Search results

The article aims to establish whether the degree of aversion to inflation and the responsiveness to deviations from potential output have changed over time.

This paper assesses time variation in monetary policy rules by applying a time-varying parameter generalised methods of moments (TVP-GMM) framework.

Using monthly data until December 2022 for five inflation targeting countries (the UK, Canada, Australia, New Zealand, Sweden) and five countries with alternative monetary regimes (the US, Japan, Denmark, the Euro Area, Switzerland), we find that monetary policy has become more averse to inflation and more responsive to the output gap in both sets of countries over time. In particular, there has been a clear shift in inflation targeting countries towards a more hawkish stance on inflation since the adoption of this regime and a greater response to both inflation and the output gap in most countries after the global financial crisis, which indicates a stronger reliance on monetary rules to stabilise the economy in recent years. It also appears that inflation targeting countries pay greater attention to the exchange rate pass-through channel when setting interest rates. Finally, monetary surprises do not seem to be an important determinant of the evolution over time of the Taylor rule parameters, which suggests a high degree of monetary policy transparency in the countries under examination.

It provides new evidence on changes over time in monetary policy rules.

This study aims to develop the alleviating bullwhip effects framework (ABEF) replenishment rules, and bullwhip, inventory fluctuations and customer service fulfilment rates were examined. In addition, automated smoothing and replenishment rules can alleviate supply chain bullwhip effects. This study aims to understand the current artificial intelligence (AI) implementation practice in alleviating bullwhip effects in supply chain management. This study aimed to develop a system for writing reviews using a systematic approach.

The methodology for the present study consists of three parts: Part 1 deals with the systematic review process. In Part 2, the study applies social network analysis (SNA) to the fourth phase of the systematic review process. In Part 3, the author discusses developing research clusters to analyse the research state more granularly. Systematic literature reviews synthesize scientific evidence through repeatable, transparent and rigorous procedures. By using this approach, you can better interpret and understand the data. The author used two databases (EBSCO and World of Science) for unbiased analysis. In addition, systematic reviews follow preferred reporting items for systematic reviews and meta-analyses.

The study uses UCINET6 software to analyse the data. The study found that specific topics received high centrality (more attention) from scholars when it came to the study topic. Contrary to this, others experienced low centrality scores when using NETDRAW visualization graphs and dynamic capability clusters. Comprehensive analyses are used for the study’s comparison of clusters.

This study used a journal publication as the only source of information. Peer-reviewed journal papers were eliminated for their lack of rigorousness in evaluating the state of practice. This paper discusses the bullwhip effect of digital technology on supply chain management. Considering the increasing use of “AI” in their publications, other publications dealing with sensor integration could also have been excluded. To discuss the top five and bottom five topics, the author used magazines and tables.

The study explores the practical implications of smoothing the bullwhip effect through AI systems, collaboration, leadership and digital skills. Artificial intelligence is rapidly becoming a preferred tool in the supply chain, so management must understand the opportunities and challenges associated with its implementation. Furthermore, managers should consider how AI can influence supply chain collaboration concerning trust and forecasting to smooth the bullwhip effect.

Digital leadership and addressing the digital skills gap are also essential for the success of AI systems. According to the framework, it is necessary to balance AI performance and accountability. As a result of the framework and structured management approach, the author can examine the implications of AI along the supply chain.

The study uses a systematic literature review based on SNA to analyse how AI can alleviate the bullwhip effects of supply chain disruption and identify the focused and the most important AI topics related to the bullwhip phenomena. SNA uses qualitative and quantitative methodologies to identify research trends, strengths, gaps and future directions for research. Salient topics for reviewing papers were identified. Centrality metrics were used to analyse the contemporary topic’s importance, including degree, betweenness and eigenvector centrality. ABEF is presented in the study.

Reducing aircraft fuel consumption has become a paramount research area, focusing on optimizing operational parameters like speed and altitude during the cruise phase. However, the existing methods for fuel reduction often rely on complex experimental calculations and data extraction from embedded systems, making practical implementation challenging. To address this, this study aims to devise a simple and accessible approach using available information.

In this paper, a novel analytic method to estimate and optimize fuel consumption for aircraft equipped with jet engines is proposed, with a particular emphasis on speed and altitude parameters. The dynamic variations in weight caused by fuel consumption during flight are also accounted for. The derived fuel consumption equation was rigorously validated by applying it to the Boeing 737–700 and comparing the results against the fuel consumption reference tables provided in the Boeing manual. Remarkably, the equation yielded closely aligned outcomes across various altitudes studied. In the second part of this paper, a pioneering approach is introduced by leveraging the particle swarm optimization algorithm (PSO). This novel application of PSO allows us to explore the equation’s potential in finding the optimal altitude and speed for an actual flight from Algiers to Brussels.

The results demonstrate that using the main findings of this study, including the innovative equation and the application of PSO, significantly simplifies and expedites the process of determining the ideal parameters, showcasing the practical applicability of the approach.

The suggested methodology stands out for its simplicity and practicality, particularly when compared to alternative approaches, owing to the ready availability of data for utilization. Nevertheless, its applicability is limited in scenarios where zero wind effects are a prevailing factor.

The research opens up new possibilities for fuel-efficient aviation, with a particular focus on the development of a unique fuel consumption equation and the pioneering use of the PSO algorithm for optimizing flight parameters. This study’s accessible approach can pave the way for more environmentally conscious and economical flight operations.

This study aims to construct a sentiment series generation method for danmu comments based on deep learning, and explore the features of sentiment series after clustering.

This study consisted of two main parts: danmu comment sentiment series generation and clustering. In the first part, the authors proposed a sentiment classification model based on BERT fine-tuning to quantify danmu comment sentiment polarity. To smooth the sentiment series, they used methods, such as comprehensive weights. In the second part, the shaped-based distance (SBD)-K-shape method was used to cluster the actual collected data.

The filtered sentiment series or curves of the microfilms on the Bilibili website could be divided into four major categories. There is an apparently stable time interval for the first three types of sentiment curves, while the fourth type of sentiment curve shows a clear trend of fluctuation in general. In addition, it was found that “disputed points” or “highlights” are likely to appear at the beginning and the climax of films, resulting in significant changes in the sentiment curves. The clustering results show a significant difference in user participation, with the second type prevailing over others.

Their sentiment classification model based on BERT fine-tuning outperformed the traditional sentiment lexicon method, which provides a reference for using deep learning as well as transfer learning for danmu comment sentiment analysis. The BERT fine-tuning–SBD-K-shape algorithm can weaken the effect of non-regular noise and temporal phase shift of danmu text.

This study aims to enhance merging of additive manufacturing (AM) techniques with powder injection molding (PIM). In this way, the prototypes could be 3D-printed and mass production implemented using PIM. Thus, the surface properties and mechanical performance of parts produced using powder/polymer binder feedstocks [material extrusion (MEX) and PIM] were investigated and compared with powder manufacturing based on direct metal laser sintering (DMLS).

PIM parts were manufactured from 17-4PH stainless steel PIM-quality powder and powder intended for powder bed fusion compounded with a recently developed environmentally benign binder. Rheological data obtained at the relevant temperatures were used to set up the process parameters of injection molding. The tensile and yield strengths as well as the strain at break were determined for PIM sintered parts and compared to those produced using MEX and DMLS. Surface properties were evaluated through a 3D scanner and analyzed with advanced statistical tools.

Advanced statistical analyses of the surface properties showed the proximity between the surfaces created via PIM and MEX. The tensile and yield strengths, as well as the strain at break, suggested that DMLS provides sintered samples with the highest strength and ductility; however, PIM parts made from environmentally benign feedstock may successfully compete with this manufacturing route.

This study addresses the issues connected to the merging of two environmentally efficient processing routes. The literature survey included has shown that there is so far no study comparing AM and PIM techniques systematically on the fixed part shape and dimensions using advanced statistical tools to derive the proximity of the investigated processing routes.

Selective laser sintering (SLS) is an essential technology in the field of additive manufacturing. However, SLS technology is limited by the traditional point-laser sintering method and has reached the bottleneck of efficiency improvement. This study aims to develop an image-shaped laser sintering (ISLS) system based on a digital micromirror device (DMD) to address this problem. The ISLS system uses an image-shaped laser light source with a size of 16 mm × 25.6 mm instead of the traditional SLS point-laser light source.

The ISLS system achieves large-area image-shaped sintering of polymer powder materials by moving the laser light source continuously in the x-direction and updating the sintering pattern synchronously, as well as by overlapping the splicing of adjacent sintering areas in the y-direction. A low-cost composite powder suitable for the ISLS system was prepared using polyether sulfone (PES), pinewood and carbon black (CB) powders as raw materials. Large-sized samples were fabricated using composite powder, and the microstructure, dimensional accuracy, geometric deviation, density, mechanical properties and feasible feature sizes were evaluated.

The experimental results demonstrate that the ISLS system is feasible and can print large-sized parts with good dimensional accuracy, acceptable geometric deviations, specific small-scale features and certain density and mechanical properties.

This study has achieved the transition from traditional point sintering mode to image-shaped surface sintering mode. It has provided a new approach to enhance the system performance of traditional SLS.

This paper aims to compare the wear behavior, surface roughness, friction coefficient and volume loss of high-velocity oxy-fuel (HVOF) sprayed WC–Co and WC–Cr₃C₂–Ni coatings on AISI 1095 steel with spraying times of 10 and 15 s.

In this study, the pin-on-disc testing technique was used to evaluate the wear characteristics at a speed of 0.24 m/s, load of 40 N and test time of 60 min under dry conditions at room temperature. The wear characteristics were examined and analyzed by scanning electron microscopy and energy dispersive X-ray spectroscopy. The surface roughness of a coated surface was measured, and microhardness measurements were performed on the cross-sectioned and polished surfaces of the coating.

Spraying time and powder material affected the hardness of HVOF coatings due to differences in the porosity of the coated layers. The average hardness of the WC–Cr₃C₂–Ni coating with a spaying time of 15 s was approximately 14% higher than that of the WC–Cr₃C₂–Ni coating with a spraying time of 10 s. Under an applied load of 40 N, the WC–Co coating with a spraying time of 15 s had the lowest variation in the friction coefficient compared with the other coatings. The WC–Co coating with a spraying time of 10 s had the lowest average and variation in volume loss compared to the other coatings. The WC–Cr₃C₂–Ni coating with a spraying time of 10 s exhibited the highest average volume loss. The wear features changed slightly with the spraying time owing to variations in the hardness and friction coefficient.

This study investigated tribological performance of WC–Co; WC-Cr₃C₂-Ni coatings with spraying times of 10 and 15 s using pin-on-disc tribometer by rotating the relatively soft pin (C45 steel) against hard coated substrate (disc).

This paper aims to study a neural network-based fault-tolerant controller to improve the tracking control performance of an unmanned autonomous helicopter with system uncertainty, external disturbances and sensor faults, using the prescribed performance method.

To ensure that the tracking error satisfies the prescribed performance, the authors adopt an error transformation function method. A control scheme based on the neural network and high-order disturbance observer is designed to guarantee the boundedness of the closed-loop system. A simulation is performed to prove the validity of the control scheme.

The developed adaptive fault-tolerant control method makes the system with sensor fault realize tracking control. The error transformation function method can effectively handle the prescribed performance requirements. Sensor fault can be regarded as a type of system uncertainty. The uncertainty can be approximated accurately using neural networks. A high-order disturbance observer can effectively suppress compound disturbances.

The tracking performance requirements of unmanned autonomous helicopter system are considered in the design of sensor fault-tolerant control. The inequality constraint that the output tracking error must satisfy is transformed into an unconstrained problem by introducing an error transformation function. The fault state of the velocity sensor is considered as the system uncertainty, and a neural network is used to approach the total uncertainty. Neural network estimation errors and external disturbances are treated as compound disturbances, and a high-order disturbance observer is constructed to compensate for them.

Developing a reliable cost estimate at the early stage of construction projects is challenging due to inadequate project information. Most of the information during this stage is qualitative, posing additional challenges to achieving accurate cost estimates. Additionally, there is a lack of tools that use qualitative project information and forecast the budgets required for project completion. This research, therefore, aims to develop a model for setting project budgets (excluding land) during the pre-conceptual stage of residential buildings, where project information is mainly qualitative.

Due to the qualitative nature of project information at the pre-conception stage, a natural language processing model, DistilBERT (Distilled Bidirectional Encoder Representations from Transformers), was trained to predict the cost range of residential buildings at the pre-conception stage. The training and evaluation data included 63,899 building permit activity records (2021–2022) from the Victorian State Building Authority, Australia. The input data comprised the project description of each record, which included project location and basic material types (floor, frame, roofing, and external wall).

This research designed a novel tool for predicting the project budget based on preliminary project information. The model achieved 79% accuracy in classifying residential buildings into three cost_classes ($100,000-$300,000, $300,000-$500,000, $500,000-$1,200,000) and F1-scores of 0.85, 0.73, and 0.74, respectively. Additionally, the results show that the model learnt the contextual relationship between qualitative data like project location and cost.

The current model was developed using data from Victoria state in Australia; hence, it would not return relevant outcomes for other contexts. However, future studies can adopt the methods to develop similar models for their context.

This research is the first to leverage a deep learning model, DistilBERT, for cost estimation at the pre-conception stage using basic project information like location and material types. Therefore, the model would contribute to overcoming data limitations for cost estimation at the pre-conception stage. Residential building stakeholders, like clients, designers, and estimators, can use the model to forecast the project budget at the pre-conception stage to facilitate decision-making.

Electric motor heating during biomass recovery and its handling on conveyor is a serious concern for the motor performance. Thus, the purpose of this paper is to design and develop a hardware prototype of master–slave electric motors based biomass conveyor system to use the motors under normal operating conditions without overheating.

The hardware prototype of the system used master–slave electric motors for embedded controller operated robotic arm to automatically replace conveyor motors by one another. A mixed signal based embedded controller (C8051F226DK), fully compliant with IEEE 1149.1 specifications, was used to operate the entire system. A precise temperature measurement of motor with the help of negative temperature coefficient sensor was possible due to the utilization of industry standard temperature controller (N76E003AT20). Also, a pulse width modulation based speed control was achieved for master–slave motors of biomass conveyor.

As compared to conventional energy based mains supply, the system is self-sufficient to extract more energy from solar supply with an energy increase of 11.38%. With respect to conventional energy based \ of 47.31%, solar energy based higher energy saving of 52.69% was reported. Also, the work achieved higher temperature reduction of 34.26% of the motor as compared to previous cooling options.

The proposed technique is free from air, liquid and phase-changing material based cooling materials. As a consequence, the work prevents the wastage of these materials and does not cause the risk of health hazards. Also, the motors are used with their original dimensions without facing any leakage problems.