Search results

Purpose – In this research, we have prepared activated carbon (AC) from the waste of banana peels (Musa acuminate L.) using potassium hydroxide (KOH) for carbon monoxide (CO) adsorption from motorcycle gas emission.

Design/Methodology/Approach – The activation was conducted using a chemical activator (KOH) at various concentrations of 1, 2, and 3 N for 1, 2, and 3 h, respectively. Characteristics of banana peels AC (BPAC) produced were analyzed using the Fourier-transform infra-red spectroscopy and scanning electron microscopy.

Findings – Results showed that KOH concentration and activation time strongly affected the CO adsorption and opening of the AC surface pore. There was an increase in the CO sorption when the KOH concentration was increased up to 3 N concentration. The highest CO adsorption from the emission occurred at 70.95% under KOH concentration of 3 N during the 3-h preparation.

Research Limitations/Implications – BPAC has been used as an adsorbent for only CO from motorcycle gas emission but not as an adsorbent for HC, NO, NO_x, or H₂S.

Practical Implications – BPAC can be used as the potential adsorbent for the removal of CO from motorcycle gas emission, and it is an environmental friendly, low cost, and easy to make adsorbent.

Originality/Value – In this study, the AC is made from biomass and is used in wastewater treatment, but limited studies are found on the removal of CO from motorcycle gas emission.

This study has covered many types of solar-powered air-conditioning systems that may be used as an alternative to traditional electrically powered air-conditioning systems in order to reduce energy usage. Solar adsorption air cooling is a great alternative to traditional vapor compression air-conditioning. Solar adsorption has several advantages over traditional vapor-compression systems, including being a green cooling technology which uses solar energy to drive the cycle, using pure water as an eco-friendly HFC-free refrigerant, and being mechanically simple with only the magnetic valves as moving parts. Several advancements and breakthroughs have been developed in the area of solar adsorption air-conditioners during the previous decade. However, further study is required before this technology can be put into practise. As a result, this book chapter highlights current research that adds to the understanding of solar adsorption air-conditioning technologies, with a focus on practical research. These systems have the potential to become the next iteration of air-conditioning systems, with the benefit of lowering energy usage while using plentiful solar energy supplies to supply the cooling demand.

Heavy metals play a crucial role in the economic development of any nation. Industries utilizing heavy metals, consequently, emanate a large volume of metal-containing liquid effluents. Since metals are non-renewable and finite resources, their judicious and sustainable use is the key. Hazardous metal-laden water poses threat to human health and ecology. Apart from metals, these industrial effluents also consist of toxic chemicals. Conventional physical–chemical techniques are not efficient enough as it consumes energy and are, therefore, not cost effective.

It is known that biomaterials namely microorganisms, plants, and agricultural biomass have the competence to bind metals, in some cases, selectively, from aqueous medium. This phenomenon is termed as “metal biosorption.” Biosorption has immense potential of becoming an effective alternative over conventional methods. The authors in the present chapter have used secondary data from their previous research work and attempted to develop few strategic models through their feasibility studies for metal sustainability.

Purpose – The purpose of this paper to immobilization provides biosorbent particle with density and mechanichal strength, immobilization can save the cost of separating from biomass, can be regeneration and to increase adsorption capacity for metal ions.

Design/Methodology/Approach – The parameters affecting the adsorption, such as initial metal ion concentration, pH, contact time, and temperature, were studied. The analysis of biosorbent functional group was carried out by Fourier Transform Infrared Spectroscopy, SEM-EDX, for elemental analysis.

Findings – Optimum pH condition for biosorption Cd(II) was pH 5, contact time was 45 min, and initial concentration was 250 mg/L. Biosorbent analysis was characterized using SEM-EDX and FTIR analysis. Kinetics adsorption was studied and analyzed in terms of the pseudo-first-order, pseudo-second-order, and intraparticle diffusion kinetics models. The result showed that the biosorption for Cd(II) ion followed the pseudo-second-order kinetic model. Biosorption data of Cd(II) ion at 300°K, 308°K, and 318°K was analyzed with Temkin, Langmuir, and Freundlich isotherms. Biosorption of Cd(II) by durian seed immobilization in alginate according to the Langmuir isotherm equation provided a coefficient correlation of r² = 0.939 and maximum capacity biosorption of 25.05 mg/g.

Cleats are considered one of the significant permeability-related parameters in coalbed methane (CBM) growth. As critical parameters for CBM extraction, a complete characterisation of cleat distributions and orientation can provide a better tool to indirectly estimate porosity and permeability in coal reservoirs. This chapter presents the outcomes of the production of comprehensive research cleats within Miocene coal seams as part of CBM exploration and development. The majority of data (cross-section view measurement) were collected on mine’s walls. Cleat data were gathered from 16 windows measurement locations with hundreds of cleats were measured from outcrops for several coal seams. Two primary cleat orientations; for face cleats, NNE-SSW and for butt cleats, ESE-WNW. The ratio of low permeability coals appears to have a smaller cleat aperture than high permeability coals. As critical parameters for CBM extraction, a complete characterisation of cleat distributions and orientation can provide a better tool to indirectly estimate porosity and permeability in coal reservoirs.

Although there have been extensive studies on the hydrological and erosional impacts of logging, relatively little is known about the impacts of conversion into agricultural plantation (namely rubber and oil palm). Furthermore, studies on morphological impacts, sediment-bound chemistry and forensic attribution of deposited sediment to their respective sources are scarcer. This chapter introduces the potential for using the multi-proxy sediment fingerprinting technique in this context. Featuring pilot projects in two major flood-prone river systems in Malaysia, the studies explore application of geochemistry-based sediment source ascription. The geochemical signatures of sediment mixtures on floodplains were compared to sediments from upstream source tributaries. The tributaries were hypothesised to have different geochemical signatures in response to dominant land management. The first case study took place in the Segama River system (4,023 km²) of Sabah, Malaysian Borneo where a mixture of primary forest, logged-forests and oil palm plantations were predominant. The second case study was in the Kelantan River Basin (13,100 km²) with two major tributaries (Galas River and Lebir River) where logged-forests and rubber and oil palm plantations are dominant land-uses. Both case studies demonstrated the applicability of this method in ascribing floodplain deposited sediment to their respective upstream sources. Preliminary results showed that trace elements associated with fertilisers (e.g. copper and vanadium) contribute to agricultural catchment signatures. Alkaline and alkaline-earth elements were linked to recently established oil palm plantations due to soil turnover. Mixing model outputs showed that contributions from smaller, more severely disturbed catchment are higher than those from larger but milder disturbed catchments. This method capitalises on flood events to counter its adverse impacts by identifying high-priority sediment source areas for efficient and effective management.

Air pollution is the combination of fine particles and gases in the atmosphere that harm humans and animals. Our objective is to find the various air pollution contaminants and its repercussion on Homo sapiens’ health. We discuss how air quality is measured with the air quality index and measures that help us cope with the consequences of air pollution. To carry out this study, we carried out a systematic literature review to uncover the different dimensions of air pollution and mitigation strategies. From the existing literature and observations of the different data sets, we can conclude that air pollutants have a severe impact on the life of Homo sapiens, causing various diseases such as respiratory issues, skin diseases, etc. Today, we have ample laws, but the need of the hour is to initiate new policies to change the behavioural of Homo sapiens. Our findings will help in decision-making by stakeholders such as policy-makers, manufacturing industries, households, etc. This article will also help in highlighting the need for Homo sapiens behavioural change.

Nuclear energy is of vital importance for the energy independence of countries. Therefore, some of the countries have given priority to nuclear energy investments. However, there are some risks in nuclear reactors. For this reason, some countries are uneasy about nuclear energy investments. Thorium-based nuclear power plants are also recommended to minimize these risks. It is possible to talk about many advantages of these power plants. However, there are some negative aspects to these investments. In this study, both positive and negative aspects of thorium-based nuclear power plants are discussed simultaneously. In this context, first, the literature was comprehensively examined, and seven different factors were determined. An analysis is then carried out using the DEMATEL method. It is concluded that the cost and uncertainties have the greatest weight. In addition, suitability and physical and chemical reasons are other significant items. The results obtained show that thorium-based nuclear power plants are not very efficient now. In this context, the costs of thorium-based nuclear reactors should be reduced by new research and development activities. Otherwise, the high-cost problem reduces the efficiency of these reactors. With the developing technology, it is necessary to reduce the high costs. If the costs cannot be reduced, financial sustainability of thorium-based nuclear reactors will not be possible, although there are many benefits.