Search results

Devices for step estimation are body-worn devices used to compute steps taken and/or distance covered by the user. Even though textiles or clothing are foremost to come to mind in terms of articles meant to be worn, their prominence among devices and systems meant for cadence is overshadowed by electronic products such as accelerometers, wristbands and smart phones. Athletes and sports enthusiasts using knee sleeves should be able to track their performances and monitor workout progress without the need to carry other devices with no direct sport utility, such as wristbands and wearable accelerometers. The purpose of this study thus is to contribute to the broad area of wearable devices for cadence application by developing a cheap but effective and efficient stride measurement system based on a knee sleeve.

A textile strain sensor is designed by weft knitting silver-plated nylon yarn together with nylon DTY and covered elastic yarn using a 1 × 1 rib structure. The area occupied by the silver-plated yarn within the structure served as the strain sensor. It worked such that, upon being subjected to stress, the electrical resistance of the sensor increases and in turn, is restored when the stress is removed. The strip with the sensor is knitted separately and subsequently sewn to the knee sleeve. The knee sleeve is then connected to a custom-made signal acquisition and processing system. A volunteer was employed for a wearer trial.

Experimental results establish that the number of strides taken by the wearer can easily be correlated to the knee flexion and extension cycles of the wearer. The number of peaks computed by the signal acquisition and processing system is therefore counted to represent stride per minute. Therefore, the sensor is able to effectively count the number of strides taken by the user per minute. The coefficient of variation of over-ground test results yielded 0.03%, and stair climbing also obtained 0.14%, an indication of very high sensor repeatability.

The study was conducted using limited number of volunteers for the wearer trials.

By embedding textile piezoresistive sensors in some specific garments and or accessories, physical activity such as gait and its related data can be effectively measured.

To the best of our knowledge, this is the first application of piezoresistive sensing in the knee sleeve for stride estimation. Also, this study establishes that it is possible to attach (sew) already-knit textile strain sensors to apparel to effectuate smart functionality.

Following the imperative for human-centric digital innovation brought by the paradigm of Industry 5.0, the article aims to integrate the dispersed and multi-disciplinary literature on individual risks for workers to define, explain and predict individual risks related to Industry 4.0 technologies.

The paper follows the question, “What is the current knowledge and evidence base concerning risks related to Industry 4.0 technologies, and how can this inform digital innovation management in the manufacturing sector through the lens of the Industry 5.0 paradigm?” and uses the method of systematic literature review to identify and discuss potential risks for individuals associated with digital innovation. N = 51 contributions met the inclusion criteria.

The literature review indicates dominant trends and significant gaps in understanding risks from a human-centric perspective. The paper identifies individual risks, their interplay with different technologies and their antecedents at the social, organizational and individual levels. Despite this, the paper shows how the literature concentrates in studying risks on only a limited number of categories and/or concepts. Moreover, there is a lack of consensus in the theoretical and conceptual frameworks. The paper concludes by illustrating an initial understanding of digital innovation via a human-centered perspective on psychological risks.

Findings yield practical implications. In investing in the adoption, generation or recombination of new digital technologies in organizations, the paper recommends managers ensure to prevent risks at the individual level. Accordingly, the study’s findings can be used as a common starting point for extending the repertoire of managerial practices and interventions and realizing human-centric innovation.

Following the paradigm of Industry 5.0, the paper offers a holistic view of risks that incorporates the central role of the worker as crucial to the success of digital innovation. This human-centric perspective serves to inform the managerial field about important factors in risk management that can result in more effective targeted interventions in risk mitigation approaches. Lastly, it can serve to reinterpret digital innovation management and propose future avenues of research on risk.

The objective of this study is to address this central question: “What role do ICTs play in reducing poverty?”

First, in this study, we defined poverty in terms of its roots within health, economic development and education. Then, we conducted a systematic review of the information and communication technologies (ICTs) literature. From our analysis, we proposed a series of subsidiary questions and in-depth answers about the impact of ICTs on alleviating health-related, economic and educational causes of poverty.

This study observed positive effects of ICTs on healthcare, economic and educational dynamics and concluded that the development of more advanced infrastructure and greater access to such technology can amplify that impact.

This article explains how applications of ICT across sectors can substantially enhance quality of life and give people an opportunity to take control of their health-related, economic and educational futures. This study uniquely affords an integrative analysis of research and new thought about how to integrate key ICTs for more effective initiatives and investments to reduce poverty.

At the moment, in terms of both research and commercial products, smart shoe technology and applications seem not to attract the same magnitude of attention compared to smart garments and other smart wearables such as wrist watches and wrist bands. The purpose of this study is to fill this knowledge gap by discussing issues regarding smart shoe sensing technologies, smart shoe sensor placements, factors that affect sensor placements and finally the areas of smart shoe applications.

Through a review of relevant literature, this study first and foremost attempts to explain what constitutes a smart shoe and subsequently discusses the current trends in smart shoe applications. Discussed in this study are relevant sensing technologies, sensor placement and areas of smart shoe applications.

This study outlined 13 important areas of smart shoe applications. It also uncovered that majority of smart shoe functionality are physical activity tracking, health rehabilitation and ambulation assistance for the blind. Also highlighted in this review are some of the bottlenecks of smart shoe development.

To the best of the authors’ knowledge, this is the first comprehensive review paper focused on smart shoe applications, and therefore serves as an apt reference for researchers within the field of smart footwear.

This pragmatic research paper aims to unravel the smart vision-based method (SVBM), an AI program to correlate the computer vision (recorded and live videos using mobile and embedded cameras) that aids in manual lifting human pose deduction, analysis and training in the construction sector.

Using a pragmatic approach combined with the literature review, this study discusses the SVBM. The research method includes a literature review followed by a pragmatic approach and lab validation of the acquired data. Adopting the practical approach, the authors of this article developed an SVBM, an AI program to correlate computer vision (recorded and live videos using mobile and embedded cameras).

Results show that SVBM observes the relevant events without additional attachments to the human body and compares them with the standard axis to identify abnormal postures using mobile and other cameras. Angles of critical nodal points are projected through human pose detection and calculating body part movement angles using a novel software program and mobile application. The SVBM demonstrates its ability to data capture and analysis in real-time and offline using videos recorded earlier and is validated for program coding and results repeatability.

Literature review methodology limitations include not keeping in phase with the most updated field knowledge. This limitation is offset by choosing the range for literature review within the last two decades. This literature review may not have captured all published articles because the restriction of database access and search was based only on English. Also, the authors may have omitted fruitful articles hiding in a less popular journal. These limitations are acknowledged. The critical limitation is that the trust, privacy and psychological issues are not addressed in SVBM, which is recognised. However, the benefits of SVBM naturally offset this limitation to being adopted practically.

The theoretical and practical implications include customised and individualistic prediction and preventing most posture-related hazardous behaviours before a critical injury happens. The theoretical implications include mimicking the human pose and lab-based analysis without attaching sensors that naturally alter the working poses. SVBM would help researchers develop more accurate data and theoretical models close to actuals.

By using SVBM, the possibility of early deduction and prevention of musculoskeletal disorders is high; the social implications include the benefits of being a healthier society and health concerned construction sector.

Human pose detection, especially joint angle calculation in a work environment, is crucial to early deduction of muscoloskeletal disorders. Conventional digital technology-based methods to detect pose flaws focus on location information from wearables and laboratory-controlled motion sensors. For the first time, this paper presents novel computer vision (recorded and live videos using mobile and embedded cameras) and digital image-related deep learning methods without attachment to the human body for manual handling pose deduction and analysis of angles, neckline and torso line in an actual construction work environment.

This study aims to examine the effects of perceived product–brand fit and brand type on consumer evaluations of wearable smart masks’ technological, aesthetic and social attributes and how these affect consumers’ attitudes and intentions to use.

Through an experimental approach, a total of 240 US consumers’ evaluations of smart masks are compared according to perceived product–brand fit (high vs low) and brand type (electronics vs fashion).

The results showed that high perceived product–brand fit increases consumers’ evaluations, while brand type did not significantly affect consumers’ evaluations. Among various attributes, social acceptability had the greatest influence on consumers’ attitude and intention to use. Perceived ease of use, however, positively influenced attitude but negatively influenced intention to use.

As consumers’ interest in smart health-care wearables increases and air pollution is a serious issue across countries, research on wearable smart masks is being facilitated. Smart masks refer to the digitalized, reusable wearable masks that provide protection and health-care functions. However, their market penetration is still limited. To close this gap between smart mask technology and the market, this study examines how perceived fit and brand type can be used to enhance consumer evaluations.

This research aims to reveal the working principles of the decision mechanism that affects the use of neural implant acceptance and to discuss the leading role of digital literacy in this mechanism. In addition, it aimed to examine the theoretical connections of the research model with the conservation of resources (COR) and technology acceptance model (TAM) theories in the discussion.

The authors collected data from 300 individuals in an organization operating in the health sector and analyzed the data in the Smart Partial Least Squares (PLS) 3.3.3. This way, the authors determined the relationships between the variables, the path coefficients and the significance levels.

The study has found that strong digital literacy skills are linked to positive emotions and attitudes. Additionally, maintaining a positive mindset can improve one's understanding of ethics. Ethical attitudes and positive emotions can also increase the likelihood of adopting neural implants. Therefore, it is crucial to consider both technical and ethical concerns and emotions when deciding whether to use neural implants.

The research results determined the links between the cognitive, emotional and ethical factors in the cyborgization process of the employees and gave original insights to the managers and employees.

1. Determination of antecedents that affect individuals' acceptance of neural implant use.

2. Application to 300 individuals working in a health organization.

3. Path analysis using the least squares method via Smart PLS 3.3.3

4. Significant path coefficients among digital literacy, positive emotions, attitude, ethical understanding and acceptance of neural implant use.

Determination of antecedents that affect individuals' acceptance of neural implant use.

Application to 300 individuals working in a health organization.

Path analysis using the least squares method via Smart PLS 3.3.3

Significant path coefficients among digital literacy, positive emotions, attitude, ethical understanding and acceptance of neural implant use.

Selecting and using the same health monitoring devices for a particular problem is a tedious task. This paper aims to provide a comprehensive review of 40 research papers giving the Smart health monitoring system using Internet of things (IoT) and Deep learning.

Health Monitoring Systems play a significant role in the healthcare sector. The development and testing of health monitoring devices using IoT and deep learning dominate the healthcare sector.

In addition, the detailed conversation and investigation are finished by techniques and development framework. Authors have identified the research gap and presented future research directions in IoT, edge computing and deep learning.

The gathered research articles are examined, and the gaps and issues that the current research papers confront are discussed. In addition, based on various research gaps, this assessment proposes the primary future scope for deep learning and IoT health monitoring model.

This study aims to assess the readiness of both citizens and the government for digital participatory planning (DDP) as a contribution to the undergoing transformative shift toward smart and sustainable cities to address the challenges posed by rapid urbanization. While much attention has been devoted to leveraging technology to mitigate these challenges, there has been a relative lack of emphasis on engaging stakeholders in the planning process in a smart and inclusive manner. DPP stands as a cornerstone for the development of sustainable and smart cities. However, before DPP can be effectively implemented on the ground, it is crucial to assess the city readiness for DPP to ensure its success. This assessment is undertaken as part of Oman's broader initiative to transition into sustainable smart cities in alignment with the goals outlined in Oman Vision 2040.

A generic evaluation framework was identified, validated and customized to the local context by experts using the pile sorting technique based on the social constructivism theory. Then, the revised framework was used to evaluate the readiness of a sample of local citizens and government officials in Oman for the DPP concept.

The inferential statistical analysis revealed that citizens are willing to participate in DPP when trust and transparency with policymakers are enhanced. On the government side, the results showed that there is adequate infrastructure that can enable DPP, and planners have a positive attitude toward DPP provided that trust in citizens' opinions is strengthened. This study concludes with a roadmap for preparation for DPP implementation in smart sustainable cities mandated by Oman Vision 2040. The findings and roadmap can inform policy development, decision-making and urban planning practices toward more inclusive, participatory and technologically enabled urban environments.

The study contributes to the existing body of knowledge by emphasizing the significance of stakeholders' smart involvement in planning processes, social sustainability, evaluating city readiness for DPP and providing practical recommendations for DPP implementation in the context of smart sustainable cities. At a theoretical level, the study contributes a framework for assessing readiness for DPP and emphasizes that mutual trust is not only important for conventional participation practices but it is also essential for smart citizens. This study argues that a building or a city is not sustainable unless it is seen as such by its stakeholders, including the end users. Therefore, effective and smart involvement of the citizens in smart city planning is a precondition for the success of the future cities.

Advances in material agency driven by artificial intelligence (AI) have facilitated breakthroughs in material adaptivity enabling smart objects to autonomously provide individualized smart services, which makes smart objects act as social actors embedded in the real world. However, little is known about how material adaptivity fosters the infusion use of smart objects to maximize the value of smart services in customers' lives. This study examines the underlying mechanism of material adaptivity (task and social adaptivity) on AI infusion use, drawing on the theoretical lens of social embeddedness.

This study adopted partial least squares structural equation modeling (PLS-SEM), mediating tests, path comparison tests and polynomial modeling to analyze the proposed research model and hypotheses.

The results supported the proposed research model and hypotheses, except for the hypothesis of the comparative effects on infusion use. Besides, the results of mediating tests suggested the different roles of social embeddedness in the impacts of task and social adaptivity on infusion use. The post hoc analysis based on polynomial modeling provided a possible explanation for the unsupported hypothesis, suggesting the nonlinear differences in the underlying influencing mechanisms of instrumental and relational embeddedness on infusion use.

The formation mechanisms of AI infusion use based on material adaptivity and social embeddedness help to develop the business strategies that enable smart objects as social actors to exert a key role in users' daily lives, in turn realizing the social and economic value of AI.

This study advances the theoretical research on material adaptivity, updates the information system (IS) research on infusion use and identifies the bridging role of social embeddedness of smart objects as agentic social actors in the AI context.