Search results

This paper aims to study the fluid flow and heat transfer within the Casson nanofluid confined between disk and cone both rotating with distinct velocities. For a comprehensive investigation, two distinct nano-size particles, namely, silicon dioxide and silicon carbide, are submerged in ethanol taken as the base fluid.

This paper explores the disk and cone contraption mostly encountered for viscosity measurement in various industrial applications such as lubrication industry, hydraulic brakes, pharmaceutical industry, petroleum and gas industry and chemical industry.

It is worth mentioning here that the radially varying temperature profile at the disk surface is taken into the account. The effect of prominent emerging parameters on velocity fields and temperature distribution are studied graphically, while bar graphs are drawn to examine the physical quantities of industrial interest such as surface drag force and heat transfer rate at disk and cone.

To the best of the authors’ knowledge, no study in literature exists that discusses the thermal enhancement of nano-fluidic transport confined between disk and cone both rotating with distinct angular velocities with heat transfer.

The aim of this study is to make a contribution towards reducing the deflections of silicon wafers. The deformation of silicon wafers used in the manufacture of electronic micro-components is one of the most common problems encountered by industrialists during manufacturing. Stack warping is typically produced during the process of depositing thin layers on a substrate. This is due to the thermal-mechanical stresses caused by the difference between the thermal expansion coefficients of the materials. Reducing wafer deformation is essential to increase reliability and improve quality. In this paper, the authors propose an approach based on minimal geometrical modifications to reduce the deformation of a silicon wafer coated with two thin layers. Numerical finite element models have been developed to evaluate the impact of geometrical modifications on warping amplitude. Finite element models have been validated compared with experimental models. The results obtained are encouraging and clearly show a considerable reduction in wafer deformation.

Reducing wafer deformation is essential to increase reliability and improve quality. In this paper, the authors propose an approach based on minimal geometrical modifications to reduce the deformation of a silicon wafer coated with two thin layers. Numerical finite element models have been developed to evaluate the impact of geometrical modifications on warping amplitude. Finite element models have been validated compared with experimental models.

The results obtained are encouraging and clearly show a considerable reduction in wafer deformation.

This paper describes the influence of geometric modification on wafer deformation. The work show also the cruciality of stress reduction in the purpose to obtain less wafer deformation.

Preparing CrAlN coatings on the surface of silicon nitride bearings can improve their service life in oil-free lubrication. This paper aims to match the optimal process parameters for preparing CrAlN coatings on silicon nitride surfaces, and reveal the microscopic mechanism of process parameter influence on coating wear resistance.

This study used molecular dynamics to analyze how process parameters affected the nucleation density, micromorphology, densification and internal stress of CrAlN coatings. An orthogonal test method was used to examine how deposition time, substrate temperature, nitrogen-argon flow rate and sputtering power impacted the wear resistance of CrAlN coatings under dry friction conditions.

Nucleation density, micromorphology, densification and internal stress have a significant influence on the surface morphology and wear resistance of CrAlN coatings. The process parameters for better wear resistance of the CrAlN coatings were at a deposition time of 120 min, a substrate temperature of 573 K, a nitrogen-argon flow rate of 1:1 and a sputtering power of 160 W.

Simulation analysis and experimental results of this paper can provide data to assist in setting process parameters for applying CrAlN coatings to silicon nitride bearings.

Solar cells could make textile-based wearable systems energy independent without the need for battery replacement or recharging; however, their laundry resistance, which is prerequisite for the product acceptance of e-textiles, has been rarely examined. This paper aims to report a systematic study of the laundry durability of solar cells embedded in textiles.

This research included small commercial monocrystalline silicon solar cells which were encapsulated with functional synthetic textile materials using an industrially relevant textile lamination process and found them to reliably endure laundry washing (ISO 6330:2012). The energy harvesting capability of eight textile laminated solar cells was measured after 10–50 cycles of laundry at 40 °C and compared with light transmittance spectroscopy and visual inspection.

Five of the eight textile solar cell samples fully maintained their efficiency over the 50 laundry cycles, whereas the other three showed a 20%–27% decrease. The cells did not cause any visual damage to the fabric. The result indicates that the textile encapsulated solar cell module provides sufficient protection for the solar cells against water, washing agents and mechanical stress to endure repetitive domestic laundry.

This study used rigid monocrystalline silicon solar cells. Flexible amorphous silicon cells were excluded because of low durability in preliminary tests. Other types of solar cells were not tested.

A review of literature reveals the tendency of researchers to avoid standardized textile washing resistance testing. This study removes the most critical obstacle of textile integrated solar energy harvesting, the washing resistance.

By investigating the thermal-mechanical interaction between the through silicon via (TSV) and the Cu pad, this study aimed to determine the effect of electroplating defects on the upper surface protrusion and internal stress distribution of the TSV at various temperatures and to provide guidelines for the positioning of TSVs and the optimization of the electroplating process.

A simplified model that consisted of a TSV (100 µm in diameter and 300 µm in height), a covering Cu pad (2 µm thick) and an internal drop-like electroplating defect (which had various dimensions and locations) was developed. The surface overall deformation and stress distribution of these models under various thermal conditions were analyzed and compared.

The Cu pad could barely suppress the upper surface protrusion of the TSV if the temperature was below 250 ?. Interfacial delamination started at the collar of the TSV at about 250 ? and became increasingly pronounced at higher temperatures. The electroplating defect constantly experienced the highest level of strain and stress during the temperature increase, despite its geometry or location. But as its radius expanded or its distance to the upper surface increased, the overall deformation of the upper surface and the stress concentration at the collar of the TSV showed a downward trend.

Previous studies have not examined the influence of the electroplating void on the thermal behavior of the TSV. However, with the proposed methodology, the strain and stress distribution of the TSV under different conditions in terms of temperature, dimension and location of the electroplating void were thoroughly investigated, which might be beneficial to the positioning of TSVs and the optimization of the electroplating process.

The purpose of this paper is to design and simulate a piezoelectric micropump using microelectromechanical systems technology for drug delivery applications.

Two piezoelectric actuators are used to actuate and bend the diaphragms in the proposed structure. In this micropump, the liquid flow is rectified by two silicon check valves.

The use of two piezoelectric transducer (PZT) actuators in the parallel mod not only reduces dead volume but also increases stroke volume as well. In addition to increasing the flow rate, this phenomenon enhances the operation of the micropump to have self-priming as smoothly as possible.

This actuating method results in a 22% increase in flow rate and compression ratio, as well as a 15% reduction in function voltage. The fluid-solid interaction is simulated using COMSOL Multiphysics 5.3a.

The purpose of this study is to investigate the crevice corrosion behavior and mechanism of laser additive manufacturing (LAM) nickel-based alloy under wedge-shaped crevice.

First, the opening size of the wedge-shaped crevice was designed to 0.1, 0.3 and 0.5 mm by controlling the thickness of silicon rubber and the double-side adhesive tape. Then, one side of the glass sheet was stuck on the silicon strip and keep the electrodes of Rows 1 and 2 outside the crevice as a reference, and the opposite side was stuck to the wire beam electrode by silica gel.

The current density with a maximum value of 5.7 × 10⁻⁶ A/cm² was observed at the crevice opening of 0.5 mm, while the lowest value of 9.2 × 10⁻⁷ A/cm² was found at the crevice opening of 0.1 mm. In addition, the corrosion resistance at the inside of the crevice is higher than that at the outside and the middle of the crevice. It means that the internal width of the wedge-shaped crevice tends toward 0, which hinders the migration of ions in the corrosive medium. The generation of corrosive products further reduce the crevice size to cause the inhibition of corrosion at the inside of the crevice as well.

The multilayer and multipath LAM component is prepared to show the complex microstructure, which made the corrosion behavior and mechanism at wedge-shaped crevice nondeterminacy.

In early 2014, recent Stanford University graduate Tyler Shultz was in a quandary. He had been working at Theranos, a blood-diagnostic company founded by Elizabeth Holmes, a Stanford-dropout wunderkind, for almost a year. Shultz had learned enough about the company to realize that its practices and the efficacy of its much-touted finger-prick blood-testing technology were questionable and that the company was going to great lengths to hide this fact from the public and from regulators.

Theranos and Holmes were Silicon Valley darlings, enjoying positive press and lavish attention from potential investors and technology titans alike. Just as companies like PayPal had revolutionized the stagnant payments industry and Uber had upended the for-hire transportation sector, Theranos had been positioned as the latest technology firm to substantially disrupt yet another mature sector: the medical laboratory business. By the start of 2014, the company had raised more than $400 million in funding, and had an estimated market valuation of $9 billion.

Shultz's situation was exacerbated by the fact that his grandfather, the highly respected former US Secretary of State George Shultz, was on the Theranos board and was one of Elizabeth Holmes's biggest supporters.

But Tyler Shultz worried about the customers he was convinced were receiving highly unreliable and often inaccurate blood-test results. With so much at stake, Shultz wondered how he should proceed. Should he raise his concerns with the firm's investors? Blow the whistle externally? Report to industry regulators? Go away quietly?

This case and its subsequent four brief follow-up cases are based largely on interviews with Tyler Shultz, and outline the dilemma he faced and the various steps he would take both to extricate himself from his unsavory position and let the public know the full extent of the deception at Theranos.

Five optional handouts are available to instructors to further discussion after the case has been debriefed. The handouts serve as additional decision points for the students if your class time permits.

This study aims to evaluate the thermal performance of sodium alginate (SA) aerogel attached to nano SiO₂ and its radiative cooling effect on firefighting clothing without environmental pollution.

SA/SiO₂ aerogel with refractory heat insulation and enhanced radiative cooling performance was fabricated by freeze-drying method, which can be used in firefighting clothing. The microstructure, chemical composition, thermal stability, and thermal emissivity were analyzed using Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analyzer and infrared emissivity measurement instrument. The radiative cooling effect of aerogel was studied using thermal infrared imager and thermocouple.

When the addition of SiO₂ is 25% of SA, the prepared aerogel has excellent heat insulation and a high radiative cooling effect. Under a clear sky, the temperature of SA/SiO₂ aerogel is 9.4°C lower than that of pure SA aerogel and 22.1°C lower than that of the simulated environment. In addition, aerogel has more exceptional heat insulation effect than other common fabrics in the heat insulation performance test.

SA/SiO₂ aerogel has passive radiative cooling function, which can efficaciously economize global energy, and it is paramount to environment-friendly cooling.

This method could pave the way for high-performance cooling materials designed for firefighting clothing to keep maintain the wearing comfort of firefighters.

SA/SiO₂ aerogel used in firefighting clothing can release heat to the low-temperature outer space in the form of thermal radiation to achieve its own cooling purpose, without additional energy supply.

This chapter provides preliminary evidence to show that financial accounting students would use generative artificial intelligence (AI) tools to improve their learning if given the opportunity to do so by their instructors. Most students who completed the exercises we used in the study did so diligently and modified their answers after using a generative AI tool in a manner that suggests beneficial effects. It appears that the more prior knowledge a student had about the subject matter, the more beneficial was the experience. Pitfalls still exist, however. For example, students without knowledge of the subject matter struggled with crafting queries and judging the efficacy of their answers. Moreover, although a minority, some students tended to duplicate their original answers without utilizing the responses generated by the generative AI tool. Additionally, certain students merely copied the answers generated by the AI tool without providing any additional critique or analysis. Implications for teaching and learning and opportunities for future research are discussed.