-value < 0.016). Therefore, coating with chitosan had a marked effect on slowing the release of olive oil. These results indicated that olive oil in various amounts can be successfully encapsulated into the sodium-alginate capsules cross-linked with glutaraldehyde.

To the best of the authors’ knowledge, no study has used chitosan and sodium alginate as the vehicle polymers for microencapsulation of olive oil.