Search results

This study aims to characterize the mechanical properties of sintered nano-silver under various sintering processes by nano-indentation tests.

Through microstructure observations and characterization, the influences of sintering process on the microstructure evolutions of sintered nano-silver were presented. And, the indentation load, indentation displacement curves of sintered silver under various sintering processes were measured by using nano-indentation test. Based on the nano-indentation test, a reverse analysis of the finite element calculation was used to determine the yielding stress and hardening exponent.

The porosity decreases with the increase of the sintering temperature, while the average particle size of sintered nano-silver increases with the increase of sintering temperature and sintering time. In addition, the porosity reduced from 34.88%, 30.52%, to 25.04% if the ramp rate was decreased from 25°C/min, 15°C/min, to 5°C/min, respectively. The particle size appears more frequently within 1 µm and 2 µm under the lower ramp rate. With reverse analysis, the strain hardening exponent gradually heightened with the increase of temperature, while the yielding stress value decreased significantly with the increase of temperature. When the sintering time increased, the strain hardening exponent increased slightly.

The mechanical properties of sintered nano-silver under different sintering processes are clearly understood.

This paper could provide a novel perspective on understanding the sintering process effects on the mechanical properties of sintered nano-silver.

Exact solution of time–cost trade-off problem (TCTP) by the state-of-the-art meta-heuristic algorithms can be obtained for small- and medium-scale problems, while satisfactory results cannot be obtained for large construction projects. In this study, a hybrid heuristic meta-heuristic algorithm that adapts the search domain is developed to solve the large-scale discrete TCTP more efficiently.

Minimum cost slope–based heuristic network analysis algorithm (NAA), which eliminates the unfeasible search domain, is embedded into differential evolution meta-heuristic algorithm. Heuristic NAA narrows the search domain at the initial phase of the optimization. Moreover, activities with float durations higher than the predetermined threshold value are eliminated and then the meta-heuristic algorithm starts and searches the global optimum through the narrowed search space. However, narrowing the search space may increase the probability of obtaining a local optimum. Therefore, adaptive search domain approach is employed to make reintroduction of the eliminated activities to the design variable set possible, which reduces the possibility of converging into local minima.

The developed algorithm is compared with plain meta-heuristic algorithm with two separate analyses. In the first analysis, both algorithms have the same computational demand, and in the latter analysis, the meta-heuristic algorithm has fivefold computational demand. The tests on case study problems reveal that the developed algorithm presents lower total project costs according to the dependent t-test for paired samples with α = 0.0005.

In this study, TCTP is solved without considering quality or restrictions on the resources.

The proposed method enables to adapt the number of parameters, that is, the search domain and provides the opportunity of obtaining significant improvements on the meta-heuristic algorithms for other engineering optimization problems, which is the theoretical contribution of this study. The proposed approach reduces the total construction cost of the large-scale projects, which can be the practical benefit of this study.

The purpose of this paper is to present an automatic approach for mesh sizing field generation of complicated  computer-aided design (CAD) models.

In this paper, the authors present an automatic approach for mesh sizing field generation. First, a source point extraction algorithm is applied to capture curvature and proximity features of CAD models. Second, according to the distribution of feature source points, an octree background mesh is constructed for storing element size value. Third, mesh size value on each node of background mesh is calculated by interpolating the local feature size of the nearby source points, and then, an initial mesh sizing field is obtained. Finally, a theoretically guaranteed smoothing algorithm is developed to restrict the gradient of the mesh sizing field.

To achieve high performance, the proposed approach has been implemented in multithreaded parallel using OpenMP. Numerical results demonstrate that the proposed approach is remarkably efficient to construct reasonable mesh sizing field for complicated CAD models and applicable for generating geometrically adaptive triangle/tetrahedral meshes. Moreover, since the mesh sizing field is defined on an octree background mesh, high-efficiency query of local size value could be achieved in the following mesh generation procedure.

How to determine a reasonable mesh size for complicated CAD models is often a bottleneck of mesh generation. For the complicated models with thousands or even ten thousands of geometric entities, it is time-consuming to construct an appropriate mesh sizing field for generating high-quality mesh. A parallel algorithm of mesh sizing field generation with low computational complexity is presented in this paper, and its usability and efficiency have been verified.

This paper aims to explore the influence of corrosion-deformation interactions (CDI) on the corrosion behavior and mechanisms of 316LN under applied tensile stresses.

Corrosion of metals would be aggravated by CDI under applied stress. Notably, the presence of nitrogen in 316LN austenitic stainless steel (SS) would enhance the corrosion resistance compared to the nitrogen-absent 316L SS. To clarify the CDI behaviors, electrochemical corrosion experiments were performed on 316LN specimens under different applied stress levels. Complementary analyses, including three-dimensional morphological examinations by KH-7700 digital microscope and scanning electron microscopy coupled with energy dispersive spectroscopy, were conducted to investigate the macroscopic and microscopic corrosion morphology and to characterize the composition of corrosion products within pits. Furthermore, ion chromatography was used to analyze the solution composition variations after immersion corrosion tests of 316LN in a 6 wt.% FeCl₃ solution compared to original FeCl₃ solution. Electrochemical experiment results revealed the linear decrease in free corrosion potential with increasing applied stress. Electrochemical impedance spectroscopy results indicated that high tensile stress level damaged the integrity of passivation film, as evidenced by the remarkable reduction in electrochemical impedance. Ion chromatography analyses proved the concentrations increase of NO₃⁻ and NH₄⁺ ion concentrations in the corrosion media after corrosion tests.

The enhanced corrosion resistance of 316LN SS is attributable to the presence of nitrogen.

The scope of this study is confined to the influence of tensile stress on the electrochemical corrosion of 316LN at ambient temperatures; it does not encompass the potential effects of elevated temperatures or compressive stress.

The resistance to stress electrochemical corrosion in SS may be enhanced through nitrogen alloying.

This paper presents a systematic investigation into the stress electrochemical corrosion of 316LN, marking the inaugural study of its impact on corrosion behaviors and underlying mechanisms.

This paper aims to improve the permeability and antifouling of polysulfone (PSF) ultrafiltration membranes, the PSF matrix was modified by incorporating sulfonated polysulfone (SPSF).

Systematic investigations were conducted on the synergistic effects of a pore-forming agent, coagulation bath temperature and SPSF doping in the casting solution on blended ultrafiltration membranes. The chemical composition of the membranes was analyzed using Fourier transform infrared spectroscopy. The morphology and surface roughness of the membranes were characterized using scanning electron microscopy and atomic force microscopy. The hydrophilicity of the membrane surface was analyzed using a contact angle meter. The permeability and antifouling properties of the blended membranes were also investigated through filtration experiments.

The results indicated that the blended ultrafiltration membranes demonstrated an optimal overall performance when PVP-K30 content was 5.0 Wt.%, coagulation bath temperature was 30°C and SPSF content was 2.4 Wt.%. In comparison to a pure PSF ultrafiltration membrane, there was a significant increase in pure water flux (390.7 L·m⁻²·h⁻¹) by 2.2 times, while bovine serum albumin retention slightly decreased to 93.8%. In addition, the flux recovery rate improved by 2.1 times (71.4%) compared to that of the original PSF ultrafiltration membrane.

The method provided a simple and practical solution for improving the antifouling and permeability of PSF ultrafiltration membranes.

SPSF was anticipated to serve as an excellent modification additive for the preparation of ultrafiltration membranes with superior properties.

Due to the recent disruptions caused by COVID-19, global supply chains are stress tested. The affected supply chains have interfered with market tonnage prices for the yield of perishable products like mangoes that are highly dependent on their quality. This research, through empirical findings, thus determines and comprehends the factors influencing mango quality (size).

A framework is developed for finding the potential factors of quality building on the previous literature and studies on the available topic. The data collection included face-to-face interviews comprising 240 farmers, hired managers and preharvest contractors in India's Jangaon, Rangareddy and Yadadri Bhuvanagiri districts of Telangana state. The data analysis is done using multiple regression, and the outcomes form the basis of the design of the experiments model.

The empirical insights support that the quality of mango is affected by factors such as the number of picking cycles, the cost of fertilizer, the variety of fertilizers used, the variety of pesticides used and pesticide application frequency. The direct implications are the benefit to farmers in improving mango quality and maximizing profit per yield cycle.

To the best of the authors’ knowledge, the first research that has specifically focused on holistically improving the quality(size) of mangoes.

The findings contribute to the perishable supply chain literature, specifically to the mango study, to comprehensively showcase the factors impacting the quality of mangoes and provide guidance to farmers regarding orchard practices.

The cardiomegaly can be determined by the cardiothoracic ratio (CTR) which can be measured in a chest x-ray image. It is calculated based on a relationship between a size of heart and a transverse dimension of chest. The cardiomegaly is identified when the ratio is larger than a cut-off threshold. This paper aims to propose a solution to calculate the ratio for classifying the cardiomegaly in chest x-ray images.

The proposed method begins with constructing lung and heart segmentation models based on U-Net architecture using the publicly available datasets with the groundtruth of heart and lung masks. The ratio is then calculated using the sizes of segmented lung and heart areas. In addition, Progressive Growing of GANs (PGAN) is adopted here for constructing the new dataset containing chest x-ray images of three classes including male normal, female normal and cardiomegaly classes. This dataset is then used for evaluating the proposed solution. Also, the proposed solution is used to evaluate the quality of chest x-ray images generated from PGAN.

In the experiments, the trained models are applied to segment regions of heart and lung in chest x-ray images on the self-collected dataset. The calculated CTR values are compared with the values that are manually measured by human experts. The average error is 3.08%. Then, the models are also applied to segment regions of heart and lung for the CTR calculation, on the dataset computed by PGAN. Then, the cardiomegaly is determined using various attempts of different cut-off threshold values. With the standard cut-off at 0.50, the proposed method achieves 94.61% accuracy, 88.31% sensitivity and 94.20% specificity.

The proposed solution is demonstrated to be robust across unseen datasets for the segmentation, CTR calculation and cardiomegaly classification, including the dataset generated from PGAN. The cut-off value can be adjusted to be lower than 0.50 for increasing the sensitivity. For example, the sensitivity of 97.04% can be achieved at the cut-off of 0.45. However, the specificity is decreased from 94.20% to 79.78%.

The current predominant delivery format resulting from digitization is PDF, which is not appropriate for the blind, partially sighted and people who read on mobile devices. To meet the needs of both communities, as well as broader ones, alternative file formats are required. With the findings of the eBooks-On-Demand-Network Opening Publications for European Netizens project research, this study aims to improve access to digitized content for these communities.

In 2022, the authors conducted research on the digitization experiences of 13 EODOPEN partners at their organizations. The authors distributed the same sample of scans in English with different characteristics, and in accordance with Web content accessibility guidelines, the authors created 24 criteria to analyze their digitization workflows, output formats and optical character recognition (OCR) quality.

In this contribution, the authors present the results of a trial implementation among EODOPEN partners regarding their digitization workflows, used delivery file formats and the resulting quality of OCR results, depending on the type of digitization output file format. It was shown that partners using the OCR tool ABBYY FineReader Professional and producing scanning outputs in tagged PDF and PDF/UA formats achieved better results according to set criteria.

The trial implementations were limited to 13 project partners’ organizations only.

This research paper can be a valuable contribution to the field of massive digitization practices, particularly in terms of improving the accessibility of the output delivery file formats.

This study investigated what are the effective leadership styles and practices that boost employees’ work outcomes during the COVID-19 pandemic from the perspective of facilities management professionals (FMPs).

Three predominant leadership styles (transformational, transactional contingent reward and disaster management) were operationalized into 38 leadership practices (X variables) and 8 work outcomes (Y variables). The explanatory sequential research design was adopted. Online questionnaire survey was first conducted on FMPs who managed facilities during the critical periods of COVID-19 pandemic in Singapore. In-depth interviews were then carried out with subject matter experts to elaborate on the quantitative findings.

During the pandemic, FMPs were significantly stressed at work, but also experienced significant job satisfaction and satisfaction with their leaders/supervisors. Statistical results revealed a range of leadership practices that are significantly correlated with FMPs’ work outcomes. One leadership practice is critical as it affects 4 of the 8 FMPs’ work outcomes - frequently acknowledging employees’ good performance during the pandemic.

The study explored 3 leadership styles. There are other styles like laissez faire and servant leadership that might also affect work outcomes.

Based on the findings, suggestions were provided to organizations that employ FMPs on how to improve their work outcomes during a crisis such as a pandemic.

The novelty is the discovery that in the context of a global disaster such as the COVID-19 pandemic, the most relevant leadership styles to boost employees’ work outcomes are transactional contingent reward and disaster management leadership. The study adds to knowledge by showing that not one leadership style is superior – all 3 styles are complementary, but distinct, forms of leadership that need to work in tandem to boost FMPs’ work outcomes during a crisis such as a pandemic.

This study aims to propose that the corrosion resistance of the neat epoxy coating can be further enhanced by incorporating reinforcing agents.

Chitosan, silica and their hybrid compound were used to study the subject of corrosion resistance of epoxy coating systems. This work used 3.5 Wt.% NaCl solution as the electrolyte, and electrochemical impedance spectroscopy (EIS) was used to investigate the electrochemical behaviour of the studied coating systems. Standard and accelerated states were used without and with scratch on the coating layer.

It was found that the impedance value of composite coating incorporated with the hybrid compound was significantly higher at 10¹⁰ Ω after 14 days of exposure in both testing states. The breakpoint frequency (f_b) determination also proves with large capacitive region at low-to-high frequency of impedance plots corresponding to the high corrosion resistance.

The hybrid compound consisting of chitosan as organic biopolymer and silica as inorganic material, respectively, served as a promising reinforcing agent for composite coating as a promising corrosion inhibitor. Different states of EIS measurement were used which are standard (without scratch) and accelerated (with scratch) states associated with the f_b values.