Search results

The purpose of this study is to improve the control performance of wind energy conversion systems (WECSs) by proposing a new sensorless, robust control strategy based on a Smith predictor active disturbance rejection control (SP-ADRC) associated with a speed/position estimator.

The estimator consists of a sliding mode observer (SMO) in combination with a phase-locked loop (PLL) to estimate the permanent magnet synchronous generator (PMSG) rotor position and speed. At the same time, the SP-ADRC is applied to the speed control loop of the variable-speed WECS control system to adapt strongly to dynamic characteristics under parameter uncertainties and disturbances.

Numerical simulations are conducted to evaluate the speed tracking performances under various wind speed profiles. The results show that the proposed sensorless speed control improves the accuracy of rotor speed and position estimation and provides better power tracking performance than a regular ADRC controller under fast wind speed variations.

This paper offers a new approach for designing sensorless, robust control for PMSG-based WECSs.

A new sensorless, robust control is proposed to improve the stability and tracking performance of PMSG-based WECSs. The SP-ADRC control attenuates the effects of parameter uncertainties and disturbances and eliminates the time-delay impact. The sensorless control design based on SMO and PLL improves the accuracy of rotor speed estimation and reduces the chattering problem of traditional SMO. The obtained results support the theoretical findings.

This paper aims to present a sliding mode control method based on disturbance observer (DO) for improving the reaching law of permanent magnet synchronous motor (PMSM).

Aiming at the insufficiency of the traditional exponential reaching law used in sliding mode variable structure control, an exponential reaching law related to the speed error is proposed. The improved exponential reaching law can adaptively adjust the size of the constant velocity term in the reaching law according to the size of the speed error, so as to adaptively adjust the speed of the system approaching the sliding mode surface to overcome the control deviation and improve the dynamic and steady state performance. To improve the anti-interference ability of the system, a DO is proposed to observe the external disturbance of the system, and the observed value is used to compensate the system. The stability of the system is analyzed by Lyapunov theorem. The effectiveness of this method is proved by simulation and experiment.

Simulation and experiment show that the proposed method has the advantages of fast response and strong anti-interference ability.

The proposed method cannot observe the disturbance caused by the change of internal parameters of the system.

A sliding mode control method for PMSM is proposed, which has good control performance. The proposed method can effectively suppress chattering, ensure fast response speed and have strong anti-interference ability. The effectiveness of the algorithm is verified by simulation and experiment.

This paper aims to present a cascaded pseudo derivative feedback (PDF) plus pseudo derivative feedback plus pseudo derivative feedforward (PDFF) controller for a permanent magnet synchronous motor (PMSM) to improve the transient response of the system.

Proportional integral (PI) plus PI controller and the proposed PDF plus PDFF controller are designed, stability analysis is performed using the extended root locus method, and the effect of the damping coefficient is also extensively studied to validate the robustness of the proposed controller.

When compared to a cascaded PI plus PI controller, the proposed control approach has a much shorter settling time for the entire system and a 50% reduction in overshoot in stator current under extensive variations in speed with load disturbance.

The proposed controller is programmed into an FPGA Altera Cyclone II and applied to a 1.5 kW laboratory prototype PMSM drive. The effectiveness of the proposed methods has been demonstrated experimentally throughout a wide variable speed range, from 0 to 157 rad/s at different load conditions.

In this paper, a new front end converter (FEC) topology has been proposed for the switched reluctance (SR) motor drive. This study aims to present the performance analysis of FEC-based SR motor drive using various types of control schemes like conventional proportional integral (PI) controller, fuzzy logic controller (FLC) and fuzzy-tuned proportional integral controller (Fuzzy-PI).

The proposed FEC-based SR motor drive with various control strategies is derived for the torque ripple minimization and speed control.

The steady state and the dynamic response of the FEC-based SR motor drive are analyzed using three different controllers under change in speed and loading conditions. The Fuzzy-PI-based control scheme improves the dynamic response of the system when compared with the FLC and the conventional PI controller.

The hardware prototype has been implemented for the FEC-based SR motor drive by using the Xilinx SPARTAN 6 FPGA processor. The experimental verification has been conducted and the results have been measured under steady state and dynamic conditions.

The wind turbine (WT) is a complex system subjected to wind disturbances. Because the aerodynamics is nonlinear, the control is thus challenging. For the variation of wind speed when rated power is delivered at rated wind speed, the power is limited to the rate by the pitching of the blades of the turbine. This paper aims to address pitch control with the WT benchmark model. The possible use of appropriate adaptive controller design that modifies the control action automatically identifying any change in system parameters is explored.

To deal with pitch control problem when wind speed exceeds the rated wind speed of the WT, six digital self-tuning controller (STC) with different structures such as proportional integral (PI), proportional derivative (PD), Dahlin’s, pole placement, deadbeat and Takahashi has been taken herein. The system model is identified as a second-order autoregressive exogenous (ARX) model by three techniques for comparison: recursive least square method (RLS), RLS with exponential forgetting and RLS with adaptive directional forgetting identification methods. A comparative study of three identification methods, six adaptive controllers with the conventional PI controller and sliding mode controller (SMC), are shown.

As per the results, the best improvement in control of the output power by pitching in full load region of benchmark model is achieved by self-tuning PD controller based on RLS with adaptive directional forgetting method. The adaptive control design has a future in WT control applications.

A comparative study of identification methods, six adaptive controllers with the conventional PI controller and SMC, are shown here. As per the results, the best improvement in control of the output power by pitching in the full load region of the benchmark model has been achieved by self-tuning PD controller. The best identification method or the system is RLS with an adaptive directional forgetting method. Instead of a step input response design for the controllers, the controller design has been carried out for the stochastic wind and the performance is adjudged by the normalized sum of square tracking error (NSSE) index. The validation of the proposed self-tuning PD controller has been shown in comparison to the conventional controller with Monte-Carlo analysis to handle model parameter alteration and erroneous measurement issues.

This research aims to present a novel cooperative control architecture designed specifically for roads with variations in height and curvature. The primary objective is to enhance the longitudinal and lateral tracking accuracy of the vehicle.

In addressing the challenges posed by time-varying road information and vehicle dynamics parameters, a combination of model predictive control (MPC) and active disturbance rejection control (ADRC) is employed in this study. A coupled controller based on the authors’ model was developed by utilizing the capabilities of MPC and ADRC. Emphasis is placed on the ramifications of road undulations and changes in curvature concerning control effectiveness. Recognizing these factors as disturbances, measures are taken to offset their influences within the system. Load transfer due to variations in road parameters has been considered and integrated into the design of the authors’ synergistic architecture.

The framework's efficacy is validated through hardware-in-the-loop simulation. Experimental results show that the integrated controller is more robust than conventional MPC and PID controllers. Consequently, the integrated controller improves the vehicle's driving stability and safety.

The proposed coupled control strategy notably enhances vehicle stability and reduces slip concerns. A tailored model is introduced integrating a control strategy based on MPC and ADRC which takes into account vertical and longitudinal force variations and allowing it to effectively cope with complex scenarios and multifaceted constraints problems.

The intelligent Central Traffic Control (CTC) system plays a vital role in establishing an intelligent high-speed railway (HSR) system. As the core of HSR transportation command, the intelligent CTC system is a new HSR dispatching command system that integrates the widely used CTC in China with the practical service requirements of intelligent dispatching. This paper aims to propose key technologies and applications for intelligent dispatching command in HSR in China.

This paper first briefly introduces the functions and configuration of the intelligent CTC system. Some new servers, terminals and interfaces are introduced, which are plan adjustment server/terminal, interface for automatic train operation (ATO), interface for Dynamic Monitoring System of Train Control Equipment (DMS), interface for Power Supervisory Control and Data Acquisition (PSCADA), interface for Disaster Monitoring, etc.

The key technologies applied in the intelligent CTC system include automatic adjustment of train operation plans, safety control of train routes and commands, traffic information data platform, integrated simulation of traffic dispatching and ATO function. These technologies have been applied in the Beijing-Zhangjiakou HSR, which commenced operations at the end of 2019. Implementing these key intelligent functions has improved the train dispatching command capacity, ensured the safe operation of intelligent HSR, reduced the labor intensity of dispatching operators and enhanced the intelligence level of China's dispatching system.

This paper provides further challenges and research directions for the intelligent dispatching command of HSR. To achieve the objectives, new measures need to be conducted, including the development of advanced technologies for intelligent dispatching command, coping with new requirements with the development of China's railway signaling system, the integration of traffic dispatching and train control and the application of AI and data-driven modeling and methods.

The purpose of this study is to analyze direct current (DC) drive stability, including parameter uncertainty and perturbation in the feedback loop, by computing disk margins.

Although the closed-loop stability analysis of a DC drive has been presented well in the referenced papers, the effect of parameter uncertainty and perturbation in the feedback loop has not yet been discussed well. In this study, the conventional and disk-based stability margins were measured and compared for the nominal parameters of the DC drive. Subsequently, the smallest disk-based margins that destabilize the feedback loop for a given perturbation are computed and compared with normal disk margins.

The disk-based margin offered by the DC drive controlled by the JAYA-PID controller is disk gain margins (DGM) = 8.41 dB and disk phase margin (DPM) = 48.410 and the smallest disk-based margin offered is DGM = 1.51 dB and DPM = 9.950. In addition, the effect of the modeled uncertainty on the disk stability margins was analyzed, and it was observed that the maximum allowable parameter uncertainty with the JAYA controller was 73% of its nominal parameters. The simulation results were validated using an experimental testbed.

This research work is not published anywhere else.

The purpose of this study is to explore the use of smartphone-embedded microelectro-mechanical sensors (MEMS) for accurately estimating rotating machinery speed, crucial for various condition monitoring tasks. Rotating machinery (RM) serves a crucial role in diverse applications, necessitating accurate speed estimation essential for condition monitoring (CM) tasks such as vibration analysis, efficiency evaluation and predictive assessment.

This research explores the utilization of MEMS embedded in smartphones to economically estimate RM speed. A series of experiments were conducted across three test setups, comparing smartphone-based speed estimation to traditional methods. Rigorous testing spanned various dimensions, including scenarios of limited data availability, diverse speed applications and different smartphone placements on RM surfaces.

The methodology demonstrated exceptional performance across low and high-speed contexts. Smartphones-MEMS accurately estimated speed regardless of their placement on surfaces like metal and fiber, presenting promising outcomes with a mere 6 RPM maximum error. Statistical analysis, using a two-sample t-test, compared smartphone-derived speed outcomes with those from a tachometer and high-quality (HQ) data acquisition system.

The research limitations include the need for further investigation into smartphone sensor calibration and accuracy in extremely high-speed scenarios. Future research could focus on refining these aspects.

The societal impact is substantial, offering cost-effective CM across various industries and encouraging further exploration of MEMS-based vibration monitoring.

This research showcases an innovative approach using smartphone-embedded MEMS for RM speed estimation. The study’s multidimensional testing highlights its originality in addressing scenarios with limited data and varied speed applications.

This paper aims to propose a novel system design and control algorithm of lower limb exoskeleton, which provides walking assistance and load sharing for the wearer.

In this paper, the valve-controlled asymmetrical hydraulic cylinder is selected for driving the hip and knee joint of exoskeleton. Pressure shoe is developed that purpose on detecting changes in plantar force, and a fuzzy recognition algorithm using plantar pressure is proposed. Dynamic model of the exoskeleton is established, and the sliding mode control is developed to implement the position tracking of exoskeleton. A series of prototype experiments including benchtop test, full assistance, partial assistance and loaded walking experiments are set up to verify the tracking performance and power-assisted effect of the proposed exoskeleton.

The control performance of PID control and sliding mode control are compared. The experimental data shows the tracking trajectories and tracking errors of sliding mode control and demonstrate its good robustness to nonlinearities. sEMG of the gastrocnemius muscle tends to be significantly weakened during assisted walking.

In this paper, a structure that the knee joint and hip joint driven by the valve-controlled asymmetrical cylinder is used to provide walking assistance for the wearer. The sliding mode control is proposed to deal with the nonlinearities during joint rotation and fluids. It shows great robustness and frequency adaptability through experiments under different motion frequencies and assistance modes. The design and control method of exoskeleton is a good attempt, which takes positive impacts on the productivity or quality of the life of wearers.