Search results

The object of this research is the reconstruction of the existing legal response by European Union states to the phenomenon of immigration. It seeks to analyse the process of conferral of protection.

One main dimension is selected and discussed: the case law of the national courts. The study focuses on the legal status of immigrants resulting from the intervention of these national courts.

The research shows that although the courts have conferred an increasing protection on immigrants, this has not challenged the fundamental principle of the sovereignty of the states to decide, according to their discretionary prerogatives, which immigrants are allowed to enter and stay in their territories. Notwithstanding the differences in the general constitutional and legal structures, the research also shows that the courts of the three countries considered – France, Germany and Spain – have progressively moved towards converging solutions in protecting immigrants.

The research contributes to a better understanding of the different legal orders analysed.

The purpose of this paper is to evaluate the effect that polymer coat has on the impact behavior of grinding sphere and to find possible subsection of parameter space in which grinding sphere wear could be reduced.

Numerical analysis is based on axisymmetric finite elements that were developed using symbolic tool AceGen. Comparing stress response of elastic and visco‐elastic material revealed that for high strain rates observed in impacts both behave the same and that is why elastic elements were used in simulations.

Impact velocity, coat thickness and polymer material properties were varied in a parametric case study of polymer‐coated sphere impact. Decrease of the pressure on the surface of grinding sphere indicates that polymer layer can be effective in reducing grinding media wear, but in order to maintain adequate impact pressure to do the grinding the impact velocity has to be increased. Both upper and lower limit for impact velocity were determined for some arbitrary pressure threshold values. This shows that combining measured threshold values of specific material with results from presented numerical tool could provide valuable guides for finding optimum stirred media milling operation parameters.

In this work, the authors develop numerical tools with the aim of supporting experimental development of polymer coat capable of reducing grinding media wear.

To study the nature of scuffing in boundary lubricated sliding contacts with subsurface plastic deformation, as it occurs in plastic deformation processing.

Low speed oblique plastic impact testing (LOSOPIT) has been conducted on copper specimen with a hard En31 ball in a test rig that has facility to measure the coefficient of friction. Based on the findings of friction coefficient in these experiments, friction power has been estimated and was found to be in the typical range. Scuffing studies were undertaken both by observation of the slid surface of En31 sphere in a ferrographic microscope with camera facility as well as by calculation of the friction power.

The boundary lubricant was found to have profound role in safeguarding the surface from severe deformation and micro‐cracks. Scanning electron microscope (SEM) examination of the craters produced by LOSOPIT has given evidence that using the boundary lubricant resulted in smooth transfer of shear stress from the sphere to the specimen surface through the boundary lubricant layer. Owing to this, the asperities have been found flattened in a smooth manner instead of metal at the surface being scuffed. A limited amount of reduction was found in the coefficient of friction due to the use of boundary lubricant from that in the dry testing.

The model used to estimate the friction power is predominantly governed by the friction coefficient itself rather than either the normal load or the sliding speed. Friction coefficient itself may be contributed by various mechanisms all of which may not equally contribute to scuffing. Study is underway to carefully glean out those components of friction that exactly result in scuffing, and to use more effective criteria for scuffing.

The knowledge and data developed in the paper give a clear explanation of conditions under which scuffing can take place in sliding contacts operating under boundary regime. The most important applications are metalforming and metal cutting. It is relevant to mechanical engineering machinery in which intense contact pressures are expected.

This paper fills the gap of lack of scuffing studies in plastic deformation processing. All earlier studies focused on elastic conditions prevailing at the contact. Since, industry has been witnessing a need to tackle the severe problems related to formed product quality and certain defects hitherto unexplained, this paper gives a new direction to explain the defects in products from scuffing point of view. In this paper, it has been shown that friction power can be a good criterion to represent scuffing intensity in boundary lubrication.

The purpose of this article is to discuss the concepts confidentiality and transparency in the context of good governance.

After exploring the concepts of confidentiality, good governance and other relevant concepts, they are related to each other.

When it comes to good governance, transparency is overrated and confidentiality is taken for granted. For good governance, there must be a balance between the two to preserve the public sphere.

The paper contributes to the understanding of good governance and the evolution of the public sphere.

This paper aims to provide an action-orientated reflection for promoting gender equality in hospitality, based on Bradley’s (2013) approach that considers the operation of gender in the “production” and “reproduction” spheres of social life. To that end, it reflects on women’s career development in hospitality based on the Western perspective.

A two-stage thematic analysis of a public research seminar on gender issues in tourism and hospitality were used to explore issues of women’s career development within the intertwining spheres of “production” and “reproduction”.

Three themes, namely, culture of an open dialogue, bringing men into the equation and educating the future workforce, emerged from data to propose new insights on “what can be done” about gender equality in tourism and hospitality, including practical suggestions for transformations of gender relations in organisations.

This paper contributes new knowledge on women’s career development in the hospitality industry by proposing recommendations to address gender gaps including fostering a culture of an open dialogue based on an inclusive listening environment, recommending changes to organisational policies and culture and integrating the subject of gender into tourism and hospitality curriculum.

By proposing a sociological perspective of gender in hospitality employment informed by Bradley (2013), this study challenges the traditional masculinity and the long-standing gender labour division through education, organisational and daily practices thus tackling fundamental gender issues.

Research on work–life interface in the expatriation context has to date focused on expatriates relocating with a family, and the work–life experiences of single and childless expatriates remain largely unexplored. This is particularly relevant for women, as female expatriates appear to be more often single than their male counterparts and have children less often. The aim of this paper is, therefore, to examine the specific work–life experiences of single and childless female expatriates who are working and living in the French-speaking part of Switzerland.

A qualitative research design has been adopted for this exploratory study. Data was collected through semi-structured face-to-face interviews with 20 single and childless female expatriates living and working in the French-speaking part of Switzerland.

Our findings identify a set of personal, work-related, and social and cultural factors contributing to single and childless female expatriates’ conflict and enrichment between work and nonwork spheres, as well as a range of sources and types of social support they rely upon. Our findings demonstrate that work–life issues are also exacerbated for single and childless women in the international context.

This study is the first dedicated to the examination of specific work–life issues of single and childless women in the expatriate context. By revealing the specificities of their work–life experiences, this study contributes to the fields of (female) expatriate research and work–life research and advances current knowledge on nontraditional expatriates.

The aim of this paper is to give a simple and accurate tool for prediction and comparison of residual stresses in laser shock peened and shot peen treated materials.

This work applies finite element code ABAQUS in order to compare the residual stress state and plastic deformation in specimens in aluminium alloy 7050‐T7451, treated with shot peening (SP) and laser shock peening (LSP) processes. Both processes are simulated using the Hugoniot elastic limit (HEL) of the material in question, and the processes are modelled using same input parameters (pressure on the surface of the specimen and the duration of contact between the material and the peening medium).

By using the same approach in both the analyses, a sound comparison of two technologies can be made, by comparing the obtained residual stress profiles. In addition, surface pressure and contact time can be varied easily in a parametric analysis, allowing the calibration of the numerical results.

Owing to simplicity of used numerical models, different process parameters relative to SP process have not been taken in consideration directly, but through their effect on pressure on the surface of the specimen and the duration of contact between the material and the peening medium.

Application of HEL material model, usually applied to LSP problems, to the analysis of SP process gives promising results, in spite of simplicity of used numerical model.

The purpose of this paper is to indicate the place of assessment of the impact of libraries in the overall quality evaluation of these institutions. In the paper, an attempt has been made to separate the concepts of the impact and values of library services and, according to the designated scope, the most important areas of research, methods and indicators for the assessment of the impact of academic libraries were characterized. The focus was on the most important areas, i.e. on the impact of libraries on didactics and academic research, information literacy and on its assessment in the cultural and environmental aspect.

A literature-based overview of actual insights on tasks and areas, methods, indicators research on the impact of academic is provided.

The author has determined that the analysis of the impact of academic libraries can mainly concern the following areas: information (influence on didactics, research and information competence of users), cultural and environmental. That is why it is worth analyzing the most important methods and indicators of research on the impact of academic libraries in these areas. The best way to research the quality of libraries, and especially to determine its impact on users and the environment, is to use a mixed methodology – a whole set of quantitative and qualitative methods and techniques. Triangulation can involve the use of both qualitative and quantitative data or the use of multiple methods to develop one type of data.

However, these methods were used to study the impact of academic libraries, whose results do not determine the financial value.

The paper shows the methods of research on the quality of the functioning of academic libraries with a special emphasis on the study of their impact on users and the social environment.

The paper shows the methodology of determining the social role of academic libraries.

The paper intends to add to the body of knowledge about the research methodology for the impact of academic libraries.

Oblique impacts which occur in many situations in mineral industries leads to material removal and fail of mechanical parts. Studies will be helpful in optimal design to have minimum machine malfunctions.

In the present work, the Hertz-Di Maio Di Renzo nonlinear model of contact is used to simulate the impact phenomenon as a micro-sliding process. The modified Archard equation is used to evaluate wear over the impact. The wear coefficient is evaluated by a pin-disk machine. An impact-wear tester is used to validate the model results.

The measurements indicate an increase in surface hardness because of the several impacts. It is considered in the wear predictive model.

The model predictions compared with the experimental data, obtained from the impact-wear tester, show that the model well predicts the impact wear and can be used as a predictive tool to study the practical design problems and to explain some phenomena associated with the percussive impact.

The purpose of this research is to examine the interactions between individuals and the social environment as individuals engage in self‐directed learning, a predecessor to intentional change theory. The individuals are graduates of a part‐time MBA program and the social environment is the life sphere framework introduced with this study. Self‐directed learning refers to the learning agendas that these people outlined for themselves when they first entered the MBA program.

Longitudinal assessment data were collected using the critical incident interview, the learning skills profile, and the life sphere interview. Correlations were run testing the hypotheses: as the number of life spheres, relationships, or activities increases, so will the demonstration of the targeted competencies; and if the participant is able to work on developing these competencies in the life sphere that he or she designates as primary to the learning goal, then the demonstration of these competencies will improve.

The number of life spheres, relationships, and activities does impact positively on the demonstration of these competencies and those participants for whom the work organization life sphere is primary to learning goal achievement showed improved demonstration of the targeted competencies.

The study needs to be replicated with a larger sample size. This initial study was merely exploratory in nature.

As society approaches the virtual office it makes sense that it will get what it needs, when it needs it – no matter where one is or to whom one is talking. With these changes has come the need to find resources in places and from people that may not have been considered previously. The relationships and activities in one's social environment are more critical than ever before.