Search results

This paper aims to propose a simulation-based performance evaluation model for the drone-based delivery of aid items to disaster-affected areas. The objective of the model is to perform analytical studies, evaluate the performance of drone delivery systems for humanitarian logistics and can support the decision-making on the operational design of the system – on where to locate drone take-off points and on assignment and scheduling of delivery tasks to drones.

This simulation model captures the dynamics and variabilities of the drone-based delivery system, including demand rates, location of demand points, time-dependent parameters and possible failures of drones’ operations. An optimization model integrated with the simulation system can update the optimality of drones’ schedules and delivery assignments.

An extensive set of experiments was performed to evaluate alternative strategies to demonstrate the effectiveness for the proposed optimization/simulation system. In the first set of experiments, the authors use the simulation-based evaluation tool for a case study for Central Florida. The goal of this set of experiments is to show how the proposed system can be used for decision-making and decision-support. The second set of experiments presents a series of numerical studies for a set of randomly generated instances.

The goal is to develop a simulation system that can allow one to evaluate performance of drone-based delivery systems, accounting for the uncertainties through simulations of real-life drone delivery flights. The proposed simulation model captures the variations in different system parameters, including interval of updating the system after receiving new information, demand parameters: the demand rate and their spatial distribution (i.e. their locations), service time parameters: travel times, setup and loading times, payload drop-off times and repair times and drone energy level: battery’s energy is impacted and requires battery change/recharging while flying.

This research analyses challenges faced by users at various levels in planning and designing participatory simulation models of cities. It aims to identify issues that hinder experts from maximising the effectiveness of the SUMO tool. Additionally, evaluating current methods highlights their strengths and weaknesses, facilitating the use of participatory simulation advantages to address these issues. Finally, the presented case studies illustrate the diversity of user groups and emphasise the need for further development of blueprints.

In this research, action research was used to assess and improve a step-by-step guideline. The guideline's conceptual design is based on stakeholder analysis results from those involved in developing urban logistics scenarios and feedback from potential users. A two-round process of application and refinement was conducted to evaluate and enhance the guideline's initial version.

The guidelines still demand an advanced skill level in simulation modelling, rendering them less effective for the intended audience. However, they have proven beneficial in a simulation course for students, emphasising the importance of developing accurate conceptual models and the need for careful implementation.

This paper introduces a step-by-step guideline designed to tackle challenges in modelling urban logistics scenarios using SUMO simulation software. The guideline's effectiveness was tested and enhanced through experiments involving diverse groups of students, varying in their experience with simulation modelling. This approach demonstrates the guideline's applicability and adaptability across different skill levels.

Simulations exist for the prediction of the behaviour of building structural systems under fire, including two-way coupled fire-structure interaction. However, these simulations do not include detailed models of the connections, whereas these connections may impact the overall behaviour of the structure. Therefore, this paper proposes a two-scale method to include screw connections.

The two-scale method consists of (a) a global-scale model that models the overall structural system and (b) a small-scale model to describe a screw connection. Components in the global-scale model are connected by a spring element instead of a modelled screw, and the stiffness of this spring element is predicted by the small-scale model, updated at each load step. For computational efficiency, the small-scale model uses a proprietary technique to model the behaviour of the threads, verified by simulations that model the complete thread geometry, and validated by existing pull-out experiments. For four screw failure modes, load-deformation behaviour and failure predictions of the two-scale method are verified by a detailed system model. Additionally, the two-scale method is validated for a combined load case by existing experiments, and demonstrated for different temperatures. Finally, the two-scale method is illustrated as part of a two-way coupled fire-structure simulation.

It was shown that proprietary ”threaded connection interaction” can predict thread relevant failure modes, i.e. thread failure, shank tension failure, and pull-out. For bearing, shear, tension, and pull-out failure, load-deformation behaviour and failure predictions of the two-scale method correspond with the detailed system model and Eurocode predictions. Related to combined load cases, for a variety of experiments a good correlation has been found between experimental and simulation results, however, pull-out simulations were shown to be inconsistent.

More research is needed before the two-scale method can be used under all conditions. This relates to the failure criteria for pull-out, combined load cases, and temperature loads.

The two-scale method bridges the existing very detailed small-scale screw models with present global-scale structural models, that in the best case only use springs. It shows to be insightful, for it contains a functional separation of scales, revealing their relationships, and it is computationally efficient as it allows for distributed computing. Furthermore, local small-scale non-convergence (e.g. a screw failing) can be handled without convergence problems in the global-scale structural model.

There are two purposes in this paper. The first one is to explore the impact mechanisms and paths of service-oriented manufacturing (SOM) on the sustainability performance of green manufacturing firms and to pay particular attention to the mediating role of enterprise costs in the relationship between the two. The second one is to reveal the dynamic process and laws of SOM influencing on the sustainability performance of green manufacturing enterprises.

This paper employs a combination of dynamic and static research from two aspects. On the one hand, based on 495 green manufacturing firms in China, the authors verify the SEM of SOM, enterprise cost and sustainability performance of green manufacturing firms through empirical research, analyze the path relationship and mediation effect, and demonstrate its complex impact mechanism. On the other hand, the authors use agent-based modeling and simulation to reveal the dynamic influence of SOM on the sustainability performance of green manufacturing enterprises and explore its dynamic laws and future development trends.

The study results indicate that (1) SOM has a direct positive effect on firm sustainability performance. (2) Reducing firm costs has a positive effect on firm sustainability performance, and firm costs play a partial mediating role in the mechanism by which SOM influences firm sustainability performance. (3) The dynamic impact of SOM on sustainability performance increases significantly over time. (4) Significant firm heterogeneity exists in the process by which SOM improves sustainability performance. (5) There are differences in the promotion of SOM for economic performance, environmental performance and social performance.

This paper makes two main contributions. First, compared with previous research on sustainability performance focusing on a certain dimension, this paper organically integrates the three dimensions of sustainability performance, regards them as a whole and considers the paths to improve sustainability performance. Second, this paper focuses on the complex relationship among SOM, enterprise costs and sustainability performance and reveals different sustainability performance improvement paths and dynamic impact processes, thereby expanding and deepening previous research on sustainability on the subject. These contributions lead to a better understanding of the driving forces and realization path for green manufacturing firms' sustainability performance from an integrated static and dynamic perspective.

The purpose of this study is to propose a precise and standardized strategy for numerically simulating vehicle aerodynamics.

Error sources in computational fluid dynamics were analyzed. Additionally, controllable experiential and discretization errors, which significantly influence the calculated results, are expounded upon. Considering the airflow mechanism around a vehicle, the computational efficiency and accuracy of each solution strategy were compared and analyzed through numerous computational cases. Finally, the most suitable numerical strategy, including the turbulence model, simplified vehicle model, calculation domain, boundary conditions, grids and discretization scheme, was identified. Two simplified vehicle models were introduced, and relevant wind tunnel tests were performed to validate the selected strategy.

Errors in vehicle computational aerodynamics mainly stem from the unreasonable simplification of the vehicle model, calculation domain, definite solution conditions, grid strategy and discretization schemes. Using the proposed standardized numerical strategy, the simulated steady and transient aerodynamic characteristics agreed well with the experimental results.

Building upon the modified Low-Reynolds Number k-e model and Scale Adaptive Simulation model, to the best of the authors’ knowledge, a precise and standardized numerical simulation strategy for vehicle aerodynamics is proposed for the first time, which can be integrated into vehicle research and design.

This study focuses on (re-)introducing computer simulation as a part of the research paradigm. Simulation is a widely applied research method in supply chain and operations management. However, leading journals, such as the International Journal of Operations and Production Management, have often been reluctant to accept simulation studies. This study provides guidelines on how to conduct simulation research that advances theory, is relevant, and matters.

This study pooled the viewpoints of the editorial team of the International Journal of Operations and Production Management and authors of simulation studies. The authors debated their views and outlined why simulation is important and what a compelling simulation should look like.

There is an increasing importance of considering uncertainty, an increasing interest in dynamic phenomena, such as the transient response(s) to disruptions, and an increasing need to consider complementary outcomes, such as sustainability, which many researchers believe can be tackled by big data and modern analytical tools. But building, elaborating, and testing theory by purposeful experimentation is the strength of computer simulation. The authors therefore argue that simulation should play an important role in supply chain and operations management research, but for this, it also has to evolve away from simply generating and analyzing data. Four types of simulation research with much promise are outlined: empirical grounded simulation, simulation that establishes causality, simulation that supplements machine learning, artificial intelligence and analytics and simulation for sensitive environments.

This study identifies reasons why simulation is important for understanding and responding to today's business and societal challenges, it provides some guidance on how to design good simulation studies in this context and it links simulation to empirical research and theory going beyond multimethod studies.

This study aims to find a dynamic model in an effort to optimize tourism performance in ecotourism destinations. The model structure is built based on competitive performance in geographic areas and the application of ecotourism elements that are integrated with big data innovation through artificial intelligence technology.

Data analysis is performed through dynamic system modeling. Simulations are carried out in three models: First, existing simulation models. Second, Scenario 1 is carried out by utilizing a causal loop through innovation of big data-based artificial intelligence technology to ecotourism elements. Third, Scenario 2 is carried out by utilizing a causal loop through big data-based artificial intelligence technology on aspects of ecotourism elements and destination competitiveness.

This study provides empirical insight into the competitiveness performance of destinations and the performance of implementing ecotourism elements if integrated with big data innovations that will be able to massively demonstrate the growth of sustainable tourism performance.

This study does not use a primary database, but uses secondary data from official sources that can be accessed by the public.

The paper includes implications for the development of intelligent technology based on big data and also requires policy innovation.

Sustainable tourism development.

This study finds the expansion of new theory competitiveness of ecotourism destinations.

Metro stations have become a crucial aspect of urban rail transportation, integrating facilities, equipment and pedestrians. Impractical physical layout designs and pedestrian psychology impact the effectiveness of an evacuation during a metro fire. Prior research on emergency evacuation has overlooked the complexity of metro stations and failed to adequately consider the physical heterogeneity of stations and pedestrian psychology. Therefore, this study aims to develop a comprehensive evacuation optimization strategy for metro stations by applying the concept of design for safety (DFS) to an emergency evacuation. This approach offers novel insights into the management of complex systems in metro stations during emergencies.

Physical and social factors affecting evacuations are identified. Moreover, the social force model (SFM) is modified by combining the fire dynamics model (FDM) and considering pedestrians' impatience and panic psychology. Based on the Nanjing South Metro Station, a multiagent-based simulation (MABS) model is developed. Finally, based on DFS, optimization strategies for metro stations are suggested.

The most effective evacuation occurs when the width of the stairs is 3 meters and the transfer corridor is 14 meters. Additionally, a luggage disposal area should be set up. The exit strategy of the fewest evacuees is better than the nearest-exit strategy, and the staff in the metro station should guide pedestrians correctly.

Previous studies rarely consider metro stations as sociotechnical systems or apply DFS to proactively reduce evacuation risks. This study provides a new perspective on the evacuation framework of metro stations, which can guide the designers and managers of metro stations.

Modern subway transportation systems need to satisfy increasing safety demands to rapidly evacuate passengers under hazardous emergency circumstances, such as fires, accidents or terrorist attacks, to reduce passenger injuries or life losses. The emergency evacuation capacity (EEC) of a subway station needs to be revised timely, in case passenger demand increases or the evacuation route changes in the future. However, traditional ways of estimating EEC, e.g. fire drills are time- and resource-consuming and are difficult to revise from time to time. The purpose of this study is to establish an intuitive modelling approach to increase the EEC of subway stations in a stepwised manner.

This study develops an approach to combine agent-based evacuation modelling and building information modelling (BIM) technology to estimate the total evacuation time of a subway station.

Evacuation time can be saved (33% in the studied case) from iterative improvements including stopping escalators running against the evacuation flow and modifying the geometry around escalator exits. Such iterative improvements rely on integrating agent-based modelling and BIM.

The agent-based model can provide a more realistic simulation of intelligent individual movements under emergency circumstances and provides precise feedback on locations of evacuation bottlenecks. This study also examined the effectiveness of two rounds of stepwise improvements in terms of operation or design to increase the EEC of the station.

The purpose of this paper is to conduct a comprehensive study on building, fire and evacuation, so as to effectively improve the efficiency of building fire evacuation and the management level of fire evacuation site. Make up for the difficulties of BIM technology in effectively connecting building information and fire data.

First, this paper establishes a fire model and an evacuation model based on BIM information. Then, the safety index (SI) is introduced as a comprehensive index, and the IRI is established by integrating the SI function to evaluate the safety of evacuation routes. Based on these two indices, the IRI-based fire evacuation model is established.

This study offers an Improved Risk Index (IRI)-based fire evacuation model, which may achieve effective evacuation in fire scenes. And the model is verified by taking the fire evacuation of a shopping center building as an example.

This paper proposes a fire evacuation principle based on IRI, so that the relevant personnel can comprehensively consider the fire factors and evacuation factors to achieve the optimization of building design, thereby improving the fire safety of buildings.