Search results

This paper aims to synthesize a modular deployable truss antenna with the lower degree of freedom (DOF) and larger folding ratio. Because of the advantages of this kind of new truss antenna, the modules that make up the antenna can be deployed together by the synchronous motor drivers instead of twist springs to realize the controllable deployment.

The closed-loop branch equivalence method is proposed to synthesize the single DOF module and the large deployable reflector. The complex mechanism can be equivalently replaced by a simpler mechanism based on screw theory. The motion pairs are synthesized and optimized to make the curved surface achieve to the maximum folding ratio when the modular parabolic truss antenna is folded.

The results show that the 3(3RR-3RRR)-3RRR-3RRR planar module is a single DOF mechanism. Additionally, the adjacent parts of every two modules are connected with universal joints to obtain the new truss antenna when the modules are networked.

The configuration of this new modular deployable truss antenna can be synthesized to design the structure, and the proposed method can be applied to other space multi-loop coupling mechanism and other spacecraft.

This paper presents an approach to synthesizing the motion pairs, as well as the DOF analysis. The results lay a foundation for the further analysis of the deployable control and dynamics of this kind of antenna. And the new modular truss antenna has a practical application in aerospace engineering.

The purpose of this paper is to present a wall-climbing robot platform for heavy-load with negative pressure adsorption, which could be equipped with a six-degree of freedom (DOF) collaborative robot (Cobot) and detection device for inspecting the overwater part of concrete bridge towers/piers for large bridges.

By analyzing the shortcomings of existing wall-climbing robots in detecting concrete structures, a wall-climbing mobile manipulator (WCMM), which could be compatible with various detection devices, is proposed for detecting the concrete towers/piers of the Hong Kong-Zhuhai-Macao Bridge. The factors affecting the load capacity are obtained by analyzing the antislip and antioverturning conditions of the wall-climbing robot platform on the wall surface. Design strategies for each part of the structure of the wall-climbing robot are provided based on the influencing factors. By deriving the equivalent adsorption force equation, analyzed the influencing factors of equivalent adsorption force and provided schemes that could enhance the load capacity of the wall-climbing robot.

The adsorption test verifies the maximum negative pressure that the fan module could provide to the adsorption chamber. The load capacity test verifies it is feasible to achieve the expected bearing requirements of the wall-climbing robot. The motion tests prove that the developed climbing robot vehicle could move freely on the surface of the concrete structure after being equipped with a six-DOF Cobot.

The development of the heavy-load wall-climbing robot enables the Cobot to be installed and equipped on the wall-climbing robot, forming the WCMM, making them compatible with carrying various devices and expanding the application of the wall-climbing robot.

A heavy-load wall-climbing robot using negative pressure adsorption has been developed. The wall-climbing robot platform could carry a six-DOF Cobot, making it compatible with various detection devices for the inspection of concrete structures of large bridges. The WCMM could be expanded to detect the concretes with similar structures. The research and development process of the heavy-load wall-climbing robot could inspire the design of other negative-pressure wall-climbing robots.

The purpose of this paper is to present the design and implementation of a new manipulator with six joints driven by a single DC motor.

The manipulator consists of several modules, each of which has the twisting and pivoting degrees of freedom. Two clutches and one brake are mounted to control each joint. A clutch model based on PWM control is built to compute the average velocity of each clutch. Two parameters are involved in the model: PWM frequency and duty ratio. PWM frequency is limited by the natural frequencies of structure with all postures. The theoretical duty ratio should be adjusted according to the clutch model. Two experiments – line tracking and arc tracking – are carried out to verify the effectiveness of the control system.

The study has designed a manipulator with six joints driven by a single DC motor which powers all the modules through a main shaft and several clutches. In the manipulator, all the modules are supplied with a constant speed input and provide a bi‐directional variable output. Experimental results show the clutch model built for the manipulator can be applied to the joint control of all multi‐joint manipulators.

The paper describes a dexterous and light‐weight manipulator driven by a single motor and designed with bi‐directional joints.

Snake-inspired robots are of great significance in many fields because of their great adaptability to the environment. This paper aims to systematically illustrate the research progress of snake-inspired robots according to their application environments. It classifies snake-inspired robots according to the numbers of degrees of freedom in each joint and briefly describes the modeling and control of snake-inspired robots. Finally, the application fields and future development trends of snake-inspired robots are analyzed and discussed.

This paper summarizes the research progress of snake-inspired robots and clarifies the requirements of snake-inspired robots for self-adaptive environments and multi-functional tasks. By equipping various sensors and tool modules, snake-inspired robots are developed from fixed-point operation in a single environment to autonomous operation in an amphibious environment. Finally, it is pointed out that snake-inspired robots will be developed in terms of rigid and flexible deformable structure, long endurance and multi-function and intelligent autonomous control.

Inspired by the modular and reconfigurable concepts of biological snakes, snake-inspired robots are well adapted to unknown and changing environments. Therefore, snake-inspired robots will be widely used in industrial, military, medical, post-disaster search and rescue applications. Snake-inspired robots have become a hot research topic in the field of bionic robots.

This paper summarizes the research status of snake-inspired robots, which facilitates the reader to be a comprehensive and systematic understanding of the research progress of snake-inspired robots. This helps the reader to gain inspiration from biological perspectives.

The purpose of this paper is to describe the design and development of “Pylon-Climber II”, a 5-DOF biped climbing robot (degree of freedom – DOF) for moving on the external surface of a tower and assisting the electricians to complete some maintenance tasks.

The paper introduces a pole-climbing robot, which consists of a 5-DOF mechanical arm and two novel grippers. The gripper is composed of a two-finger clamping module and a retractable L-shaped hook module. The robot is symmetrical in structure, and the rotary joint for connecting two arms is driven by a linear drive mechanism.

The developed prototype proved a new approach for the inspection and maintenance of the electricity pylon. The gripper can reliably grasp the angle bars with different specifications by using combined movement of the two-finger clamping module and the retractable L-shaped hook module and provide sufficient adhesion force for the Pylon-Climber II.

The clamping experiments of the gripper and the climbing experiments of the robot were carried out on a test tower composed of some angle bars with different specification.

This paper includes the design and development of a 5-DOF biped climbing robot for electricity pylon maintenance. The climbing robot can move on the external surface of the electric power tower through grasping the angle bar alternatively. The gripper that is composed of a two-finger gripping module and a retractable L-shaped hook module is very compact and can provide reliable adhesion force for the climbing robot.

Reconfigurability of the assembly fixtures, which enables a set of sheet metal automotive parts to be produced on a single production line, is becoming crucial to maintaining competitiveness in the rapidly changing market. One of the key issues in reconfigurable fixture design is to identify the fixture configuration and make sure there is enough workspace for a family of parts. The purpose of this paper is to address this issue, through the design and analysis of two novel reconfigurable fixturing robots.

Following an introduction, the application of the reconfigurable fixturing robot addressed in this paper is described; it is characterized by using parallel manipulator as programmable fixture elements. Kinematic design and reconfigurable design of the fixturing robot is presented based on screw theory and modularized design, respectively.

The proposed reconfigurable fixturing robots can transform their configurations with 4 DoF (degrees‐of‐freedom), and have a continuous workspace for their application.

Reconfigurability of the assembly fixtures is an important issue for automotive manufacturing, due to the highly competitive nature of this industry. The proposed reconfigurable fixturing robots can greatly facilitate the development of new models of vehicles.

This paper aims to present a soft closed-chain modular gripper for robotic pick-and-place applications. The proposed biomimetic gripper design is inspired by the Fin Ray effect, derived from fish fins physiology. It is composed of three axisymmetric fingers, actuated with a single actuator. Each finger has a modular under-actuated closed-chain structure. The finger structure is compliant in contact normal direction, with stiff crossbeams reorienting to help the finger structure conform around objects.

Starting with the design and development of the proposed gripper, a consequent mathematical representation consisting of closed-chain forward and inverse kinematics is detailed. The proposed mathematical framework is validated through the finite element modeling simulations. Additionally, a set of experiments was conducted to compare the simulated and prototype finger trajectories, as well as to assess qualitative grasping ability.

Key Findings are the presented mathematical model for closed-loop chain mechanisms, as well as design and optimization guidelines to develop controlled closed-chain grippers.

The proposed methodology and mathematical model could be taken as a fundamental modular base block to explore similar distributed degrees of freedom (DOF) closed-chain manipulators and grippers. The enhanced kinematic model contributes to optimized dynamics and control of soft closed-chain grasping mechanisms.

The approach is aimed to improve the development of soft grippers that are required to grasp complex objects found in human–robot cooperation and collaborative robot (cobot) applications.

The proposed closed-chain mathematical framework is based on distributed DOFs instead of the conventional lumped joint approach. This is to better optimize and understand the kinematics of soft robotic mechanisms.

Aims to describe design, prototyping and characteristics of a pole climbing/manipulating robot with ability of passing bends and branches of the pole.

Introducing a hybrid (parallel/serial) four degree of freedom (DOF) mechanism as the main part of the robot and also introduces a unique gripper design for pole climbing robots.

Finds that a robot, with the ability of climbing and manipulating on poles with bends and branches, needs at least 4 DOFs. Also an electrical cylinder is a good option for climbing robots and has some advantages over pneumatic or hydraulic cylinders.

The robot is semi‐industrial size. Design and manufacturing of an industrial size robot are a good suggestion for future works.

With some changes on the gripper module and the last tool module, the robot is able to do some service works like pipe testing, pipe/pole cleaning, light bulb changing in highways etc.

Design and manufacturing of a pole‐climbing and manipulating robot with minimum DOFs for construction and service works.

This study aims to introduce the DoraHand, and the basic capability and performance have been verified in this paper. Besides the idea of sharing modular design and sensor design, the authors want to deliver an affordable and practical dexterous hand to the research area to contribute to the robotic manipulation area.

This paper introduced the DoraHand, a novel scalable and practical modular dexterous hand, which, adopting modular finger and palm design, fully actuated joint and tactile sensors, can improve the dexterity for robotic manipulation and lower the complexity of maintenance. A series of experiments are delivered to verify the performance of the hand and sensor module.

The parameters of the DoraHand are verified and suitable for the research of robotics manipulation area, the sensing capability has been tested with the static experiment and the slip prediction algorithm. And, the advantage of modular design and extensible interface have been verified by the real application.

The authors continue improving the DoraHand and extend it to more different applications. The authors want to make the DoraHand as a basic research platform in the robotic manipulation area.

The DoraHand has been sent to more than ten different research institutes for different research applications. The authors continue working on this hand for better performance, easier usage and more affordability.

This kind of dexterous hand can help researchers get rid of complex physical issues and pay more attention to the algorithm part; it can help to make robotic manipulation work more popular.

The key design in the DoraHand is the modular finger and sensing module. With the special design in mechanical and electrical parts, the authors build reliable hardware and can support the diversity requirement in the robotic manipulation area. The hand with tactile sensing capability can be used in more research and applications with its extensibility.

The paper aims to present the processing pipeline of an assembly immersive simulation application which can manage the interaction between the virtual scene and user using stereoscopic display and haptic devices. A new set of elements are integrated in a Collaborative Virtual Environment (CVE) and validated using an approach based on subjective and objective users’ performance criteria. The developed application is intended for Assembly/Disassembly (A/D) analysis, planning and training.

A mobility module based on contact information is used to handle the assembly components’ movements through real-time management of collision detection and kinematically constraint guidance. Information on CVE architecture, modules and application configuration process are presented. Impact of device type (3 degrees of freedom (DoFs) vs 6 DoFs) over user’s experience is evaluated. Parameters (number of assembled components and components assembly time) are measured for each user and each haptic device, and results are compared and discussed.

Test results proved the efficiency of using a mobility module based on predefined kinematic constraints for reducing the complexity of collision detection algorithms in real-time assembly haptic simulations. Also, experiments showed that, generally, users performed better with 3 DoFs haptic device compared to 6 DoFs haptic equipment.

The proposed immersive application automates the kinematical joints inference from 3D computer-aided design (CAD) assembly models and integrates it within a haptic-based virtual environment, for increasing the efficiency of A/D process simulations.