Search results

Electric motor heating during biomass recovery and its handling on conveyor is a serious concern for the motor performance. Thus, the purpose of this paper is to design and develop a hardware prototype of master–slave electric motors based biomass conveyor system to use the motors under normal operating conditions without overheating.

The hardware prototype of the system used master–slave electric motors for embedded controller operated robotic arm to automatically replace conveyor motors by one another. A mixed signal based embedded controller (C8051F226DK), fully compliant with IEEE 1149.1 specifications, was used to operate the entire system. A precise temperature measurement of motor with the help of negative temperature coefficient sensor was possible due to the utilization of industry standard temperature controller (N76E003AT20). Also, a pulse width modulation based speed control was achieved for master–slave motors of biomass conveyor.

As compared to conventional energy based mains supply, the system is self-sufficient to extract more energy from solar supply with an energy increase of 11.38%. With respect to conventional energy based \ of 47.31%, solar energy based higher energy saving of 52.69% was reported. Also, the work achieved higher temperature reduction of 34.26% of the motor as compared to previous cooling options.

The proposed technique is free from air, liquid and phase-changing material based cooling materials. As a consequence, the work prevents the wastage of these materials and does not cause the risk of health hazards. Also, the motors are used with their original dimensions without facing any leakage problems.

This study aims to study the thermal identification issue by harvesting both solar energy and atmospheric thermal updraft for a solar-powered unmanned aerial vehicle (SUAV) and its electric energy performance under continuous soaring conditions.

The authors develop a specific dynamic model for SUAVs in both soaring and cruise modes. The support vector machine regression (SVMR) is adopted to estimate the thermal position, and it is combined with feedback control to implement the SUAV soaring in the updraft. Then, the optimal path model is built based on the graph theory considering the existence of several thermals distributed in the environment. The procedure is proposed to estimate the electricity cost of SUAV during flight as well as soaring, and making use of dynamic programming to maximize electric energy.

The simulation results present the integrated control method could allow SUAV to soar with the updraft. In addition, the proposed approach allows the SUAV to fly to the destination using distributed thermals while reducing the electric energy use.

Two simplified dynamic models are constructed for simulation considering there are different flight mode. Besides, the data-driven-based SVMR method is proposed to support SUAV soaring. Furthermore, instead of using length, the energy cost coefficient in optimization problem is set as electric power, which is more suitable for SUAV because its advantage is to transfer the three-dimensional path planning problem into the two-dimensional.

This study aims to provide an alternative adoption to overcome the energy crisis and environmental effluence by comparative theoretical and trial testing analysis of an innovative combined condenser unit over traditional individual condenser unit water heating systems.

The presented innovative new unit of the combined condenser heat pipe works efficiently through its improved idea and unique design, providing uniform heating to improve the heat transfer and, finally, the temperature of water increases without enhancing the cost. In this design, all these five evaporator units were connected with a single combined condenser unit in such a manner that after the condensation of heat transfer fluid vapour, it goes equally into the evaporator pipe.

The maximum temperature of hot water obtained from the combined condenser heating system was 60.6, 55.5 and 50.3°C at a water flow rate of 0.001, 0.002 and 0.003 kg/s, respectively. The first and second law thermodynamic efficiency of the combined condenser heating system were 55.4%, 60.5% and 89.0% and 2.6%, 3.7% and 4.1% at 0.001, 0.002 and 0.003 kg/s of water flow rates, respectively. The combined condenser heat pipe solar evacuated tube heating system promoting progressive performance is considered efficient and environment-friendly compared to the traditional condenser unit water heating system.

Innovative combined condenser heat pipe evacuated tube collector assembly was designed and developed for the study. A comparative theoretical and experimental energy-exergy performance analysis was performed of innovated collective condenser and traditional individual condenser heat pipe water heating system at various mass flow rate.

This study aims to explore the use of knowledge sharing (KS) in delivering open social innovation (OSI) solutions for sustainable development in the context of economically marginalized, rural societies in India.

The study is guided by an exploratory, qualitative approach using an embedded case study design with four social enterprises. The study approaches the use of KS in three stages of OSI: (1) the stages of ideating and prototyping, (2) the initial stages of experimenting and business development and (3) the more current and future-oriented stages of organizations’ strategies for expanding market opportunities for maximizing impact.

The first stage used KS for collaborative efforts among diverse stakeholders to recognize the needs of marginalized people and ideate suitable ecological solutions. The social enterprises acted as orchestrators in this stage. The second stage involved a more dynamic role of KS in the refinement of social enterprises’ market offerings, generating additional innovations and value propositions, which diversified the scope of the social enterprises. This was facilitated by enterprises’ ability to be open systems, which change and evolve through OSI processes and KS. In the third stage, social enterprises’ use of KS was shifted towards future business development by expanding market opportunities with solutions that tackle complex societal and ecological problems, thereby contributing to sustainable development goals.

The present study contributes to studies on OSI, focusing on sustainable development and the role played by social enterprises operating in rural, economically marginalized areas, which have been an understudied phenomenon in the open innovation literature.

Jubail Industrial City is one of the largest industrial centers in the Middle East, offering potential opportunities for renewable energy generation. This research paper presents a comprehensive analysis of the wind resources in Jubail Industrial City and proposes the design of a smart grid-connected wind farm for this strategic location.

The study used wind data collected at three different heights above ground level – 10, 50 and 90 m – over four years from 2017 to 2020. Key parameters, such as average wind speeds (WS), predominant wind direction, Weibull shape, scale parameters and wind power density (WPD), were analyzed. The study used Windographer, an exclusive software program designed to evaluate wind resources.

The average WS at the respective heights were 3.07, 4.29 and 4.58 m/s. The predominant wind direction was from the north-west. The Weibull shape parameter (k) at the three heights was 1.77, 2.15 and 2.01, while the scale parameter (c) was 3.36, 4.88 and 5.33 m/s. The WPD values at different heights were 17.9, 48.8 and 59.3 W/m², respectively.

The findings suggest that Jubail Industrial City possesses favorable wind resources for wind energy generation. The proposed smart grid-connected wind farm design demonstrates the feasibility of harnessing wind power in the region, contributing to sustainable energy production and economic benefits.

This study aims to investigate the daily performance of the proposed microgrid (MG) that comprises photovoltaic, wind turbines and is connected to the main grid. The load demand is a residential area that includes 20 houses.

The daily operational strategy of the proposed MG allows to vend and procure utterly between the main grid and MG. The smart metre of every consumer provides the supplier with the daily consumption pattern which is amended by demand side management (DSM). The daily operational cost (DOC) CO2 emission and other measures are utilized to evaluate the system performance. A grey wolf optimizer was employed to minimize DOC including the cost of procuring energy from the main grid, the emission cost and the revenue of sold energy to the main grid.

The obtained results of winter and summer days revealed that DSM significantly improved the system performance from the economic and environmental perspectives. With DSM, DOC on winter day was −26.93 ($/kWh) and on summer day, DOC was 10.59 ($/kWh). While without considering DSM, DOC on winter day was −25.42 ($/kWh) and on summer day DOC was 14.95 ($/kWh).

As opposed to previous research that predominantly addressed the long-term operation, the value of the proposed research is to investigate the short-term operation (24-hour) of MG that copes with vital contingencies associated with selling and procuring energy with the main grid considering the environmental cost. Outstandingly, the proposed research engaged the consumers by smart meters to apply demand-sideDSM, while the previous studies largely focused on supply side management.

This empirical research intends to examine factors influencing the adoption of renewable energy (RE) using a conceptual model of the consumer decision-making process.

This study uses a primary response-based survey to collect data from 668 respondents interested in adopting RE for their daily usage. The sample respondents were chosen through a multi-stage random stratified technique. The responses were analyzed through structural equation-based modeling techniques to discuss the findings and suggest further implications.

The findings suggest that factors like knowledge, policy incentives, sustainable development goals (SDGs-7, 11 and 13), socio-economic benefits and risk perception significantly impact the adoption of RE. Besides, risk perception mediates between environmental concerns and the adoption of RE. Also, age has a significant role in RE adoption.

The study finds the critical role of government in introducing financial incentives to reduce the initial cost of renewable adoption. Doing so will also promote clean and equitable energy access to society leading to further fulfillment of SDGs. Additionally, steps like knowledge enrichment, designing suitable policies for a manufacturer and public-friendly renewable market development will further facilitate renewable adoption in society.

With an objective to study the public perception and attitude towards renewable adoption, this empirical research is the first of its kind to carry out a real-time survey of the Indian population and suggest policy implications which would benefit all the concerned stakeholders.

In an era where sustainability and digital transformation are becoming indispensable pillars of successful business operations, this chapter explores the potent synergy between these two paradigms. As businesses strive to align their operations with Environmental, Social, and Governance (ESG) goals, digital transformation emerges as a powerful enabler. This chapter delves into how digital technologies are not only revolutionizing traditional business models but are also paving the way toward more sustainable practices. From data-driven decision-making to improved resource management, this chapter discusses the diverse ways in which digital transformation contributes to sustainability. It also offers an in-depth analysis of real-world case studies, illustrating how businesses have successfully integrated digital transformation in their pursuit of sustainability. Recognizing the potential roadblocks, this chapter also addresses the challenges businesses may face in this journey, including cybersecurity risks, data privacy issues, and the need for technological literacy. It further presents strategies to navigate these challenges and underscores the importance of preparedness in managing potential risks. Finally, this chapter ventures into the future of digital transformation, evaluating current trends and predictions, and their potential impact on sustainable business practices.