Search results

The purpose of this paper is to investigate the distribution characteristics of airflow in mine ventilation suits with different pipeline structures when the human body is bent at various angles. On this basis, the stress points are extracted to investigate the pressure variation of a ventilation suit under different ventilation rates and pipeline structures.

Based on the three-dimensional human body scanner, portable pressure test and other instruments, a human experiment was conducted in an artificial cabin. The study analyzed and compared the distribution characteristics of clearance under three different pipeline structures, as well as the pressure variation of the ventilation suit.

The study found that the clearance in front of two pipeline structures gradually increased in size as the degree of bending increased, and there was minimal clearance in the chest and back. The longitudinal structure exhibits a significant decrease in clearance compared to the spiral structure. The pressure value of the spiral pipeline structure with the same ventilation volume is low, followed by the transverse structure, while the longitudinal structure has the highest pressure value. The increase in clothing pressure value of a spiral pipeline structured ventilation suit with varying ventilation volumes is minimal.

The ventilation suit has a promising future as a type of personal protective equipment for mitigating heat damage in mines. It is of great value to study the pipeline structure of the ventilation suit for human comfort.

This study aims to investigate the effects of organizational culture factors on the selection of software process development models and develops a conceptual model for selecting and adopting process development models with an organizational culture approach, using 12 criteria and their sub-criteria defined in Fey and Denison’s model (12 criteria).

The research hypotheses were investigated using statistical analysis, and then the criteria and sub-criteria were selected based on Fey and Denison’s model and the experts’ viewpoints. Afterward, the organizational culture of the selected company was measured using the data from 2016 and 2017, based on Fey and Denison’s questionnaire. Due to the correlation between the criteria, using the decision-making trial and evaluation technique, the correlation between sub-criteria were determined, and by analytical network process method and using Super-Decision software, the process development model was preferred to the 12 common models in information systems development.

Results indicated a significant and positive effect of organizational culture factors (except the core values factor) on the selection of development models. Also, by changing the value of organizational culture, the selected process development model changed either. Sensitivity analysis performed on the sub-criteria implied that by changing and improving some sub-criteria, the organization will be ready and willing to use the agile or risk-based models such as spiral and win-win models. Concerning units where the mentioned indicators were at moderate and low limits, models such as waterfall, V-shaped and incremental worked more appropriately.

While many studies were performed in comparing development models and investigating their strengths and weaknesses, and the impact of organizational culture on the success of information technology projects, literature indicated that the impact of organizational sub-culture prevailing in the selection of development process models has not been investigated. In this study, new factors and indicators were addressed affecting the selection of development models with a focus on organizational culture. Correlation among the factors and indicators was also investigated and, finally, a conceptual model was proposed for proper adoption of the models and methodologies of system development.

This paper aims to introduce a model using a digital twin concept in a cold heading manufacturing and develop a digital visual management (VM) system using Lean overall equipment effectiveness (OEE) tool to enhance the process performance and establish Fourth Industrial Revolution (I4.0) platform in small and medium enterprises (SMEs).

This work utilised plan, do, check, act Lean methodology to create a digital twin of each machine in a smart manufacturing facility by taking the Lean tool OEE and digitally transforming it in the context of I4.0. To demonstrate the effectiveness of process digitisation, a case study was carried out at a manufacturing department to provide the data to the model and later validate synergy between Lean and I4.0 platform.

The OEE parameter can be increased by 10% using a proposed digital twin model with the introduction of a Level 0 into VM platform to clearly define the purpose of each data point gathered further replicate in projects across the value stream.

The findings suggest that researchers should look beyond conversion of stored data into visualisations and predictive analytics to improve the model connectivity. The development of strong big data analytics capabilities in SMEs can be achieved by shortening the time between data gathering and impact on the model performance.

The novelty of this study is the application of OEE Lean tool in the smart manufacturing sector to allow SME organisations to introduce digitalisation on the back of structured and streamlined principles with well-defined end goals to reach the optimal OEE.

Though the concept of work engagement has been extensively explored in the academic literature, however, with engagement levels declining globally – causing hike in undesired employee attitudes and behaviours – there is a need to revisit its antecedents and consequences that bear higher current relevance. Within the context of the Indian information technology (IT) sector, this study aims to explore the role of job security and value congruence as two critical antecedents which not only lead to increased engagement levels but also consequently yield the enhanced perception of change, amplified general life satisfaction and reduced intent to leave among employees.

Data were collected from 363 software developers (SDs) in India using the survey questionnaire method and structured equation modelling was used to test the proposed measurement and structural model. The results supported the proposed hypotheses and confirmed the role of work engagement as a mediator between the studied antecedents and consequences.

Results from a study of 363 SDs across India support the proposed hypotheses and confirm the role of work engagement as a mediator between the studied antecedents and consequences.

This study was cross-sectional; therefore, caution is necessary while making any causal inferences. Further work based on longitudinal data would strengthen these findings.

The findings of the study will provide the decision-makers of IT companies with tools to increase engagement among SDs thereby increasing favorable outcomes for organizations and individual employees in the current times.

The study establishes job security and value congruence, as two critical yet cost-effective measures that today’s organization need to integrate into its human resources functions not just to boost employee engagement levels but also to control spiraling costs due to unintended turnover, employee’s resistance of organizational changes and employee ill-being. Future research avenues and practical implications have been discussed.

This paper addresses a significant research gap in the study of Rayleigh surface wave propagation within a piezoelectric medium characterized by piezoelectric properties, thermal effects and voids. Previous research has often overlooked the crucial aspects related to voids. This study aims to provide analytical solutions for Rayleigh waves propagating through a medium consisting of a nonlocal piezo-thermo-elastic material with voids under the Moore–Gibson–Thompson thermo-elasticity theory with memory dependencies.

The analytical solutions are derived using a wave-mode method, and roots are computed from the characteristic equation using the Durand–Kerner method. These roots are then filtered based on the decay condition of surface waves. The analysis pertains to a medium subjected to stress-free and isothermal boundary conditions.

Computational simulations are performed to determine the attenuation coefficient and phase velocity of Rayleigh waves. This investigation goes beyond mere calculations and examines particle motion to gain deeper insights into Rayleigh wave propagation. Furthermore, this investigates how kernel function and nonlocal parameters influence these wave phenomena.

The results of this study reveal several unique cases that significantly contribute to the understanding of Rayleigh wave propagation within this intricate material system, particularly in the presence of voids.

This investigation provides valuable insights into the synergistic dynamics among piezoelectric constituents, void structures and Rayleigh wave propagation, enabling advancements in sensor technology, augmented energy harvesting methodologies and pioneering seismic monitoring approaches.

This study formulates a novel governing equation for a nonlocal piezo-thermo-elastic medium with voids, highlighting the significance of Rayleigh waves and investigating the impact of memory.

This paper aims to help higher education institutions (HEIs) develop a better understanding of student support and services needs, thereby enabling them to allocate limited resources for initiatives that effectively improve student experience.

An assessment framework following the Kano analysis is developed to categorize student service features based on customer satisfaction and need fulfillment. The framework is used at a local university, using 23 service features listed as minimum requirements by the national regulatory body for education. Analysis of the satisfaction survey results and prioritization are based on quality indices derived from a factor of importance and the satisfaction gap. A survey was conducted for two academic years to generate a comparison of results.

Of the list mandated as minimum requirements for HEIs, the study revealed that no features were regarded as “must-be,” eight as performing, 14 as attractive and one as indifferent by the students. As these results were disaggregated per year level, the natural decay of delight as in the Kano theory was exhibited as there were less attractive features for students who have been in the university longest. After a full-year academic cycle, results compared to the baseline figures seemed to reveal of impact of the achievement of performance targets by the units rendering specific activities on client satisfaction.

Further rounds of the study are needed to build up more data sets on the relationship between objective performance and satisfaction level for performing features, mindful that this categorization is also bound to change along the way.

As HEIs in the Philippines journey towards the establishment of their own respective internal quality assurance systems, this study provides a practical approach for institutions to transform a mere list of student services for compliance into a strategic tool to enhance the student experience.

In the context of continuous quality improvement, the study presents how the qualitative Kano model, along with simple quantitative tools in the methodology, can be utilized not only in the planning stage of service design but also in closing the planning, doing, checking and acting (PDCA) cycle and opening the quality improvement spiral.

Microenterprises (MEs) are vital to the growth and prosperity of economies around the world. All levels of society, from universities to national governments, have collaborated to improve the chances of survival and future growth of these businesses. The threat to life is serious, and unless concerted action is taken, the situation will spiral out of control. Policymakers and business leaders must work together to address the sustainability crisis. The study, therefore, set out to determine how various entrepreneurial skills (such as creativity, collaboration, networking, and risk-taking) affect the long-term viability of MEs. The overall objective of the study was to determine the importance of innovative problem-solving, collaboration, networking, and willingness to take calculated risks of microentrepreneurs for the long-term success of their businesses. A total of 274 microentrepreneurs in rural areas of the Ancash region of Peru were surveyed in the grocery, hardware, clothing, and food service sectors. The survival of the MEs was tested on four dimensions: innovation, leadership, networking, and risk-taking. According to the results, MEs managers can increase their longevity by cultivating creative skills, strengthening leadership as a key to business sustainability and survival, maximizing the use of networks to gain a market advantage and expand their customer base, and employing calculated risk-taking.

This study aims to research the influence mechanism of microtextured geometric parameters of dry gas seal end face on the tribological behavior under dry frictional conditions.

The microtexture was processed using laser processing, while the diamond-like carbon (DLC) film was applied through magnetron sputtering; the experimental platform of friction vibration was established, the frictional and vibrational properties of different geometric parameters were tested; the data signals of vibrational acceleration and frictional torque were collected and processed using data acquisition instrument. The entropy characteristic parameters of 3D vibrational acceleration were extracted based on wavelet packet decomposition method. The end-face topography was measured with ST400 three-dimensional noncontact surface topography instrument.

The geometry of pits plays a key role in influencing friction performance; the permutation entropy and fuzzy entropy of the vibration acceleration signal changed with variations in microtextured parameters. A textured surface with appropriately size parameters can trap debris, enhance the dynamic pressure effect, reduce impact between the friction interfaces and improve the frictional vibrational performance. In this research, microtextured surface with Φ150 µm-10% and Φ200 µm-5% can effectively reduce friction and vibration between the end faces of a dry gas seal.

DLC film improves the hardness of seal ring end face, and microtexture improves the dynamic effect; the tribological behavior monitoring can be realized by analyzing the characteristics of vibration acceleration sensitive parameter with friction state. The findings will provide a basis for further research in the field of tribology and the microtexture optimization of dry gas seal ring end face.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-12-2023-0389/

To make more smart health-care system, the health-care data should be shared in the secure manner, and it improves health-care service quality. This paper aims to implement a modern decentralized blockchain, safe and easy-to-use health-care technology application in the cloud.

On observing the graph, the convergence analysis of proposed Levy Flight-integrated moth flame optimization method at 80th iteration was 4.59%, 2.80%, 3.316%, 8.92% and 2.55% higher than the traditional models MFO, artificial bee colony (ABC), particle swarm optimization (PSO), moth search algorithm (MSA) and glow worm swarm optimization (GWSO), respectively, for Hungarian data set. Particularly, in best case scenario, the adopted method attains low cost value (5.672671) when compared to all other traditional models such as MFO (5.727314), ABC (5.711577), PSO (5.706499), MSA (5.764517) and GWSO (5.723353).

The proposed method achieved effective performance in terms of key sensitivity, sanitization effectiveness, restoration effectiveness, etc.

This study aims to investigate the influence mechanism of expatriates' cultural intelligence (CQ) on expatriate effectiveness (task performance and premature return intention), identifying work engagement as a mediator and cultural distance as a boundary condition.

Drawing on the conservation of resource theory and the person–environment fit (P–E fit) theory, a moderated mediation model is built. Working with a sample of 303 international construction expatriates collected by snowball sampling, the hypotheses are tested by using the structural equation model analysis.

Work engagement partially mediates the relationship between expatriates' CQ and task performance, as well as fully mediates the relationship between expatriates' CQ and premature return intention. Cultural distance moderates the positive relationship between CQ and work engagement, as well as moderates the mediating effects of work engagement.

The impacts of potential moderators (e.g. work–family conflict and organizational culture) on the relationship between CQ and expatriate effectiveness have not been considered in this study.

This study is useful for international construction firms to optimize the allocation of human resources.

This study contributes to the expatriate literature by adding empirical evidence to explain the influence mechanism of expatriates' CQ on expatriate effectiveness.