Search results
1 – 10 of 28Pramod Raj Regmi, Edwin van Teijlingen and Sanjeev Raj Neupane
It is widely believed that transgender individuals in Nepal inject silicone for face and body manipulation, a phenomenon thought to be common among transgender individuals…
Abstract
Purpose
It is widely believed that transgender individuals in Nepal inject silicone for face and body manipulation, a phenomenon thought to be common among transgender individuals globally. Therefore, this qualitative study conducted in Nepal explored: (1) awareness of silicone use and sources of information; (2) reasons for using silicone; (3) notion of cost and quality of these procedures; (4) reported negative aspects, including side effects and (5) health seeking behaviors of Nepali transgender women.
Design/methodology/approach
The authors carried out eight focus group discussions (FGDs) with transgender women at four different districts of Nepal, five in the capital Kathmandu and three in different rural areas. We also interviewed three transgender women who preferred not to participate in the FGD but were happy to be interviewed separately. Similarly, six interviews with stakeholders working for sexual and gender minority populations were also conducted.
Findings
Most FGD participants were young (mean age 23.06 ± 3.9 years) and the majority (55%; n = 34) completed grade six to high school level. Peer networks of transgender people and the Internet were the more popular sources of information about silicone. The decision to use silicone was largely influenced by the desire to look beautiful and more feminine. Often they appear not to follow the recommended procedures for silicone use. Their health seeking behavior regarding side effects or complications of these procedures was very poor.
Originality/value
Findings reflect that targeted interventions aimed at transgender individuals should educate them on the use of silicone, as well as explore safe and affordable approaches to meet gender-related appearance needs of Nepali transgender people.
Details
Keywords
Guillermo Guerrero-Vacas, Jaime Gómez-Castillo and Oscar Rodríguez-Alabanda
Polyurethane (PUR) foam parts are traditionally manufactured using metallic molds, an unsuitable approach for prototyping purposes. Thus, rapid tooling of disposable molds using…
Abstract
Purpose
Polyurethane (PUR) foam parts are traditionally manufactured using metallic molds, an unsuitable approach for prototyping purposes. Thus, rapid tooling of disposable molds using fused filament fabrication (FFF) with polylactic acid (PLA) and glycol-modified polyethylene terephthalate (PETG) is proposed as an economical, simpler and faster solution compared to traditional metallic molds or three-dimensional (3D) printing with other difficult-to-print thermoplastics, which are prone to shrinkage and delamination (acrylonitrile butadiene styrene, polypropilene-PP) or high-cost due to both material and printing equipment expenses (PEEK, polyamides or polycarbonate-PC). The purpose of this study has been to evaluate the ease of release of PUR foam on these materials in combination with release agents to facilitate the mulding/demoulding process.
Design/methodology/approach
PETG, PLA and hardenable polylactic acid (PLA 3D870) have been evaluated as mold materials in combination with aqueous and solvent-based release agents within a full design of experiments by three consecutive molding/demolding cycles.
Findings
PLA 3D870 has shown the best demoldability. A mold expressly designed to manufacture a foam cushion has been printed and the prototyping has been successfully achieved. The demolding of the part has been easier using a solvent-based release agent, meanwhile the quality has been better when using a water-based one.
Originality/value
The combination of PLA 3D870 and FFF, along with solvent-free water-based release agents, presents a compelling low-cost and eco-friendly alternative to traditional metallic molds and other 3D printing thermoplastics. This innovative approach serves as a viable option for rapid tooling in PUR foam molding.
Details
Keywords
Gabriel Dämmer, Hartmut Bauer, Rüdiger Neumann and Zoltan Major
This study aims to investigate the suitability of a multi-step prototyping strategy for producing pneumatic rotary vane actuators (RVAs) for the development of lightweight robots…
Abstract
Purpose
This study aims to investigate the suitability of a multi-step prototyping strategy for producing pneumatic rotary vane actuators (RVAs) for the development of lightweight robots and actuation systems.
Design/methodology/approach
RVAs typically have cast aluminum housings and injection-molded seals that consist of hard thermoplastic cores and soft elastomeric overmolds. Using a combination of additive manufacturing (AM), computer numerical control (CNC) machining and elastomer molding, a conventionally manufactured standard RVA was replicated. The standard housing design was modified, and polymeric replicas were obtained by selective laser sintering (SLS) or PolyJet (PJ) printing and subsequent CNC milling. Using laser-sintered molds, actuator seals were replicated by overmolding laser-sintered polyamide cores with silicone (SIL) and polyurethane (PU) elastomers. The replica RVAs were subjected to a series of leakage, friction and durability experiments.
Findings
The AM-based prototyping strategy described is suitable for producing functional and reliable RVAs for research and product development. In a representative durability experiment, the RVAs in this study endured between 40,000 and 1,000,000 load cycles. Frictional torques were around 0.5 Nm, which is 10% of the theoretical torque at 6 bar and comparable to that of the standard RVA. Models and parameters are provided for describing the velocity-dependent frictional torque. Leakage experiments at 10,000 load cycles and 6 bar differential pressure showed that PJ housings exhibit lower leakage values (6.8 L/min) than laser-sintered housings (15.2 L/min), and PU seals exhibit lower values (8.0 l/min) than SIL seals (14.0 L/min). Combining PU seals with PJ housings led to an initial leakage of 0.4 L/min, which increased to only 1.2 L/min after 10,000 load cycles. Overall, the PU material used was more difficult to process but also more abrasion- and tear-resistant than the SIL elastomer.
Research limitations/implications
More work is needed to understand individual cause–effect relationships between specific design features and system behavior.
Originality/value
To date, pneumatic RVAs have been manufactured by large-scale production technologies. The absence of suitable prototyping strategies has limited the available range to fixed sizes and has thus complicated the use of RVAs in research and product development. This paper proves that functional pneumatic RVAs can be produced by using more accessible manufacturing technologies and provides the tools for prototyping of application-specific RVAs.
Details
Keywords