Search results

This study aims to characterize the mechanical properties of sintered nano-silver under various sintering processes by nano-indentation tests.

Through microstructure observations and characterization, the influences of sintering process on the microstructure evolutions of sintered nano-silver were presented. And, the indentation load, indentation displacement curves of sintered silver under various sintering processes were measured by using nano-indentation test. Based on the nano-indentation test, a reverse analysis of the finite element calculation was used to determine the yielding stress and hardening exponent.

The porosity decreases with the increase of the sintering temperature, while the average particle size of sintered nano-silver increases with the increase of sintering temperature and sintering time. In addition, the porosity reduced from 34.88%, 30.52%, to 25.04% if the ramp rate was decreased from 25°C/min, 15°C/min, to 5°C/min, respectively. The particle size appears more frequently within 1 µm and 2 µm under the lower ramp rate. With reverse analysis, the strain hardening exponent gradually heightened with the increase of temperature, while the yielding stress value decreased significantly with the increase of temperature. When the sintering time increased, the strain hardening exponent increased slightly.

The mechanical properties of sintered nano-silver under different sintering processes are clearly understood.

This paper could provide a novel perspective on understanding the sintering process effects on the mechanical properties of sintered nano-silver.

This paper addresses a significant research gap in the study of Rayleigh surface wave propagation within a piezoelectric medium characterized by piezoelectric properties, thermal effects and voids. Previous research has often overlooked the crucial aspects related to voids. This study aims to provide analytical solutions for Rayleigh waves propagating through a medium consisting of a nonlocal piezo-thermo-elastic material with voids under the Moore–Gibson–Thompson thermo-elasticity theory with memory dependencies.

The analytical solutions are derived using a wave-mode method, and roots are computed from the characteristic equation using the Durand–Kerner method. These roots are then filtered based on the decay condition of surface waves. The analysis pertains to a medium subjected to stress-free and isothermal boundary conditions.

Computational simulations are performed to determine the attenuation coefficient and phase velocity of Rayleigh waves. This investigation goes beyond mere calculations and examines particle motion to gain deeper insights into Rayleigh wave propagation. Furthermore, this investigates how kernel function and nonlocal parameters influence these wave phenomena.

The results of this study reveal several unique cases that significantly contribute to the understanding of Rayleigh wave propagation within this intricate material system, particularly in the presence of voids.

This investigation provides valuable insights into the synergistic dynamics among piezoelectric constituents, void structures and Rayleigh wave propagation, enabling advancements in sensor technology, augmented energy harvesting methodologies and pioneering seismic monitoring approaches.

This study formulates a novel governing equation for a nonlocal piezo-thermo-elastic medium with voids, highlighting the significance of Rayleigh waves and investigating the impact of memory.

This paper aims to explore the influence of corrosion-deformation interactions (CDI) on the corrosion behavior and mechanisms of 316LN under applied tensile stresses.

Corrosion of metals would be aggravated by CDI under applied stress. Notably, the presence of nitrogen in 316LN austenitic stainless steel (SS) would enhance the corrosion resistance compared to the nitrogen-absent 316L SS. To clarify the CDI behaviors, electrochemical corrosion experiments were performed on 316LN specimens under different applied stress levels. Complementary analyses, including three-dimensional morphological examinations by KH-7700 digital microscope and scanning electron microscopy coupled with energy dispersive spectroscopy, were conducted to investigate the macroscopic and microscopic corrosion morphology and to characterize the composition of corrosion products within pits. Furthermore, ion chromatography was used to analyze the solution composition variations after immersion corrosion tests of 316LN in a 6 wt.% FeCl₃ solution compared to original FeCl₃ solution. Electrochemical experiment results revealed the linear decrease in free corrosion potential with increasing applied stress. Electrochemical impedance spectroscopy results indicated that high tensile stress level damaged the integrity of passivation film, as evidenced by the remarkable reduction in electrochemical impedance. Ion chromatography analyses proved the concentrations increase of NO₃⁻ and NH₄⁺ ion concentrations in the corrosion media after corrosion tests.

The enhanced corrosion resistance of 316LN SS is attributable to the presence of nitrogen.

The scope of this study is confined to the influence of tensile stress on the electrochemical corrosion of 316LN at ambient temperatures; it does not encompass the potential effects of elevated temperatures or compressive stress.

The resistance to stress electrochemical corrosion in SS may be enhanced through nitrogen alloying.

This paper presents a systematic investigation into the stress electrochemical corrosion of 316LN, marking the inaugural study of its impact on corrosion behaviors and underlying mechanisms.

The objectives of this study are twofold: firstly, to examine the effect of job variety on employee engagement and job burnout, and the effect of employee engagement and job burnout on employee happiness and job stress, respectively. Secondly, it examines the mediating role of employee engagement between job variety and employee happiness, as well as the mediating role of job burnout between job variety and job stress.

Data were collected from front-line nurses working in the health sector in Pakistan's major cities. A total of 169 samples were collected using online and face-to-face data collection approaches. The theoretical model was tested using the Partial Least Squares Structural Equation Modeling (PLS-SEM) in SmartPLS 4.0.

The findings of this study highlight that job variety has a positive impact on employee engagement, which in turn leads to employee happiness among professional frontline nurses. Additionally, job variety as a demand increases employee burnout, which subsequently increases frontline nurses' job stress. The results also indicate that employee engagement mediates the relationship between job variety and employee happiness, while burnout mediates the relationship between job variety and job stress.

To date, there has been little research investigating the dual impact of job variety, leaving a significant gap in the existing literature. This study aims to address this gap and provide implications for both academics and HR managers by challenging the misconception that job variety is always a positive job resource.

This study aims to develop a moderated mediation model that enables the examination of the direct relationship between brand orientation (BO) and export performance, the mediating effects of external and internal branding capabilities on the BO-export performance link, and the moderating influence of institutional environment, i.e. regulatory turbulence and policy support.

A time-lag primary data was collected from two-wave survey of 684 cross-industry exporting small and medium-sized enterprises (SMEs) using an online-email based survey technique, and the research model was validated using ordinary least squares regression analysis in SPSSV.27 and Hayes’ PROCESS macroV.2.13.

Regression findings indicate that the relationship between BO and export performance is not direct, but rather mediated by means of both external and internal branding capabilities. It further helps to uncover the dual role of institutional environment, with regulatory turbulence weakening and policy support strengthening the indirect influences of BO on export performance via external and internal branding capabilities.

This study advances branding literature by conceptualizing and empirically testing the role of BO associated with internal and external branding capabilities and, subsequently, with export performance.

The research findings indicate that brand-oriented SMEs must actively engage in the development of branding capabilities to improve their export performance.

While brand creation is essential for the success and growth of SMEs competing in the worldwide marketplaces, there is a dearth of research explaining the underlying mechanisms and boundary conditions through which BO influences export performance.

This article explores whether six broad categories of activities undertaken by Canadian business scholars’ academics: publications record, citations record, teaching load, administrative load, consulting activities, and knowledge spillovers transfer, are complementary, substitute, or independent, as well as the conditions under which complementarities, substitution and independence among these activities are likely to occur.

A multivariate probit model is estimated to take into account that business scholars have to consider simultaneously whether or not to undertake many different academic activities. Metrics from Google Scholar of scholars from 35 Canadian business schools, augmented by a survey data on factors explaining the productivity and impact performances of these faculty members, are used to explain the heterogeneities between the determinants of these activities.

Overall, the results reveal that there are complementarities between publications and citations, publications and knowledge spillovers transfer, citations and consulting, and between consulting and knowledge spillovers transfer. The results also suggest that there are substitution effects between publications and teaching, publications and administrative load, citations and teaching load, and teaching load and administrative load. Moreover, results show that public and private funding, business schools’ reputation, scholar’s relational resources, and business school size are among the most influential variables on the scholar’s portfolio of activities.

This study considers simultaneously the scholar’s whole portfolio of activities. Moreover, the determinants considered in this study to explain scholars’ engagement in different activities reconcile two conflicting perspectives: (1) the traditional self-managed approach of academics, and (2) the outcomes-focused approach of university management.

Polymer laser powder bed fusion (PBF-LB/P) is an additive manufacturing technology that is sustainable due to the possibility of recycling the powder multiple times and allowing the fabrication of gears without the aid of support structures and subsequent assembly. However, there are constraints in the process that negatively affect its adoption compared to other additive technologies such as material extrusion to produce gears. This study aims to demonstrate that it is possible to overcome the problems due to the physics of the process to produce accurate mechanism.

Technological aspects such as orientation, wheel-shaft thicknesses and degree of powder recycling were examined. Furthermore, the evolving tooth profile was considered as a design parameter to provide a manufacturability map of gear-based mechanisms.

Results show that there are some differences in the functioning of the gear depending on the type of powder used, 100% virgin or 50% virgin and 50% recycled for five cycles. The application of a groove on a gear produced with 100% virgin powder allows the mechanism to be easily unlocked regardless of the orientation and wheel-shaft thicknesses. The application of a specific evolutionary profile independent of the diameter of the reference circle on vertically oriented gears guarantees rotation continuity while preserving the functionality of the assembled mechanism.

In the literature, there are various studies on material aging and reuse in the PBF-LB/P process, mainly focused on the powder deterioration mechanism, powder fluidity, microstructure and mechanical properties of the parts and process parameters. This study, instead, was focused on the functioning of gears, which represent one of the applications in which this technology can have great success, by analyzing the two main effects that can compromise it: recycled powder and vertical orientation during construction.

This study aims to enhance merging of additive manufacturing (AM) techniques with powder injection molding (PIM). In this way, the prototypes could be 3D-printed and mass production implemented using PIM. Thus, the surface properties and mechanical performance of parts produced using powder/polymer binder feedstocks [material extrusion (MEX) and PIM] were investigated and compared with powder manufacturing based on direct metal laser sintering (DMLS).

PIM parts were manufactured from 17-4PH stainless steel PIM-quality powder and powder intended for powder bed fusion compounded with a recently developed environmentally benign binder. Rheological data obtained at the relevant temperatures were used to set up the process parameters of injection molding. The tensile and yield strengths as well as the strain at break were determined for PIM sintered parts and compared to those produced using MEX and DMLS. Surface properties were evaluated through a 3D scanner and analyzed with advanced statistical tools.

Advanced statistical analyses of the surface properties showed the proximity between the surfaces created via PIM and MEX. The tensile and yield strengths, as well as the strain at break, suggested that DMLS provides sintered samples with the highest strength and ductility; however, PIM parts made from environmentally benign feedstock may successfully compete with this manufacturing route.

This study addresses the issues connected to the merging of two environmentally efficient processing routes. The literature survey included has shown that there is so far no study comparing AM and PIM techniques systematically on the fixed part shape and dimensions using advanced statistical tools to derive the proximity of the investigated processing routes.

At the beginning of the 21st century, a new class of information workers, the “information have-less” has risen. This class of workers alleviates the influence of information and communication technologies (ICTs) revolution on poverty and unemployment. The purpose of this study is to investigate the presence of this class of workers in Egypt and assess the size and potential growth of this category of workers.

The study clarifies the conceptual framework of the new division of labor, in the information age. The Central Agency for Public Mobilization and Statistics, American Chamber of Commerce in Egypt, Ministry of Communications and Information Technology and Information and Decision Support Center websites provided secondary data for this study. These data are used to assess the size of “the information have less” in Egypt.

The division of work and class, in the 21st century, depends on the level of skills possessed to work with ICTs. So, class and labor nowadays could be divided into self-programmable labor (Innovators). Information have-less labor class, adding value to the economy by learning skills and presenting repetitive work. Generic labor class, who cannot work with ICTs, and work in jobs, that do not need computers or other ICTs. The study has shown that the “information have-less” labor class is present in Egypt since the beginning of the 21st century, in all its categories; entrepreneurism, the service sector and the manufacturing sector. There are approximately 50% of this labor class in the service sector and only 13% of the information have-less works in manufacturing sector despite the great opportunities that Egypt has to expand manufacturing to absorb more employment. The inclusion of information technology (IT), in all domains, has not decreased employment in Western countries but has reallocated information have-less employment toward the service sector, and there would probably be the same effect in Egypt.

The study highlights the need for Egyptian policymakers to encourage the manufacturing and service sectors to provide huge working opportunities. The Egyptian government has to change the educational policies, at all stages, to include digital learning skills so IT can be incorporated in a wide range of economic activities. Further research includes: conducting a survey to measure the contribution of the entrepreneurial part of the information have-less employment in Egypt. In addition, a model may be developed, by the researcher to examine the reallocation of employees in Egypt.

Studying employment, in Egypt, using the conceptual framework of the information age is rarely being done.