Search results

Photovoltaic (PV) systems are experiencing exponential growth due to environmental concerns, unlimited and ubiquitous solar energy, and starting-to-make-sense panel costs. Alongside designing more efficient solar panels, installing solar trackers and special circuitry for optimizing power delivery to the load according to a maximum power point tracking (MPPT) algorithm are other ways of increasing efficiency. However, it is critical for any efficiency increase to account for the power consumption of any amendments. Therefore, this paper aims to propose a novel tracker while using MPPT to boost the PV system's actual efficiency accounting for the involved costs.

The proposition is an experimental pneumatic dual-axis solar tracker using light-dependent resistor (LDR) sensors. Due to its embedded energy storage, the pneumatic tracker offers a low duty-cycle operation leading to tracking energy conservation, fewer maintenance needs and scalability potential. While MPPT assures maximum load power delivery, the solar PV's actual delivered power is calculated for the first time, accounting for the solar tracking and MPPT power costs.

The experiments' results show an increase of 37.6% in total and 35.3% in actual power production for the proposed solar tracking system compared to the fixed panel system, with an MPPT efficiency of 90%. Thus, the pneumatic tracking system offers low tracking-energy consumption and good actual power efficiency. Also, the newly proposed pneumatic stimulant can significantly simplify the tracking mechanism and benefit from several advantages that come along with it.

To the best of the authors’ knowledge, this work proposes, for the first time, a single-motor pneumatic dual-axis tracker with less implementation cost, less frequent operation switching and scalability potential, to be developed in future works. Also, the pneumatic proposal delivers high actual power efficiency for the first time to be addressed.

This study aims to improve the automatic leveling performance of tractor body in hilly and mountainous areas by designing a kind of controllable and adaptive leveling mechanism of tractor body.

The mechanism is mainly composed of longitudinal slope leveling mechanism, transverse slope leveling mechanism and control components. According to the tractor body attitude in operation, the longitudinal slope leveling and lateral slope leveling can coordinate to realize the adaptive adjustment of tractor body. For this mechanism, the support mode of the linear three-point support and plane positioning combining is designed, and the leveling method of electromechanical combination is designed. The servo motor controls the longitudinal slope leveling mechanism through the reducer with self-locking function to realize the longitudinal leveling, and the servo driver controls the expansion and contraction of electric cylinder to realize lateral leveling. The designed mode can realize the relative independence and coordination of leveling in different directions.

The performance test results of the leveling mechanism are shown: the mechanism can work normally; the leveling accuracy can reach within 1°; and the leveling accuracy and stability can meet the design requirements. The leveling accuracy and stability of longitudinal slope are higher than that of lateral slope, and the coordination leveling effect of longitudinal slope and lateral slope is better than that of the independent leveling.

This study provides a technical reference for the design of leveling device of agricultural machines and tools in hilly and mountainous areas.

Microribbon with meander type based on giant magnetoimpedance (GMI) effect has become a research hot spot due to their higher sensitivity and spatial resolution. The purpose of this paper is to further optimize the line spacing to improve the performance of meanders for sensor application.

The model of GMI effect of microribbon with meander type is established. The effect of line spacing (Ls) on GMI behavior in meanders is analyzed systematically.

Comparison of theory and experiment indicates that decreasing the line spacing increases the negative mutual inductance and a consequent increase in the GMI effect. The maximum value of the GMI ratio increases from 69% to 91.8% (simulation results) and 16.9% to 51.4% (experimental results) when the line spacing is reduced from 400 to 50 µm. The contribution of line spacing versus line width to the GMI ratio of microribbon with meander type was contrasted. This behavior of the GMI ratio is dominated by the overall negative contribution of the mutual inductance.

This paper explores the effect of line spacing on the GMI ratio of meander type by comparing the simulation results with the experimental results. The superior line spacing is found in the identical sensing area. The findings will contribute to the design of high-performance micropatterned ribbon with meander-type GMI sensors and the establishment of a ribbon-based magnetic-sensitive biosensing system.

This research paper aims to develop and validate an enhanced business process improvement methodology (EBPIM) by integrating the DMAIC (define, measure, analyze, improve and control) and the comprehensive business process management (CBPM) methodologies.

A systematic literature review and analysis were conducted to prove the novelty of the research approach and identify the similarities, differences, strengths and weaknesses of the DMAIC and the CBPM methodologies. The EBPIM was proposed based on the analysis results. Then, a focus group approach was used to evaluate and validate the methodology.

The EBPIM consists of nine activities: preparation, selection, description, quantification, modeling, enactment, improvement opportunities selection, analysis and improvement and monitoring. The proposed methodology adopted the systematic and structured process of the DMAIC methodology by having one tollgate between every two activities to check the progress and authorize the team to go to the next activity. At the same time, it has the ability of the CBPM methodology to enhance the interaction between human activities and business process management systems (BPMS).

The EBPIM was evaluated and validated by a focus group of academic professors. However, the main limitation of the proposed methodology is that it is still theoretical and needs to be empirically tested. Therefore, future work will focus on testing the EBPIM in different industries and organization sizes.

From the theoretical perspective, the proposed methodology adds value to the knowledge in the scope of business processes improvement methodologies (BPIMs) by integrating the DMAIC and the CBPM methodologies. It takes advantage of and combines the strengths of the DMAIC and CBPM methodologies. From the practical perspective, the proposed methodology presents a valuable tool that can facilitate the organization’s mission to improve the areas that need improvement using a systematic improvement methodology that will effectively enhance organizational performance (OP).

The BPIMs literature analysis proved that most of the reviewed methodologies could not support all phases of the business process improvement (BPI) activities. It was concluded that integrating the DMAIC and the CBPM methodologies is a novel approach. The proposed methodology will enhance the efficiency of both methodologies, fill the gaps that may exist in both of them and lead to better results in terms of BPI.

In a packaging olives manufacturing system, the drained weight of the product plays a decisive role in customer’s satisfaction as well as in financial saving for the organization. The purpose of this study is to minimize the variation of the drained weight of olives in the production system to avoid the negative consequences.

The research develops a practical implementation step-by-step of Six Sigma define, measure, analyze, improve and control (DMAIC) in reducing the variation of the drained weight of olives.

Data analysis was used at various phases of the project to identify the root causes of rejection and rework. As a result of the necessary interventions and actions to optimize the manufacturing process, the standard deviation of drained weight was significantly reduced by 51.02%, with a 99.97% decrease in the number of parts per million defectives. Thus, the yield of the production process was improved by 8.24%. The estimated annual savings from this project were US$ 228,000 resulting from reduced rejection and rework.

This research may be used in packaging olives production systems as a tool for managers and engineers planning to increase productivity and efficiency while also improving product quality. The study also provided the organization with helpful actions that will be used to guide future Six Sigma operations management on the system. Thus, practical guidelines and solutions are provided.

In this project, for the first time, the Six Sigma methodology has been applied to solve a real-world problem in the packaging olives manufacturing system and to show that the DMAIC approach may assist to improve the efficiency of their operations and hence contribute to their quest toward continuous improvement.