Search results

Cold-formed steel has been used extensively as secondary elements such as purlins and girts in building frames. Purlin is critical to the structure of the roof because it supports the weight of the roof deck and aids to make the entire roof structure more rigid. Furthermore, cold-formed steel purlin is a replacement for wood purlin because steel purlins are light weight and more economical. Hence, the purpose of this study to investigate the effect of opening due to torsion behaviour.

This analysis used cold-formed steel hat purlin with and without openings (WOs) under different opening shape, location and spacing by using finite element LUSAS software.

The finite element results showed that purlin with openings had higher angle of rotation than section WO, with a percentage difference of not more than 6%. When the opening was located at mid-span, the angle of rotation reduced. Angle of rotation increased when the opening spacing increased. Number of openings also affected the torsional behaviour of the purlin. Five opening shapes, which were circle, diamond, C-hexagon, square and elongated circle, were studied. Among all the shapes, purlin with diamond opening was more resistance to torsion.

The use of cold-formed steel section with web openings (rectangular or circular) is a practical solution when it is required to pass service ducts through the structural member. However, the presence of opening gives minor effect on the structural behaviour of cold-formed steel hat purlin.

The circular economy (CE) promotes the recovery of value from waste while also working towards achieving long-term environmentally sustainable goals. The goal of this research is to explore the challenges, opportunities, future scope and green practices that small and medium-sized firms (SMEs) face as they move from the linear economy to the CE.

Based on a structured questionnaire, a survey was conducted with representatives from 163 SMEs in India. The data were analysed using co-variance based structural equation modelling technique.

This research identifies various challenges, including consumer acceptability, worries about awareness, recyclability issues, financial constraints and the absence of a defined management plan for SMEs in adopting the CE. Further, strong management will, innovation, technical up-gradation, training of employees, employee motivation and appropriate guidelines are recognized as essential possibilities for CE implementation.

While there has been some work on CE, no studies have directly compared these efforts with the goal of shifting from a linear economy to a CE. Given the transient nature of many archives, it is critical that the efforts put into them and the opinions of those who work in them be recorded so that communities can benefit from a shared linear economy in making decisions about their own history.

This paper establishes a quality model for automation assembly of range hood impeller based on generalized grey relational degree, it improves the debugging efficiency of the newly developed assembly workstation.

First, spot check the trial production impellers and obtain three indexes that reflect the assembly quality of the impellers. Then, analyze the parameters that affect the assembly quality of the impeller using grey relational analysis (GRA), establish a model for the assembly quality of the range hood impeller based on the generalized grey relational degree and identify the main parameters. After that, analyze the transmission structure of automation assembly workstation, identify the reasons that affect parameters and propose improvement plans. Finally, a trial production is conducted on the automation assembly workstation after adopting the improved plan to verify the quality model of impeller automation assembly.

The research shows that compared to manual assembly, the automation assembly quality of the impeller using GRA model has been improved, shortening the debugging cycle of the newly developed assembly workstation.

The newly developed automation equipment will have some problems in the trial production stage, which often rely on the experience of engineers for debugging. In this paper, the automation assembly quality model of range hood impeller based on GRA is established, which can not only ensure the quality of finished impeller but also shorten the debugging cycle of the equipment. In addition, GRA can be widely used in the commissioning of other automation equipment.

This study has developed a set of impeller automation assembly workstation. The debugging method in the trial production stage is beneficial to shorten the trial production time and improve the economic benefits.

The common language behind vernacular architecture only seems to be maintained in societies that preserve a traditional way of life. Changes in these societies can threaten their cultural heritage, while research may be a tool for its conservation and enhancement. In this paper, the habitat of a Mossi community is therefore studied as a first stage in analysing the possibilities of its maintenance.

After a previous study, data collection from a stay in Baasneere (Burkina Faso) and the analysis of 32 traditional residential units were completed. The research showed some common features which, when compared against the bibliography reviewed, could be defined as characteristic of the traditional architecture of this culture.

The home for a family unit consisted in an enclosure formed by the grouping of adobe constructions around a courtyard. As the family grew so did the compound, in a relationship directly linking the scales of architecture and the levels of kinship. The main daily activities took place in the courtyards while the individual interior spaces were understood as private shelters. Other typologies such as granaries, kitchens, warehouses and sheds were also analysed.

Some features of Mossi architecture already described in the existing bibliography were verified in the Baasneere case studies, showing that this tradition is still preserved. With a multidisciplinary approach, the house was examined not so much from the perspective of construction, but of its cultural configuration.

The purpose of the study is to compare methodologies for mapping a historic building, with image capture by smartphones and drones, using photogrammetric techniques for three-dimensional (3D) modeling of the structure. Processes and products are also analyzed, as well as possibilities for storing and visualizing data for structuring a cadastre of historical and artistic heritage are studied.

For mapping with smartphones, the overlapping of photographs was guaranteed, with data acquisition using three different cameras, on the same date as the aerial survey. The models were made from different combinations of camera use. For storage, a conceptual model based on ISO 19.152:2012 is proposed, which was implemented in the MongoDB, resulting in a database for storage. The visualization was carried out on the Cesium ion platform.

The results indicate that the terrestrial 3D reconstruction using smartphones is an efficient alternative to the historical and artistic cadastre, presenting texture quality superior to the aerial survey in a shorter production time. When dealing with the conceptual model, the LADM (Land Administration Domain Model) standardization guarantees interoperability and facilitates data exchange. In addition, it proved to be flexible for the creation of thematic profiles, supporting their effective storage. The insertion of data in the visualization platform was simple and effective, and it even generated sharing links for visualization of the models.

The study analyses a low-cost method with the use of easily accessible devices, with a combination of methodologies and applied techniques. The data storage and visualization method is also simple and flexible, suitable for application in the cadastre of historical heritage.

Drawing on the social presence theory, this study aims to explore how supplier–customer social media interactions influence supplier observers’ trust in the customers and what mechanisms contribute to variation in trust experience.

A total of 36 semi-structured interviews were conducted with Chinese suppliers using WeChat for business-to-business interactions. Data were analyzed in three steps: open coding, axial coding and selective coding.

Findings reveal that varied trust is based not only on the categories of social presence of interaction – whether social presence is embedded in informative interactions – but also on the perceived selectivity in social presence. Observer suppliers who experience selectivity during social and affective interactions create a perception of hidden information and an unhealthy relationship atmosphere, and report a sense of emotional vulnerability, thus eroding cognitive and affective trust.

The findings contribute new understandings to social presence theory by exploring the social presence of interactions in a supplier–supplier–customer triad and offer valuable insights into business-to-business social media literature by adopting a suppliers’ viewpoint to unpack the mechanisms of how social presence of interaction positively and negatively influences suppliers’ trust and behavioral responses.

This paper showcases how the PAR embedded in posthumanist perspectives enabled us to navigate several complexities in the field through methodological situatedness and pluralism. It also attempts to critically outline the drivers and barriers that shaped our capacities to engage with the PAR.

The Tamil Nadu state in the Bay of Bengal along the southeast coast of India is one of the six regions in the world where severe tropical cyclones originate throughout the year. Storm surges in this region are well known for their destructive potential due to strong winds and heavy rainfall. This paper describes our participatory action research (PAR) journey towards strengthening grassroots action by providing access to safe and affordable housing for cyclone-impacted households (CIHs) in the Villupuram district of Tamil Nadu, India. The PAR was guided by an adaptive innovation model (AIM) that draws inspiration from posthumanism, action research and reflective practice traditions.

The insights from the PAR insist that we must recognise and work with diverse knowledge systems and situated practices to develop meaningful disaster risk reduction (DRR) and climate adaptation strategies. Our approach has to be rooted in the lived experiences of various vulnerable groups, their entanglements with nature and their everyday struggles of interacting with a complex social-ecological system.

This paper is an outcome of a PAR in a cyclone-impacted village in Tamil Nadu, India. The discussions and findings of the paper are original in nature and have not been published elsewhere.

The purpose of this study is to provide an in-depth understanding of the B2B customers’ perspective regarding salespeople’s social media use.

The study adopts a qualitative approach based on semi-structured interviews with 26 key informants performing their job in customer role in various industries.

The authors inductively identify five themes regarding the B2B customers’ perspective of social media use in B2B selling. These themes allow for valuable implications for social selling activities and expected outcomes.

Against a growing body of literature on drivers, best practices and outcomes of social media use by B2B salespeople, less attention has been paid to the customer’s side. The authors extend current research by providing a more complete picture of social selling activities and expected outcomes.

The criteria importance through intercriteria correlation (CRITIC) and range of value (ROV) combined methods were used to determine a single index for all multiple responses.

This paper used cold metal transfer (CMT) and pulse metal-inert gas (MIG) welding processes to study the weld-on-bead geometry of AA2099-T86 alloy. This study used Taguchi's approach to find the optimal setting of the input welding parameters. The welding current, welding speed and contact-tip-to workpiece distance were the input welding parameters for finding the output responses, i.e. weld penetration, dilution and heat input. The L9 orthogonal array of Taguchi's approach was used to find out the optimal setting of the input parameters.

The optimal input welding parameters were determined with combined output responses. The predicted optimum welding input parameters were validated through confirmation tests. Analysis of variance showed that welding speed is the most influential factor in determining the weld bead geometry of the CMT and pulse MIG welding techniques.

The heat input and weld bead geometry are compared in both welding processes. The CMT welding samples show superior defect-free weld beads than pulse MIG welding due to lesser heat input and lesser dilution.

Aluminum alloy is considered an ideal material in aerospace, automobile and other fields because of its lightweight, high specific strength and easy processing. However, low hardness and strength of the surface of aluminum alloys are the main factors that limit their applications. The purpose of this study is to obtain a composite coating with high hardness and lubricating properties by applying GO–PVA over MAO coating.

A pulsed bipolar power supply was used as power supply to prepare the micro-arc oxidation (MAO) coating on 6061 aluminum sample. Then a graphene oxide-polyvinyl alcohol (GO–PVA) composite coating was prepared on MAO coating for subsequent experiments. Samples were characterized by Fourier infrared spectroscopy, X-ray diffraction, Raman spectroscopy and thermogravimetric analysis. The friction test is carried out by the relative movement of the copper ball and the aluminum disk on the friction tester.

Results showed that the friction coefficient of MAO samples was reduced by 80% after treated with GO–PVA composite film.

This research has made a certain contribution to the surface hardness and tribological issues involved in the lightweight design of aluminum alloys.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-12-2023-0427/