Search results

1 – 10 of over 4000
Article
Publication date: 4 November 2014

Xin Wang, Wei Bing Hu and Zhao Bo Meng

The purpose of this paper is to establish the damage alarming indexes for ancient wood structures and study the damage sensitivity and noise robustness of these indexes under…

Abstract

Purpose

The purpose of this paper is to establish the damage alarming indexes for ancient wood structures and study the damage sensitivity and noise robustness of these indexes under random excitation.

Design/methodology/approach

Xi’an Bell Tower is taken as a case in this paper to simulate the damage of ancient wood structures through finite element (FE) simulation and determine the satisfactory damage alarming indexes with wavelet packet energy spectrum.

Findings

The results of this paper show that: 1) the damage alarming indexes can effectively identify the damage of ancient wood structures, each index with a different damage sensitivity; 2) the energy ratio deviation is greater than the energy ratio variance and is close to the maximum variation of energy ratio; 3) the energy ratio deviation has a better alarming effect than the energy ratio variance during the initial period of the damage. With the accumulation of the damage, the energy ratio variance outperforms the energy ratio deviation; 4) the sensitivity of the energy ratio deviation and variance varies from positions, changing from the highest to lowest at the mortise-and-tenon joints, the beam mid-span and the plinth; 5) if signal to noise ratio (SNR) is 40db or larger, the indexes can accurately identify the damage of ancient wood structures. As SNR increases, the indexes will have an increasingly higher sensitivity and certain ability to resist noise.

Research limitations/implications

The FE model is simpiy, it does not completely reflect Xi’an Bell Tower.

Practical implications

It will provide a theoretical basis for the damage alarming of Xi’an Bell Tower.

Social implications

It makes structural health monitoring through structural vibration response under ambient excitation a new research field in damage detection as well as a positive way of ancient architecture protection.

Originality/value

This paper studies the damage alarming effect on ancient wood structures from different wavelet functions and wavelet packet decomposition levels. To study the effect under white noise environment, this paper adds Gaussian white noise with a SNR of 10, 20, 30, 40 and 50 db to the acceleration response signal of intact structure and damaged structure.

Details

Multidiscipline Modeling in Materials and Structures, vol. 10 no. 4
Type: Research Article
ISSN: 1573-6105

Keywords

Article
Publication date: 29 October 2021

Sai Bharadwaj B. and Sumanth Kumar Chennupati

The purpose of this manuscript is to detect heart fault using Electrocardiogram. Mutually low and high frequency noises such as electromyography (EMG) and power line interference…

Abstract

Purpose

The purpose of this manuscript is to detect heart fault using Electrocardiogram. Mutually low and high frequency noises such as electromyography (EMG) and power line interference (PLI) degrades the performance of ECG signals.

Design/methodology/approach

The ECG record depicts the procedural electrical movement of the heart, which is non-invasive foot age obtained by placing surface electrodes on designated locations of the patient’s skin. The main concept of this manuscript is to present a novel filtering method to cancel the unwanted noises in ECG signal. Here, intrinsic time scale decomposition (ITD) is introduced to suppress the effect of PLI from ECG signals.

Findings

In the existing ITD, the gain control parameter is a constant value; however, in this paper it is an adaptive feature that varies according to certain constraints. Simulation outcomes show that the proposed method effectively reduces the effect of PLI and quantitatively express the effectiveness with different evaluation metrics.

Originality/value

The results found by the proposed method are compared with Fourier decomposition technique and eigen value decomposition methods (EDM) to validate the effectiveness of the proposed method.

Details

Journal of Engineering, Design and Technology , vol. 21 no. 6
Type: Research Article
ISSN: 1726-0531

Keywords

Article
Publication date: 16 October 2009

Junguo Wang, Jianzhong Zhou and Bing Peng

The purpose of this paper is to detect the periodic signal under strong noise background, and estimate its amplitude/phase.

1012

Abstract

Purpose

The purpose of this paper is to detect the periodic signal under strong noise background, and estimate its amplitude/phase.

Design/methodology/approach

Melnikov method is adopted as calculating the threshold value when chaos occurs, and the detected signal is taken as a system parameter. The system's output state is changed if the parameter has a slight change near the threshold. Meantime, the phase of system's output is recognized to judge whether the output state changes, and the signal parameter is estimated according to the necessary condition.

Findings

A small periodic signal in noise can be detected by Duffing oscillator via a transition from chaotic motion to periodic motion.

Research limitations/implications

The paper shows how to calculate the amplitude/phase in low signal‐to‐noise ratios.

Practical implications

The Duffing system is sensitive to the weak periodic signal and has definite immunity to noise, so it is easy to construct a system composed of many oscillators that could process complex signals, even though the environmental noise is intense.

Originality/value

This paper presents a nonlinear method for detecting and extracting the weak signal.

Details

Kybernetes, vol. 38 no. 10
Type: Research Article
ISSN: 0368-492X

Keywords

Article
Publication date: 22 June 2021

Bingbing Qi and Dunge Liu

The existing dimensionality reduction algorithms suffer serious performance degradation under low signal-to-noise ratio (SNR) owing to the presence of noise. To address these…

Abstract

Purpose

The existing dimensionality reduction algorithms suffer serious performance degradation under low signal-to-noise ratio (SNR) owing to the presence of noise. To address these problems, an enhanced spatial smoothing scheme is proposed that exploits the subarray time-space correlation matrices to reconstruct the data matrix to overcome this weakness. This method uses the strong correlation of signal and the weak correlation of noise in time and space domains, which improves the noise suppression ability.

Design/methodology/approach

In this paper, an enhanced spatial smoothing method is proposed. By using the strong correlation of signal and the weak correlation of noise, the time-space smoothed array covariance matrix based on the subarray time-space correlation matrices is constructed to improve the noise suppression ability. Compared with the existing Toeplitz matrix reconstruction and spatial smoothing methods, the proposed method improves the DOA estimation performance at low SNR.

Findings

Theoretical analysis and simulation results show that compared with the existing dimensionality reduction processing algorithms, the proposed method improves the DOA estimation performance in cases with a low SNR. Furthermore, in cases where the DOAs between the coherent sources are closely spaced and the snapshot number is low, our proposed method significantly improves the performance of the DOA estimation performance.

Originality/value

The proposed method improves the DOA estimation performance at low SNR. In particular, for the cases with a low SNR, the proposed method provides a better RMSE. The convergence of the proposed method is also faster than other methods for the low number of snapshots. Our analysis also confirms that in cases where the DOAs between the coherent sources are closely spaced, the proposed method achieves a much higher angular resolution than that of the other methods.

Details

Engineering Computations, vol. 39 no. 2
Type: Research Article
ISSN: 0264-4401

Keywords

Article
Publication date: 1 June 2021

Wang Jianhong

The purpose of this paper considers optimal input signal design for flutter model parameters identification, as input signal is the first step during the whole identification…

Abstract

Purpose

The purpose of this paper considers optimal input signal design for flutter model parameters identification, as input signal is the first step during the whole identification process. According to the constructed flutter stochastic model with observed noises, separable least squares identification and set membership identification are proposed to identify those unknown model parameters for statistical noise and unknown but bounded noise, respectively. The common trace operation with respect to the asymptotic variance matrix is minimized to solve the power spectral for the optimal input signal in the framework of statistical noise. Moreover, for the unknown bout bounded noise, the radius of information, corresponding to the established parameter uncertainty interval, is minimized to give the optimal input signal.

Design/methodology/approach

First, model identification for aircraft flutter is reviewed as one problem of parameter identification and this aircraft flutter model corresponds to one stochastic model, whose input signal and output are corrupted by external noises. Second, for aircraft flutter statistical model with statistical noise, separable least squares identification is proposed to identify the unknown model parameters, then the optimal input signal is designed to satisfy one given performance function. Third, for aircraft flutter model with unknown but bounded noise, set membership identification is proposed to solve the parameter set for each unknown model parameter. Then, the optimal input signal is designed by applying the idea of the radius of information with unknown but bounded noise.

Findings

This aircraft flutter model corresponds to one stochastic model, whose input signal and output are corrupted by external noises. Then identification strategy and optimal input signal design are studied for aircraft flutter model parameter identification with statistical noise and unknown but bounded noise, respectively.

Originality/value

To the best knowledge of the authors, this problem of the model parameter identification for aircraft flutter was proposed by their previous work, and they proposed many identification strategies to identify these model parameters. This paper proposes two novel identification strategies and opens a new subject about optimal input signal design for statistical noise and unknown noise, respectively.

Details

Aircraft Engineering and Aerospace Technology, vol. 93 no. 10
Type: Research Article
ISSN: 1748-8842

Keywords

Article
Publication date: 8 June 2020

Vandana Bagde and Dethe C. G

A recent innovative technology used in wireless communication is recognized as multiple input multiple output (MIMO) communication system and became popular for quicker data…

Abstract

Purpose

A recent innovative technology used in wireless communication is recognized as multiple input multiple output (MIMO) communication system and became popular for quicker data transmission speed. This technology is being examined and implemented for the latest broadband wireless connectivity networks. Though high-capacity wireless channel is identified, there is still requirement of better techniques to get increased data transmission speed with acceptable reliability. There are two types of systems comprising of multi-antennas placed at transmitting and receiving sides, of which first is diversity technique and another is spatial multiplexing method. By making use of these diversity techniques, the reliability of transmitting signal can be improved. The fundamental method of the diversity is to transform wireless channel such as Rayleigh fading into steady additive white Gaussian noise (AWGN) channel which is devoid of any disastrous fading of the signal. The maximum transmission speed that can be achieved by spatial multiplexing methods is nearly equal to channel capacity of MIMO. Conversely, for diversity methods, the maximum speed of broadcasting is much lower than channel capacity of MIMO. With the advent of space–time block coding (STBC) antenna diversity technique, higher-speed data transmission is achievable for spatially multiplexed multiple input multiple output (SM-MIMO) system. At the receiving end, detection of the signal is a complex task for system which exhibits SM-MIMO. Additionally, a link modification method is implemented to decide appropriate coding and modulation scheme such as space diversity technique STBC to use two-way radio resources efficiently. The proposed work attempts to improve detection of signal at receiving end by employing STBC diversity technique for linear detection methods such as zero forcing (ZF), minimum mean square error (MMSE), ordered successive interference cancellation (OSIC) and maximum likelihood detection (MLD). The performance of MLD has been found to be better than other detection techniques.

Design/methodology/approach

Alamouti's STBC uses two transmit antennas regardless of the number of receiver antennas. The encoding and decoding operation of STBC is shown in the earlier cited diagram. In the following matrix, the rows of each coding scheme represent a different time instant, while the columns represent the transmitted symbols through each different antenna. In this case, the first and second rows represent the transmission at the first and second time instant, respectively. At a time t, the symbol s1 and symbol s2 are transmitted from antenna 1 and antenna 2, respectively. Assuming that each symbol has duration T, then at time t + T, the symbols –s2* and s1*, where (.)* denotes the complex conjugate, are transmitted from antenna 1 and antenna 2, respectively. Case of one receiver antenna: The reception and decoding of the signal depend on the number of receiver antennas available. For the case of one receiver antenna, the received signals are received at antenna 1 , hij is the channel transfer function from the jth transmit antenna and the ith receiver antenna, n1 is a complex random variable representing noise at antenna 1 and x (k) denotes x at time instant k ( at time t + (k – 1)T.

Findings

The results obtained for maximal ratio combining (MRC) with 1 × 4 scheme show that the BER curve drops to 10–4 for signal-to-noise (SNR) ratio of 10 dB, whereas for MRC 1 × 2 scheme, the BER drops down to 10–5 for SNR of 20 dB. Results obtained in Table 1 show that when STBC is employed for MRC with 1 × 2 scheme (one antenna at transmitter node and two antennas at receiver node), BER curve comes down to 0.0076 for Eb/N0 of 12. Similarly, when MRC with 1 × 4 antenna scheme is implemented, BER drops down to 0 for Eb/N0 of 12. Thus, it can be concluded from the obtained graph that the performance of MRC with STBC gives improved results. When STBC technique is used with 3 × 4 scheme, at SNR of 10 dB, BER comes nearer to 10–6 (figure 7.3). It can be concluded from the analytics observed between AWGN and Rayleigh fading channel that for AWGN channel, BER is found to be equal to 0 for SNR value of 13.5 dB, whereas for Rayleigh fading channel, BER is observed nearer to 10–3 for Eb/N0 = 15. Simulation results (in figure 7.2) from the analytics show BER drops to 0 for SNR value of 12 dB.

Research limitations/implications

Optimal design and successful deployment of high-performance wireless networks present a number of technical challenges. These include regulatory limits on useable radio-frequency spectrum and a complex time-varying propagation environment affected by fading and multipath. The effect of multipath fading in wireless systems can be reduced by using antenna diversity. Previous studies show the performance of transmit diversity with narrowband signals using linear equalization, decision feedback equalization, maximum likelihood sequence estimation (MLSE) and spread spectrum signals using a RAKE receiver. The available IC techniques compatible with STBC schemes at transmission require multiple antennas at the receiver. However, if this not a strong constraint at the base station level, it remains a challenge at the handset level due to cost and size limitation. For this reason, SAIC technique, alternative to complex ML multiuser demodulation technique, is still of interest for 4G wireless networks using the MIMO technology and STBC in particular. In a system with characteristics similar to the North American Digital mobile radio standard IS-54 (24.3 K symbols per sec. with an 81 Hz fading rate), adaptive retransmission with time deviation is not practical.

Practical implications

The evaluation of performance in terms of bit error rate and convergence time which estimates that MLD technique outperforms in terms of received SNR and low decoding complexity. MLD technique performs well but when higher number of antennas are used, it requires more computational time and thereby resulting in increased hardware complexity. When MRC scheme is implemented for singe input single output (SISO) system, BER drops down to 10–2 for SNR of 20 dB. Therefore, when MIMO systems are employed for MRC scheme, improved results based on BER versus SNR are obtained and are used for detecting the signal; comparative study based on different techniques is done. Initially ZF detection method is utilized which was then modified to ZF with successive interference cancellation (ZFSIC). When successive interference cancellation scheme is employed for ZFSIC, better performance is observed as compared to the estimation of ML and MMSE. For 2 × 2 scheme with QPSK modulation method, ZFSIC requires more computational time as compared to ZF, MMSE and ML technique. From the obtained results, the conclusion is that ZFSIC gives the improved results as compared to ZF in terms of BER ratio. ZF-based decision statistics can be produced by the detection algorithm for a desired sub-stream from the received vector whichs consist of an interference which occurred from previous transmitted sub-streams. Consequently, a decision on the secondary stream is made and contribution of the noise is regenerated and subtracted from the vector received. With no involvement of interference cancellation, system performance gets reduced but computational cost is saved. While using cancellation, as H is deflated, coefficients of MMSE are recalculated at each iteration. When cancellation is not involved, the computation of MMSE coefficients is done only once, because of H remaining unchanged. For MMSE 4 × 4 BPSK scheme, bit error rate of 10–2 at 30 dB is observed. In general, the most thorough procedure of the detection algorithm is the computation of the MMSE coefficients. Complexity arises in the calculation of the MMSE coefficients, when the antennas at the transmitting side are increased. However, while implementing adaptive MMSE receivers on slow channel fading, it is probable to recover the signal with the complications being linear in the antennas of transmitter node. The performance of MMSE and successive interference cancellation of MMSE are observed for 2 × 2 and 4 × 4 BPSK and QPSK modulation schemes. The drawback of MMSE SIC scheme is that the first detected signal observes the noise interference from (NT-1) signals, while signals processed from every antenna later observe less noisy interference as the process of cancellation progresses. This difficulty could be overcome by using OSIC detection method which uses successive ordering of the processed layers in the decreasing power of the signal or by power allocation to the signal transmitted depending on the order of the processing. By using successive scheme, a computation of NT delay stages is desired to bring out the abandoned process. The work also includes comparison of BER with various modulation schemes and number of antennas involved while evaluating the performance. MLD determines the Euclidean distance among the vector signal received and result of all probable transmitted vector signals with the specified channel H and finds the one with the minimum distance. Estimated results show that higher order of the diversity is observed by employing more antennas at both the receiving and transmitting ends. MLD with 8 × 8 binary phase shift keying (BPSK) scheme offers bit error rate near to 10–4 for SNR (16 dB). By using Altamonti space ti.

Social implications

It should come as no surprise that companies everywhere are pushing to get products to market faster. Missing a market window or a design cycle can be a major setback in a competitive environment. It should be equally clear that this pressure is coming at the same time that companies are pushing towards “leaner” organizations that can do more with less. The trends mentioned earlier are not well supported by current test and measurement equipment, given this increasingly high-pressure design environment: in order to measure signals across multiple domains, multiple pieces of measurement equipment are needed, increasing capital or rental expenses. The methods available for making cross-domain, time-correlated measurements are inefficient, reducing engineering efficiency. When only used on occasion, the learning curve to understand how to use equipment for logic analysis, time domain and RF spectrum measurements often requires an operator to re-learn each piece of separate equipment. The equipment needed to measure wide bandwidth, time-varying spectral signals is expensive, again increasing capital or rental expenses. What is needed is a measurement instrument with a common user interface that integrates multiple measurement capabilities into a single cost-effective tool that can efficiently measure signals in the current wide-bandwidth, time-correlated, cross-domain environments. The market of wireless communication using STBCs has large scope of expansion in India. Therefore, the proposed work has techno-commercial potential and the product can be patented. This project shall in turn be helpful for remote areas of the nearby region particularly in Gadchiroli district and Melghat Tiger reserve project of Amravati district, Nagjira and so on where electricity is not available and there is an all the time problem of coverage in getting the network. In some regions where electricity is available, the shortage is such that they cannot use it for peak hours. In such cases, stand-alone space diversity technique, STBC shall help them to meet their requirements in making connection during coverage problem, thereby giving higher data transmission rates with better QOS (quality of service) with least dropped connections. This trend towards wireless everywhere is causing a profound change in the responsibilities of embedded designers as they struggle to incorporate unfamiliar RF technology into their designs. Embedded designers frequently find themselves needing to solve problems without the proper equipment needed to perform the tasks.

Originality/value

Work is original.

Details

International Journal of Intelligent Unmanned Systems, vol. 10 no. 2/3
Type: Research Article
ISSN: 2049-6427

Keywords

Article
Publication date: 9 January 2019

Ping Ma, Hongli Zhang, Wenhui Fan and Cong Wang

Early fault detection of bearing plays an increasingly important role in the operation of rotating machinery. Based on the properties of early fault signal of bearing, this paper…

Abstract

Purpose

Early fault detection of bearing plays an increasingly important role in the operation of rotating machinery. Based on the properties of early fault signal of bearing, this paper aims to describe a novel hybrid early fault detection method of bearings.

Design/methodology/approach

In adaptive variational mode decomposition (AVMD), an adaptive strategy is proposed to select the optimal decomposition level K of variational mode decomposition. Then, a criterion based on envelope entropy is applied to select the optimal intrinsic mode functions (OIMF), which contains most useful fault information. Afterwards, local tangent space alignment (LTSA) is used to denoising of OIMF. The envelope spectrum of the OIMF is used to analyze the fault frequency, thereby detecting the fault. Experiments are conducted in a simulated signal and two experimental vibration signals of bearings to verify the effect of the new method.

Findings

The results show that the proposed method yields a good capability of detecting bearing fault at an early stage. The new method can extract more useful information and can reduce noise, which can provide better detection accuracy compared with the other two methods.

Originality/value

An adaptive strategy based on center frequency is proposed to select the optimal decomposition level of variational mode decomposition. Envelope entropy is used to fault feature selection. Combining the advantage of the AVMD-envelope entropy and LTSA, which suits the nature of the early fault signal. So, the proposed method has better detection accuracy, which provides a good alternative for early fault detection of bearings.

Details

Engineering Computations, vol. 36 no. 2
Type: Research Article
ISSN: 0264-4401

Keywords

Article
Publication date: 6 July 2015

Xinlong Wang and Shuai Song

– The purpose of this paper is to improve the tracking performance of the tracking loops under high dynamic and severe jamming conditions.

Abstract

Purpose

The purpose of this paper is to improve the tracking performance of the tracking loops under high dynamic and severe jamming conditions.

Design/methodology/approach

First, as the two dominant measurement error sources of the tracking loops, the thermal noise jitter and the dynamic stress error are thoroughly analyzed. Second, a scheme of adaptive tracking loops, which could adaptively adjust the order and the bandwidth of tracking loops, is proposed. Third, real-time detections of the vehicle dynamics and the carrier-to-noise density ratio, and the adaptive bandwidth of the carrier loop are presented, respectively. Finally, simulations are operated to validate the excellent tracking performance of the adaptive tracking loops.

Findings

Based on the principle of minimizing the measurement errors, the loop order and bandwidth are adaptively adjusted in the proposed scheme. Thus, the anti-jamming capability and dynamic tracking performance of the tracking loops could be effectively enhanced.

Practical implications

This paper provides further study on the method of improving the tracking capability under complexly applied conditions of high dynamics and severe jamming.

Originality/value

The detections of carrier-to-noise density ratio and vehicle dynamics are used to adaptively adjusting the loop order and bandwidth, which could not only improve the measurement accuracy but also ensure the stable operation of tracking loops.

Details

Aircraft Engineering and Aerospace Technology: An International Journal, vol. 87 no. 4
Type: Research Article
ISSN: 0002-2667

Keywords

Article
Publication date: 1 July 2006

Osama Hunaidi and Alex Wang

To introduce a new, low‐cost and easy‐to‐use leak detection system to help water utilities improve their effectiveness in locating leaks. The paper also presents an overview of…

1494

Abstract

Purpose

To introduce a new, low‐cost and easy‐to‐use leak detection system to help water utilities improve their effectiveness in locating leaks. The paper also presents an overview of leakage management strategies including acoustic and other leak detection techniques.

Design/methodology/approach

The design approach was based on the use personal computers as a platform and enhanced signal processing algorithms. This eliminated the need for a major component of the usual hardware of leak pinpointing correlators which reduced the system's cost; made it easy to use, and improved the effectiveness of locating leaks in all types of pipes.

Findings

Effectiveness of the new leak detection system for pinpointing leaks was demonstrated using real world examples. The system has promising potential for all water utilities, including small and medium‐sized ones and utilities in developing countries.

Practical implications

The leak detection system presented in the paper will help all water utilities, including small and medium‐sized ones and utilities in developing countries, to save water by dramatically improving their effectiveness in locating leaks in all types of pipes.

Originality/value

The paper presents information about a new effective system for locating leaks in water distribution pipes. Effective leak detection tools are needed by water utilities worldwide.

Details

Management of Environmental Quality: An International Journal, vol. 17 no. 4
Type: Research Article
ISSN: 1477-7835

Keywords

Article
Publication date: 27 January 2012

Jinshuai Zhao, Sujin Yang and Liu Xin

The purpose of this paper is to construct a novel grey filter model for image denoising and to solve the problems which exist in the image denoising filter method, in which the…

333

Abstract

Purpose

The purpose of this paper is to construct a novel grey filter model for image denoising and to solve the problems which exist in the image denoising filter method, in which the true intensity value of each noisy pixel cannot be predicted better.

Design/methodology/approach

Based on the definition of stepwise, the defects of traditional grey prediction models are found. A new grey filter model, named grey stepwise prediction model, is proposed. The new filter model for the image denoising is based on each noisy pixel's neighborhoods stepwise, which is the eight pixels around the noisy pixel, to predict its intensity value and to solve the problems which exist in the image denoising filter method.

Findings

The experiment results show that the improved filter model can effectively eliminate image noise, preserve the image's details and edges, increase SNR (signal‐to‐noise ratio) as well as PSNR (peak signal‐to‐noise ratio), reduce MSE (mean square error) and MAE (mean absolute error), and significantly improve the image's visual effect.

Practical implications

The new filter method exposed in the paper can be used to 8‐bit gray‐scale image denoising. The method can also be used to binary image denoising.

Originality/value

The paper succeeds in constructing a novel filter method for image denoding, and it is undoubtedly a new development in image recovery algorithm and grey systems theory.

Details

Grey Systems: Theory and Application, vol. 2 no. 1
Type: Research Article
ISSN: 2043-9377

Keywords

1 – 10 of over 4000