Search results

This paper aims to present a case study of virtual-reality-based product demonstrations featuring items of furniture. The results will be of use in further design and development of virtual-reality-based product demonstration systems and could also support effective student learning.

A new method was introduced to guide the experiment by confirming orthogonal arrays. User interactions were then planned, and a furniture demonstration system was implemented. The experiment comprised two stages. In the evaluation stage, participants were invited to experience the virtual-reality (VR)-based furniture demonstration system and complete a user experience (UX) survey. Taguchi-style robust design methods were used to design orthogonal table experiments and planning and design operation methods were used to implement an experimental display system in order to obtain optimized combinations of control factors and levels. The second stage involved a confirmatory test for the optimized combinations. A pilot questionnaire was first applied to survey demonstration scenarios that are important to customers.

The author found in terms of furniture products, product interactive display through VR can achieve good user satisfaction through quality design planning. VR can better grasp the characteristics of products than paper catalogs and website catalogs. And VR can better grasp the characteristics of products than online videos. For “interactive inspection”, “function simulation”, “style customization” and “set-out customization” were the most valuable demonstration scenarios for customers. The results of the experiment confirmed that the “overall rating”, “hedonic appeal” and “practical quality” were the three most important optimized operating methods, constituting a benchmark of user satisfaction.

The author found that it is possible to design and build a VR-based furniture demonstration system with a good level of usability when a suitable quality design method is applied. The optimized user interaction indicators and implementation experience for the VR-based product demonstration presented in this study will be of use in further design and development of similar systems.

There are two purposes in this paper. The first one is to explore the impact mechanisms and paths of service-oriented manufacturing (SOM) on the sustainability performance of green manufacturing firms and to pay particular attention to the mediating role of enterprise costs in the relationship between the two. The second one is to reveal the dynamic process and laws of SOM influencing on the sustainability performance of green manufacturing enterprises.

This paper employs a combination of dynamic and static research from two aspects. On the one hand, based on 495 green manufacturing firms in China, the authors verify the SEM of SOM, enterprise cost and sustainability performance of green manufacturing firms through empirical research, analyze the path relationship and mediation effect, and demonstrate its complex impact mechanism. On the other hand, the authors use agent-based modeling and simulation to reveal the dynamic influence of SOM on the sustainability performance of green manufacturing enterprises and explore its dynamic laws and future development trends.

The study results indicate that (1) SOM has a direct positive effect on firm sustainability performance. (2) Reducing firm costs has a positive effect on firm sustainability performance, and firm costs play a partial mediating role in the mechanism by which SOM influences firm sustainability performance. (3) The dynamic impact of SOM on sustainability performance increases significantly over time. (4) Significant firm heterogeneity exists in the process by which SOM improves sustainability performance. (5) There are differences in the promotion of SOM for economic performance, environmental performance and social performance.

This paper makes two main contributions. First, compared with previous research on sustainability performance focusing on a certain dimension, this paper organically integrates the three dimensions of sustainability performance, regards them as a whole and considers the paths to improve sustainability performance. Second, this paper focuses on the complex relationship among SOM, enterprise costs and sustainability performance and reveals different sustainability performance improvement paths and dynamic impact processes, thereby expanding and deepening previous research on sustainability on the subject. These contributions lead to a better understanding of the driving forces and realization path for green manufacturing firms' sustainability performance from an integrated static and dynamic perspective.

The digital warehouse management system is an emergence that forms a critical part of the transformation of economic structure in Industry 4.0. In the present business scenario, the warehouse management system encounters a messy layout, poor damage control, unsatisfactory order management, lack of visibility and lack of technological interventions. Digital twin (DT) based warehouse system shows the ontology and knowledge graphs for competitive advantage by consolidating and transferring goods directly from an inbound supplier to an outbound customer on short notice and with no or limited storage. There remains a lack of clarity on how the DT can be implemented successfully in warehouse management.

The current literature remains largely unstructured and scattered due to a lack of a systematic approach to integrating the research implications and analysis. This paper probes the conceptualization of the DT with the help of theoretical analysis using the systematic literature analysis method.

The study explores essential concepts such as interoperability and integrability in implementing DT. Further, it analyzes the role of a supply chain control tower (SCCT) in modern supply chain management. A research framework is proposed for practitioners and academicians by incorporating the opportunities and challenges associated with DT implementation. The research findings are mainly threefold: Conceptualization of DT, Featuring SCCT and Exploration of cross-computer platform interfaces, scalability and maintenance strategies.

This study is among the first to analyze and review DT applications in warehouse management. Moreover, the study proposes a theoretical toolbox for the practitioners to successfully implement the DT in warehouse DT-based warehouse management system: A theoretical toolbox for future research and applications.

With increasing complexity of construction projects and new construction processes and methods are adopted, more safety hazards are emerging at construction sites, requiring the application of the modern risk management methods. As an emerging technology, digital twin has already made valuable contributions to safety risk management in many fields. Therefore, exploring the application of digital twin technology in construction safety risk management is of great significance. The purpose of this study is to explore the current research status and application potential of digital twin technology in construction safety risk management.

This study followed a four-stage literature processing approach as outlined in the systematic literature review procedure guidelines. It then combined the quantitative analysis tools and qualitative analysis methods to organize and summarize the current research status of digital twin technology in the field of construction safety risk management, analyze the application of digital twin technology in construction safety risk management and identify future research trends.

The research findings indicate that the application of digital twin technology in the field of construction safety risk management is still in its early stages. Based on the results of the literature analysis, this paper summarizes five aspects of digital twin technology's application in construction safety risk management: real-time monitoring and early warning, safety risk prediction and assessment, accident simulation and emergency response, safety risk management decision support and safety training and education. It also proposes future research trends based on the current research challenges.

This study provides valuable references for the extended application of digital twin technology and offers a new perspective and approach for modern construction safety risk management. It contributes to the enhancement of the theoretical framework for construction safety risk management and the improvement of on-site construction safety.

This study aims to investigate the thermal fracture mechanism of moisture-preconditioned SAC305 ball grid array (BGA) solder joints subjected to multiple reflow and thermal cycling.

The BGA package samples are subjected to JEDEC Level 1 accelerated moisture treatment (85 °C/85%RH/168 h) with five times reflow at 270 °C. This is followed by multiple thermal cycling from 0 °C to 100 °C for 40 min per cycle, per IPC-7351B standards. For fracture investigation, the cross-sections of the samples are examined and analysed using the dye-and-pry technique and backscattered scanning electron microscopy. The packages' microstructures are characterized using an energy-dispersive X-ray spectroscopy approach. Also, the package assembly is investigated using the Darveaux numerical simulation method.

The study found that critical strain density is exhibited at the component pad/solder interface of the solder joint located at the most distant point from the axes of symmetry of the package assembly. The fracture mechanism is a crack fracture formed at the solder's exterior edges and grows across the joint's transverse section. It was established that Au content in the formed intermetallic compound greatly impacts fracture growth in the solder joint interface, with a composition above 5 Wt.% Au regarded as an unsafe level for reliability. The elongation of the crack is aided by the brittle nature of the Au-Sn interface through which the crack propagates. It is inferred that refining the solder matrix elemental compound can strengthen and improve the reliability of solder joints.

Inspection lead time and additional manufacturing expenses spent on investigating reliability issues in BGA solder joints can be reduced using the study's findings on understanding the solder joint fracture mechanism.

Limited studies exist on the thermal fracture mechanism of moisture-preconditioned BGA solder joints exposed to both multiple reflow and thermal cycling. This study applied both numerical and experimental techniques to examine the reliability issue.

This study aims to investigate the morphing concepts able to manipulate the dynamics of the downstream unsteadiness in the separated shear layers and, in the wake, be able to modify the upstream shock–boundary layer interaction (SBLI) around an A320 morphing prototype to control these instabilities, with emphasis to the attenuation or even suppression of the transonic buffet. The modification of the aerodynamic performances according to a large parametric study carried out at Reynolds number of 4.5 × 10⁶, Mach number of 0.78 and various angles of attack in the range of (0, 2.4)° according to two morphing concepts (travelling waves and trailing edge vibration) are discussed, and the final benefits in aerodynamic performance increase are evaluated.

This article examines through high fidelity (Hi-Fi) numerical simulation the effects of the trailing edge (TE) actuation and of travelling waves along a specific area of the suction side starting from practically the most downstream position of the shock wave motion according to the buffet and extending up to nearly the TE. The present paper studies through spectral analysis the coherent structures development in the near wake and the comparison of the aerodynamic forces to the non-actuated case. Thus, the physical mechanisms of the morphing leading to the increase of the lift-to-drag ratio and the drag and noise sources reduction are identified.

This study investigates the influence of shear-layer and near-wake vortices on the SBLI around an A320 aerofoil and attenuation of the related instabilities thanks to novel morphing: travelling waves generated along the suction side and trailing-edge vibration. A drag reduction of 14% and a lift-to-drag increase in the order of 8% are obtained. The morphing has shown a lift increase in the range of (1.8, 2.5)% for angle of attack of 1.8° and 2.4°, where a significant lift increase of 7.7% is obtained for the angle of incidence of 0° with a drag reduction of 3.66% yielding an aerodynamic efficiency of 11.8%.

This paper presents results of morphing A320 aerofoil, with a chord of 70cm and subjected to two actuation kinds, original in the state of the art at M = 0.78 and Re = 4.5 million. These Hi-Fi simulations are rather rare; a majority of existing ones concern smaller dimensions. This study showed for the first time a modified buffet mode, displaying periodic high-lift “plateaus” interspersed by shorter lift-decrease intervals. Through trailing-edge vibration, this pattern is modified towards a sinusoidal-like buffet, with a considerable amplitude decrease. Lock-in of buffet frequency to the actuation is obtained, leading to this amplitude reduction and a drastic aerodynamic performance increase.

Owing to the toxicity, biodegradability, and cost of most corrosion inhibitors, research attention is now focused on the development of environmentally benign, biodegradable, cheap, and efficient options. In consideration of these facts, chrysin, a phytocompound of Populus tomentosa (Chinese white poplar) has been isolated and investigated for its anticorrosion abilities on carbon steel in a mixed acid and chloride system. This highlights the main purpose of the study.

Chrysin was isolated from Populus tomentosa using column chromatography and characterized using Fourier Transform Infrared Spectroscopy and Nuclear Magnetic Resonance Spectroscopy. The investigations are outlined based on theory (Fukui indices, condensed density functional theory and molecular dynamic simulation) and experiments (electrochemical, gravimetry and surface morphology examinations).

Theoretical evaluations permitted the description of the adsorption characteristics, and molecular interactions and orientations of chrysin on Fe substrate. The interaction energy for protonated and neutral chrysin on Fe (110) were −149.10 kcal/mol and −143.28 kcal/mol, respectively. Moreover, experimental investigations showed that chrysin is a potent mixed-type corrosion inhibitor for steel, whose effectiveness depends on its surrounding temperature and concentration. The optimum inhibition efficiency of 78.7% after 24 h for 1 g/L chrysin at 298 K indicates that the performance of chrysin, as a pure compound, compares favorably with other phytocompounds and plant extracts investigated under similar conditions. However, the inhibition efficiency decreased to 62.5% and 51.8% at 318 K after 48 h and 72 h, respectively.

The novelty of this study relies on the usage of a pure compound in corrosion suppression investigation, thus eliminating the unknown influences obtainable by the presence of multi-phytocompounds in plant extracts, thereby advancing the commercialization of bio-based corrosion inhibitors.

The purpose of this paper is to investigate the process by which the level of immersion in virtual reality-based behavioral simulation (VR-BS) impacts on the non-cognitive and cognitive outcomes. The cognitive outcome is measured using the increase in the level of Sharia financial literacy, while the noncognitive outcome is measured using the behavioral intention to use VR-BS.

The method consists of two parts: First, the development of VR-BS, in the context of sharia financial literacy, using the waterfall model. Second, testing the effectiveness of VR-BS using the theory of interactive media effects framework. The participants were 142 students from three secondary schools (two Islamic religious schools and one public school) in Yogyakarta and Central Java, Indonesia. Partial least squares structural equation modeling was used for testing the hypotheses.

VR-BS creates a perceived coolness and vividness, which in turn has an impact on increasing the participants’ engagement. Also, the use of VR has an impact on natural mapping, which increases a user’s engagement through its perceived ease of use. As predicted, the user’s engagement affects VR’s behavior, mediated by the user’s attitude toward VR media. VR’s interactivity, however, does not impact on the cognitive aspect.

The participants were not randomly selected, as the data were collected during the COVID-19 pandemic. As a result, the majority of the participants had never tried VR before this study. The participants, however, were digital natives.

It is implied from the findings that Islamic financial business actors and the relevant government agencies (e.g. the Indonesian Financial Services Authority [OJK], the Ministry of Education, Culture, Research and Technology and the Ministry of Religious Affairs) should collaborate to best prepare the future generation of ummah by using VR-BS in their joint promotion and education programs. The results of the current study reveal that the use of VR-BS may attract people to engage in Islamic financial activities. By engaging in such activities, or at least engaging in real-life simulations/classes/workshops, people may gradually acquire more knowledge about Islamic finance.

As predicted, the user’s engagement has an impact on behavior toward VR-BS, which is mediated by attitude toward VR-BS.

The study aims to equip robots with the ability to precisely maintain interaction forces, which is crucial for tasks such as polishing in highly dynamic environments with unknown and varying stiffness and geometry, including those found in airplane wings or thin, soft materials. The purpose of this study is to develop a novel adaptive force-tracking admittance control scheme aimed at achieving a faster response rate with higher tracking accuracy for robot force control.

In the proposed method, the traditional admittance model is improved by introducing a pre-proportional-derivative controller to accelerate parameter convergence. Subsequently, the authors design an adaptive law based on fuzzy logic systems (FLS) to compensate for uncertainties in the unknown environment. Stability conditions are established for the proposed method through Lyapunov analysis, which ensures the force tracking accuracy and the stability of the coupled system consisting of the robot and the interaction environment. Furthermore, the effectiveness and robustness of the proposed control algorithm are demonstrated by simulation and experiment.

A variety of unstructured simulations and experimental scenarios are designed to validate the effectiveness of the proposed algorithm in force control. The outcomes demonstrate that this control strategy excels in providing fast response, precise tracking accuracy and robust performance.

In real-world applications spanning industrial, service and medical fields where accurate force control by robots is essential, the proposed method stands out as both practical and straightforward, delivering consistently satisfactory performance across various scenarios.

This research introduces a novel adaptive force-tracking admittance controller based on FLS and validated through both simulations and experiments. The proposed controller demonstrates exceptional performance in force control within environments characterized by unknown and varying.

Occupant behavior can lead to considerable uncertainties in thermal comfort and air quality within buildings. To tackle this challenge, the use of probabilistic controls to simulate occupant behavior has emerged as a potential solution. This study seeks to analyze the performance of free-running households by examining adaptive thermal comfort and CO2 concentration, both crucial variables in indoor air quality. The investigation of indoor environment dynamics caused by the occupants' behavior, especially after the COVID-19 pandemic, became increasingly important. Specifically, it investigates 13 distinct window and shading control strategies in courtyard houses to identify the factors that prompt occupants to interact with shading and windows and determine which control approach effectively minimizes the performance gap.

This paper compares commonly used deterministic and probabilistic control functions and their effects on occupant comfort and indoor air quality in four zones surrounding a courtyard. The zones are differentiated by windows facing the courtyard. The study utilizes the energy management system (EMS) functionality of EnergyPlus within an algorithmic interface called Ladybug Tools. By modifying geometrical dimensions, orientation, window-to-wall ratio (WWR) and window operable fraction, a total of 465 cases are analyzed to identify effective control scenarios. According to the literature, these factors were selected because of their potential significant impact on occupants’ thermal comfort and indoor air quality, in addition to the natural ventilation flow rate. Additionally, the Random Forest algorithm is employed to estimate the individual impact of each control scenario on indoor thermal comfort and air quality metrics, including operative temperature and CO2 concentration.

The findings of the study confirmed that both deterministic and probabilistic window control algorithms were effective in reducing thermal discomfort hours, with reductions of 56.7 and 41.1%, respectively. Deterministic shading controls resulted in a reduction of 18.5%. Implementing the window control strategies led to a significant decrease of 87.8% in indoor CO2 concentration. The sensitivity analysis revealed that outdoor temperature exhibited the strongest positive correlation with indoor operative temperature while showing a negative correlation with indoor CO2 concentration. Furthermore, zone orientation and length were identified as the most influential design variables in achieving the desired performance outcomes.

It’s important to acknowledge the limitations of this study. Firstly, the potential impact of air circulation through the central zone was not considered. Secondly, the investigated control scenarios may have different impacts on air-conditioned buildings, especially when considering energy consumption. Thirdly, the study heavily relied on simulation tools and algorithms, which may limit its real-world applicability. The accuracy of the simulations depends on the quality of the input data and the assumptions made in the models. Fourthly, the case study is hypothetical in nature to be able to compare different control scenarios and their implications. Lastly, the comparative analysis was limited to a specific climate, which may restrict the generalizability of the findings in different climates.

Occupant behavior represents a significant source of uncertainty, particularly during the early stages of design. This study aims to offer a comparative analysis of various deterministic and probabilistic control scenarios that are based on occupant behavior. The study evaluates the effectiveness and validity of these proposed control scenarios, providing valuable insights for design decision-making.