Search results

This paper aims to propose an efficient method to conduct the preliminary analyses of medium or high-rise wall-frame structural systems with vertically varying properties. To this end, a finite element is formulated to take the shear deformation of the shear wall and the constrained moment of the link beam.

The differential equation of the structure is derived from the total potential energy. Its homogenous solutions are functions of initial parameters (deflections and inner forces). To solve the structure with vertically non-uniform properties, the authors first use the classical Timoshenko beam element and then heuristically propose a finite element that uses the initial parameter solutions as shape functions and is easier to implement. A post-processing method to compute the shear force in the frame and shear wall is developed. Modal analysis using the consistent mass matrix is also incorporated. Numerical examples demonstrate the accuracy and mesh independency of the proposed element.

The shear deformation of the shear wall and the constrained moment of the link beam significantly influence the static response of the structure. Taking into account the shear deformation can eliminate the misleading result of zero-base shear force of the frame and give much better predictions of the system natural frequencies.

The proposed method achieves higher accuracy than the classical approach most often used. The finite element formulation derived from transformations of the initial parameter solutions is simple and has superior numerical performance. The post-processing method allows for a fast determination of the shear force distributions in the shear wall and frame.

The purpose of this paper is to study the seismic performance of the energy-saving block and invisible multi-ribbed frame composite walls (EBIMFCW), changing the shear-span ratio as the test parameter, the low-cycle reciprocating loading tests of six 1/2 scale wall models were carried out.

The test design method and analysis are used for the seismic performance of the EBIMFCW.

With the increase of shear-span ratio: the walls tend to occur bending failure even more, the initial stiffness of the wall decreases, the overall ductility of the wall is improved and the walls tend to occur bending failure.

The previous studies do not involve the seismic performance of EBIMFCW under different shear-span ratios. Therefore, the paper studies the hysteresis behavior, ductility, stiffness degradation and energy dissipation performance of EBIMFCW under different shear-span ratios.

Based on the weak seismic performance and low ductility of coupled shear walls, engineered cementitious composites (ECC) is utilized to strengthen it to solve the deformation problem in tall buildings more effectively and study its mechanical properties more deeply.

The properties of reinforced concrete coupled shear wall (RCCSW) and reinforced ECC coupled shear wall (RECSW) have been studied by numerical simulation, which is in good agreement with the experimental results. The reliability of the finite element model is verified. On this basis, a detailed parameter study is carried out, including the strength and reinforcement ratio of longitudinal rebar, the placement height of ECC in the wall limb and the position of ECC connecting beams. The study indexes include failure mode and the skeleton curve.

The results suggest that the bearing capacity of RECSW is significantly affected by the ratio of longitudinal rebar. When the ratio of longitudinal rebar increases from 0.47% to 3.35%, the bearing capacity of RECSW increases from 250 kN to 303 kN, an increase of 21%. The strength of longitudinal rebar has little influence on the bearing capacity of RECSW. When the strength of the longitudinal rebar increases, the bearing capacity of RECSW increases little. The failure mode of RECSW can be improved by lowering the casting height of the ECC beam in a certain range.

In this paper, ECC is used to strengthen the coupled shear wall, and the accuracy of the finite element model is verified from the failure mode and skeleton curve. On this basis, the casting height of the ECC casting wall limb, the strength and reinforcement ratio of longitudinal rebar and the position of the ECC beam are studied in detail.

Aiming at the characteristics of large stiffness, low ductility, and poor energy dissipation capacity of cross-laminated timber (CLT) shear wall, a method of opening vertical joints and adding low-yield dampers in CLT shear wall is proposed to improve its energy dissipation capacity and ductility.

The finite element model of CLT shear walls with low-yield dampers and dampers assembly was established by ABAQUS. The structural shape of low-yield dampers that meet the requirements of vertical joints in CLT shear walls is studied by numerical analysis. The influence of the number and position of low-yield dampers on the energy dissipation of the shear wall system is studied.

The results show that the low-yield damper with diamond openings should be used in the CLT shear wall, and the energy dissipation effect is the best when the CLT shear wall is uniformly covered with low-yield dampers. After the uniform arrangement of four groups of low-yield steel dampers, the energy consumption of the CLT shear wall increases by 75.38%, and the ductility increases by 13.22%.

There are few studies on replacing connectors between shear walls with low-yield steel dampers, and rectangular soft steel dampers are prone to stress concentration and poor deformation capacity. Therefore, this paper establishes the model of perforated low-yield damper and CLT and makes numerical analysis to determine the opening form, geometric parameters of low-yield damper, and the optimal layout scheme in CLT shear wall.

Steel shear walls have recently received exclusive remark. Respective of most building code requirements, design of shear wall vertical boundary elements (VBEs) and local boundary elements (LBEs) against web yielding triggers exaggerated stiffness. The extent of stiffness reduction effects in boundary elements thus calls for more exhaustive investigation. The paper aims to discuss these issues.

To this end, FEM-based push-over curves demonstrating base shear vs roof displacement, and von Mises plastic strains were scrutinized in half-scale and full-size models. Analyses were in perfect conformity with experimental data.

With reference to the AISC requirement, up to 35 percent decrease in the VBE moments of inertia could be imparted in higher levels without the ultimate load capacity nor displacement to failure being reduced. Also considered was open shear walls with reduced or minimum-design LBEs, the latter being used in continuous or abridged form. LBEs could be used with a moment of inertia 80 percent smaller than required if only used in a continuous form. The effect due to opening geometry was negligible on loading capacity but distinguished on the post-yielding buckling-induced softening.

Light-weight design of low- to medium-level steel structures against earthquake loads.

With respect to continuous walls, the results are more comprehensive than those existing in the literature in that they combine the effects due to scale and orientation (horizontal or vertical) of boundary elements. The results for open shear walls are not only comprehensive but also original in a sense that they account for the influences induced by the opening type (door or window), orientation (horizontal or vertical), and design (full-length or abridged) of boundary elements, in reduced form, on the lateral stiffness of the frame.

This study aims to present the variations of optimal seismic control of reinforced cement concrete (RCC) structure using different structural systems. Different third-dimensional mathematical models are used to examine the responses of multistory flexibly connected frames subjected to earthquake excitations.

This paper examined a G + 50 multi-storied high-rise structure, which is analyzed using different combinations of moment resistant frames, shear walls, seismic outrigger systems and seismic dampers to observe the effectiveness during ground motion against soft soil conditions. The damping coefficients of added dampers, providing both upper and lower levels are taken into consideration. A finite element modeling and analysis is generated. Then the nature of the structure exposed to ground motion is captured with response spectrum analysis, using BNBC-2020 for four different seismic zones in Bangladesh.

The response of the structure is investigated according to the amplitude of the displacements, drifts, base shear, stiffness and torsion. The numerical results indicate that adding dampers at the base level can be the most effective against seismic control. However, placing an outrigger bracing system at the middle and top end with shear wall can be the most effective for controlling displacements and drifts.

The response of high-rise structures to seismic forces in Bangladesh’s soft soil conditions is examined at various levels in this study. This study is an original research which contributes to the knowledge to build earthquake resisting high-rises in Bangladesh.

This paper aims to propose a generalized finite element technique that can accurately approximate the solution of the flexural-shear cantilever model of wall-frame structures proposed by Heidebrecht and Stafford Smith.

This approach adopts scaled monomials as enrichment functions, and they are highly effective in accurately capturing the solution of the problem, as it consists of smooth functions such as polynomials, hyperbolic and trigonometric functions. Several numerical experiments are performed on the static and modal analyses of the flexural-shear cantilever wall-frame structures using the proposed generalized finite element method (GFEM), and their accuracies are compared with those obtained using the standard finite element method.

The proposed GFEM is able to achieve theoretical convergence rates of the static and modal analyses, which are, in principle, identical to those of the standard FEM, for various polynomial orders of its shape functions such as quadratic, cubic and quartic orders. The proposed GFEM with quartic enrichment functions can provide more accurate solutions than the standard FEM, and thus can be effectively used at the initial design stage of high-rise wall-frame structures.

This work is the first paper where the GFEM is applied to the analysis of high-rise wall-frame structures, and the developed technique can be used as a good analysis tool at the initial design stage.

In this study, the application of a novel combined steel curved damper (SCD) and steel plate shear wall (SPSW) system in the 5-, 10- and 15-storey steel moment-resisting frames (SMR) subjected to earthquake excitation has been investigated. The proposed system is called here as the SMR-WD (steel moment resisting–wall damper).

At the beginning of this research, an SMR-W and an SMR-D are separately modeled in ABAQUS software and verified against the available experimental data. After that, three different heights SMR-WD systems (5-, 10- and 15-storey) are designed and simulated. Then, their performances are examined and compared to the corresponding SMR-W under the effects of six actual earthquake records.

The obtained results show that the proposed system increases the mean values of the base shear for 5-, 10- and 15-storey SMR-WD equal to 27, 20.15 and 16.51%, respectively compared to the corresponding SMR-W. Moreover, this system reduces the drift of the floors so that the reduction in the average values of maximum drift for 5-, 10- and 15-storey SMR-WD is equal to 10, 7 and 29%, respectively with respect to the corresponding SMR-W. The results also reveal that the considered system dissipates more energy than SMR-W so that the increase in the mean values of the energy absorption for 5-, 10- and 15-storey SMR-WD is 30.8, 25.6 and 41.3%, respectively when compared to the SMR-W. Furthermore, it is observed that SMR-WD has a positive effect on the seismic performance of the link beams and panel zones of the frames. By increasing the height of the structure in the SMR-WD, the energy dissipation and base shear force increases and the drift of floors decreases. Hereupon, the proposed SMR-WD system is more useful for tall buildings than SMR-W frames.

For the first time, the application of a novel combined steel curved damper (SCD) and steel plate shear wall (SPSW) system in the 5-, 10- and 15-storey steel moment-resisting frames (SMR) subjected to earthquake excitation has been investigated.

This paper aims to present a multi-scale stochastic damage model (SDM) for concrete and apply it to the stochastic response analysis of reinforced concrete shear wall structures.

The proposed SDM is constructed at two scales, i.e. the macro-scale and the micro-scale. The general framework of the SDM is established on the basis of the continuum damage mechanics (CDM) at the macro-scale, whereas the detailed damage evolution is determined through a parallel fiber buddle model at the micro-scale. The parallel buddle model is made up of micro-elements with stochastic fracture strains, and a one-dimensional random field is assumed for the fracture strain distribution. To represent the random field, a random functional method is adopted to quantify the stochastic damage evolution process with only two variables; thus, the numerical efficiency is greatly enhanced. Meanwhile, the probability density evolution method (PDEM) is introduced for the structural stochastic response analysis.

By combing the SDM and PDEM, the probabilistic analysis of a shear wall structure is performed. The mean value, standard deviation and the probability density function of the shear wall responses, e.g., shear capacity, accumulated energy consumption and damage evolution, are obtained.

It is noted that the proposed method can reflect the influences of randomness from material level to structural level, and is efficient for stochastic response determination of shear wall structures.

This paper aims to study, the effects of opening shape, size and position as well as the aspect (height-to-length) ratio on the shear capacity, stiffness, ductility and energy dissipation capacity of triple-skin profiled steel-concrete composite shear wall (TSCSW) and investigate and compare them to those of concrete-stiffened steel plate shear walls (CSPSW). Two kinds of opening, circular and square, with different sizes and positions and two aspect ratios of 1:1 and 3:1 are considered in the simulations.

This study presents a novel TSCSW and compares its behavior with the existing CSPSW under the effect of monotonic and cyclic loadings. TSCSW is composed of three corrugated steel plates filled with concrete. The two external side plates are connected to the concrete core by means of several intermediate fasteners and the third one is an inner steel plate embedded within the concrete panel. The internal plate is a buckling restrained plate surrounded by concrete. This is the main superiority of TSCSW over other kinds of existing composite shear walls.

The results show that the shear capacity and the energy dissipation capacity of the proposed composite wall, TSCSW, are respectively about 16 and 12% higher than those of CSPSW when there is no opening. If an opening is considered in the wall, as the size of the opening is increased, the shear capacity, stiffness, ductility and absorbed energy of the two walls are decreased similarly. The destructive effect of square openings on the performance of the walls is more than that of circular openings.

This is an original work.