Search results
1 – 10 of 63Narpat Ram Sangwa, Kuldip Singh Sangwan, Kiran Kumar Paidipati and Bhavin Shah
This paper aims to present a simple and innovative fuzzy methodology-based lean performance measurement system (L-PMS) for an Indian automotive supply chain. The paper also…
Abstract
Purpose
This paper aims to present a simple and innovative fuzzy methodology-based lean performance measurement system (L-PMS) for an Indian automotive supply chain. The paper also enlightens the influence of coronavirus disease 2019 (COVID-19) on supply chains and the practical implications of the unprecedented disruptions on the performance measurement systems.
Design/methodology/approach
The L-PMS is divided into three phases. In the first phase, the key performance indicator (KPI) list, as deemed fit by the organization, is prepared using literature and suggestions from the case organization. The list contains 61 KPIs measuring 24 performance dimensions in seven functional areas of the supply chain. In the second phase, the KPI performance data (actual, best and worst) are collected using the enterprise resource planning (ERP) system. In the last phase, the leanness score of the case organization is calculated at four levels – KPI, dimension, functional area and overall organization.
Findings
The overall leanness score of the case organization is 60%. The case organization uses KPIs from all seven functional areas, but it needs to improve the number of KPIs in administration and supplier management functional areas. The case organization uses only quantitative KPIs. However, the performance dimensions at the middle level are adequate. The leanness level of the case organization in different areas is highly variable (ranges from 45% to 91%).
Research limitations/implications
The major limitation of the study is that the case study is done at a single organization.
Practical implications
The managers at the different levels of the hierarchy can use the lean performance measurement score to leverage the better performing areas/dimensions/KPIs and improve poor performing areas/dimensions/KPIs. The lean performance measurement at functional area level can help leadership to give responsibility to different people for the improvement of leanness with respect to different dimensions/functional areas. The disruptive impact of COVID-19 should clearly be understood by the managers to make appropriate decisions based on the severity as measured at different levels.
Originality/value
According to the authors' best knowledge, this is the first lean performance measurement application at the four hierarchical levels (KPI, performance dimension, functional area and overall organization).
Details
Keywords
Kanan Elumalai and Anjani Kumar
This paper aims to analyze relative contribution of intensive margin (IM) and extensive margin (EM) to growth in India's agricultural exports for the period 2001 to 2020. It also…
Abstract
Purpose
This paper aims to analyze relative contribution of intensive margin (IM) and extensive margin (EM) to growth in India's agricultural exports for the period 2001 to 2020. It also analyses the determinants of IM and EMs through a standard gravity model.
Design/methodology/approach
The study uses export data from United Nations Comtrade, which is accessed through World Integrated Trade Solution (WITS) software. Data for the period 2001 to 2020 were compiled for analysis using the Harmonized System (HS) of commodity classification system at the six-digit level. This study decomposed the contribution of IM and EM in the growth of Indian agricultural trade by using Hummels and Klenow's approach. After performing the export decomposition analysis, the authors analyze the factors influencing IM and EM by using the Tobit regression model and Poisson pseudo-maximum-likelihood (PPML) method of estimation.
Findings
The EM grew at 1.24% per annum, while the intensive margin (IM) increased by 0.23%. The contribution of growth at the EM increased from 58.8% in 2001 to 70.2% in 2020. Export growth along the IM was relatively high for animal products and agricultural raw materials, while growth at the EM was an important contributor to the export growth of horticultural and processed agricultural products. There was a positive and significant effect of the free trade agreement (FTA) on export margins.
Research limitations/implications
More disaggregated commodity-specific studies on value chain analysis would provide valuable insights into the issues hindering exports and realizing the untapped export potential.
Originality/value
There is a scarcity of holistic and recent studies illustrating the role of IM and EMs in agricultural trade growth, covering a large number of commodities and geographies associated with Indian agricultural trade. The study would be helpful to the stakeholders in facilitating informed policy decisions.
Details
Keywords
Ram Asra Khural, Shashi, Myriam Ertz and Roberto Cerchione
This study explores the relationships among sustainability implementation barriers (resource, managerial and regulatory barriers), sustainability practices (sustainable…
Abstract
Purpose
This study explores the relationships among sustainability implementation barriers (resource, managerial and regulatory barriers), sustainability practices (sustainable construction materials, sustainable construction design, modern construction methods and environmental provisions and reporting) and sustainability performance (environmental, economic and social) in hill road construction (HRC).
Design/methodology/approach
Primary data were collected from the 313 HRC practitioners with the help of a questionnaire, and research hypotheses were tested employing structural equation modeling.
Findings
The findings reveal a mixed effect of sustainability implementation barriers. Resource (managerial) barriers are negatively related to all practices except environmental provisions and reporting (sustainable construction materials), while regulatory barriers only negatively impact modern construction methods. On the other hand, all sustainability practices positively impact environmental performance, whereas economic (social) performance is positively influenced by all practices, except environmental provisions and reporting (modern construction methods), and positively affects economic performance.
Originality/value
In order to transform HRC toward sustainability, the barriers to sustainability implementation, sustainability practices and performance need to be understood by practitioners; however, the relationships have not previously been empirically assessed in extant literature. Besides, past research appears to be predominantly focused on the environmental aspect, thereby neglecting economic and social aspects. This study is a modest attempt to bridge these research gaps.
Details
Keywords
Deepak Bubber, Gulshan Babber, Shashi and Rakesh Kumar Jain
This study aims to explore the interrelationships among human-related lean practices, lean production shop floors, process quality, inventory management, operational productivity…
Abstract
Purpose
This study aims to explore the interrelationships among human-related lean practices, lean production shop floors, process quality, inventory management, operational productivity and business productivity.
Design/methodology/approach
This study used a cross-sectional survey approach, and quantitative data were collected from 324 Indian auto-component manufacturing firms. Confirmatory factor analysis was used, followed by structural equation modelling techniques for the conceptual model, which incorporated a complete set of 11 hypotheses.
Findings
The results confirmed that human-related lean practices trigger lean production shop floors and improve process quality. Furthermore, the study revealed the positive impact of a lean production shop floor on process quality and inventory management and the positive impact of process quality on both operational and business productivity. Finally, inventory management is of the utmost importance in achieving better operational and business productivity, and operational productivity positively leads to business productivity.
Originality/value
The findings of this study can benefit auto-component manufacturing firms by elucidating the complex relationships between human-related lean practices, lean production shop floors, process quality, inventory management, operational productivity and business productivity. Better knowledge of these relationships will enable firms to enhance efficiency levels, reduce costs and resource wastage and improve their overall performance. This study provides a good understanding of the interplay between lean and quality factors and their influence on inventory management and business performance.
Details
Keywords
Deepak Bubber, Rakesh Kumar Jain, Gulshan Babber and Shashi
In this study, the authors assess the current state of lean product development and the lean production shop floor, along with the impact of the former on process quality and the…
Abstract
Purpose
In this study, the authors assess the current state of lean product development and the lean production shop floor, along with the impact of the former on process quality and the latter on product quality and customer complaint reduction. The interplay between process and product quality and customer complaint reduction is assessed, along with their impacts on business performance.
Design/methodology/approach
Data were collected from 377 managers working at auto-component manufacturing firms in India. Confirmatory factor analysis was used for scale validation, and structural equation modelling was employed to test the research hypotheses.
Findings
The results of the statistical analyses reveal the positive influence of a lean production shop floor on process quality and lean product development on product quality and customer complaint reduction, and thereby on business performance.
Practical implications
The findings of this research provide insights into the interplay between lean and quality factors and their influence on customer complaint reduction and business performance. Practitioners can use the proposed model to strategically design unique products and improve the efficiency and effectiveness of the production shop floor, which can help enhance the product and process quality. This can reduce customer dissatisfaction and improve the business performance.
Originality/value
Few studies have simultaneously investigated the influence of lean product development and lean production shop floors in the Indian manufacturing context. To the best of our knowledge, this study is one of the first attempts to include customer complaint reduction as a construct in a lean model. It helps identify and prioritise the enablers of business performance and provides valuable insights for practitioners to strengthen lean implementation to attain a competitive edge.
Details
Keywords
Shreya Jha, Shashi Kant, Nishakar Thakur, Pradeep Kumar, Sanjay Rai, Partha Haldar, Priyanka Kardam, Puneet Misra, Kiran Goswami and Shobini Rajan
Prisoners are at a higher risk of HIV infection compared to the general population. The purpose of this study is to estimate the prevalence of HIV and related risk behaviours…
Abstract
Purpose
Prisoners are at a higher risk of HIV infection compared to the general population. The purpose of this study is to estimate the prevalence of HIV and related risk behaviours among inmates of the Central Prisons in four states of North India.
Design/methodology/approach
The HIV sentinel surveillance was conducted in seven Central Prisons in four states of North India from February to April 2019. Four hundred inmates were included from each prison. The interviews were conducted at the Integrated Counselling and Testing Centre located within the prison premises. The Ethics Committee of the National AIDS Control Organization, New Delhi, granted ethical approval before the start of the surveillance.
Findings
Overall, 2,721 inmates were enrolled in this study. The mean (SD) age was 38.9 (13.9) years. One-third of prison inmates had comprehensive knowledge about HIV/AIDS. The proportion of convict (54%) and undertrial (46%) inmates was almost equal. The overall prevalence of HIV infection among inmates was 0.96% (95% CI 0.65–1.40). The odds of being HIV positive were significantly higher in never married inmates, undertrials, inmates who were in the prison for more than three months to one year, inmates incarcerated for multiple times, inmates with history of injecting drug use and inmates with history of intercourse with a commercial sex worker.
Originality/value
The findings from the very first HIV sentinel surveillance in central prisons in North India have been presented in this paper. This has huge implications for future policy decisions.
Details
Keywords
Anas Islam, Shashi Prakash Dwivedi, Rajat Yadav and Vijay Kumar Dwivedi
The purpose of this study to find an alternate method to minimize waste i.e., eggshell and rice husk ash. In this paper, eggshell (ES) and rice husk ash (RHA) particles are used…
Abstract
Purpose
The purpose of this study to find an alternate method to minimize waste i.e., eggshell and rice husk ash. In this paper, eggshell (ES) and rice husk ash (RHA) particles are used as reinforcements for examining their effect on the coefficient of thermal expansion (CTE), grain size (GS) and corrosion behavior for developed composite material.
Design/methodology/approach
In this investigation, 5 Wt.% each of ES and RHA reinforcement particles have been introduced. To investigate the microstructures of the developed composite material, scanning electron microscope was used. Physical and mechanical properties of composite material are tensile strength and hardness that have been examined.
Findings
The result of this paper shows that number of grains per square inch for composition Al/5% ES/5% RHA composite was found to be 1,243. Minimum value of the volume CTE was found to be 6.67 × 10–6/°C for Al/5% ES/5% RHA composite. The distribution of hard phases of ES particles in metal matrix is responsible for improvements in tensile strength and hardness. These findings demonstrated that using carbonized ES as reinforcement provides superior mechanical and physical properties than using uncarbonized ES particles.
Originality/value
There are several articles examining the impact of varying Wt.% of carbonized ES and rice husk reinforcement on the microstructures and mechanical characteristics of metal composites. CTE, GS and corrosion behavior are among of the features that are examined in this paper.
Details
Keywords
Sayed Gulzar Ganai, Javid Ahmad Khan and Showkat Ahmad Bhat
The export competitiveness has only calculated on only two aspects either comparatively advantageous or comparatively disadvantageous products for India or China. There is not any…
Abstract
Purpose
The export competitiveness has only calculated on only two aspects either comparatively advantageous or comparatively disadvantageous products for India or China. There is not any thorough study that has been undertaken for Indian manufacturing sector at a segregated level along with that of China. So, in the light of these shortcomings, the purpose of this study is to analyse the dynamics of export competitiveness of indian manufacturing sector vis-à-vis its emerging counterpart, china in the global market.
Design/methodology/approach
A modified revealed comparative advantage index has been used in two different phases of 2001–08 and 2010–18 to find the dynamic pattern of manufacturing exports of India and China in the world market.
Findings
The study revealed that India has shown a positive response in increasing its competitive positioned products from low-technology to medium-technology products during the study period. There has been a decline in the competitive positioned products of China and simultaneously China’s threatened product lines have shown an immense increment over the years. Moreover, Indian exports are concentrated to few low-technology and resource-intensive products, that share more than 50% of total exported value for its manufacturing in the global market, whereas, China is much diversified and the exported value is more scattered over its manufactured items.
Research limitations/implications
The study does not include the factors that impacted the export competitiveness of the sample economies and thus adds a limitation to this study.
Originality/value
As there is very limited research on dynamics of export competitiveness of Indian manufacturing exports at harmonised system 6-digit level with China, this study fulfils the gap.
Details
Keywords
Sakshi Kathuria, Shashi and Urvashi Tandon
Digitalization, financial technologies and the internet have rapidly advanced the business ecosystem posing a disruptive threat to how operations are fundamentally performed…
Abstract
Purpose
Digitalization, financial technologies and the internet have rapidly advanced the business ecosystem posing a disruptive threat to how operations are fundamentally performed. Global hospitality and tourism companies face this challenge and have been early adopters in this field. This study aims to examine the role of blockchain technology in strengthening the marketing mix (product, price, place and promotion) and the its related impacts on the tourism industry.
Design/methodology/approach
This research adopts a systematic literature review approach to synthesize and assess the literature published on blockchain in tourism and tends to build a conceptual framework that depicts the relationships between different constructs.
Findings
The results show a lot of interest in using blockchain technology due to numerous advantages to tourism industry. This innovative technology can change this sector radically; assist small economies in strengthening and transitioning to the level of developed economies; and assist tourism companies in eliminating corruption, establishing a secure network and promoting equality between small and large entities.
Originality/value
Through industry examples demonstrating real-life use cases such as startups operating on the application of blockchain in tourism, to the best of the authors’ knowledge, this paper is a first attempt to draw the impact of blockchain technology on product, price, place, promotion (4Ps) in tourism sector. The proposed nine relationships can facilitate the future researchers in advancing the state-of-art on how blockchain-based technologies can shape the customers experience through promoting confidentiality, co-creation and effective destination planning.
Details
Keywords
Gulshan Babber and Amit Mittal
The purpose of this study is to learn how the incorporation and use of leanness, agility and innovation in Indian manufacturing micro, small and medium enterprises (MSMEs) affect…
Abstract
Purpose
The purpose of this study is to learn how the incorporation and use of leanness, agility and innovation in Indian manufacturing micro, small and medium enterprises (MSMEs) affect their bottom lines and how much these factors contribute to the MSMEs’ ability to meet their long-term sustainability goals.
Design/methodology/approach
The suggested model was subjected to data validation and additional empirical validation using a sample of 411 Indian manufacturing MSMEs. The analysis of construct measures is conducted through the utilization of confirmatory factor analysis, a statistical technique that is grounded in the theoretical framework of structural equation modeling (SEM). In addition, path model analysis was applied for the purpose to validate the assumptions that were included in the structural models.
Findings
Consistent with the proposed model, the findings of this study demonstrate that leanness, agility and innovation have a substantial favorable impact on the sustainability of a company’s performance. These findings may be helpful in gaining professionals, academics and policymakers to acknowledge the significance of leanness, agility and innovation in enhancing the long-term sustainability of MSMEs and enhancing the overall performance of a particular company. This research excluded the service industries-based research papers.
Research limitations/implications
Many research in the field of manufacturing industries that have adopted leanness, agility, innovativeness and sustainability as individual approaches or as a collective methodology of two or more were considered in the current study. This research excluded the service industries-based research papers.
Practical implications
This literature review has recognized and analyzed various dimensions and roles of leanness, agility, innovativeness and sustainability that are prevalent in manufacturing industries that include the positive and negative effects on the performance of the industries. The research enlightens the path and shows future directions for research to develop efficient, effective and sustainable manufacturing industries.
Social implications
By promoting the concept of focusing on the “human factor”, namely, stakeholder perspectives, the MSME sector is propagating a strategy that moves away from an excessive focus on technology and toward a more humane one. Through the application of the three key concepts of leanness, agility and innovation, this work aims to create a framework for measuring the sustainability performance of micro-, small- and medium-sized enterprises (MSMEs), with the ultimate goal of assisting the country in achieving the Sustainable Development Goals in the fields of industry, innovation and infrastructure by supporting environmentally friendly and resource-conserving businesses that give back to society and the natural environment.
Originality/value
The objective of this research is to assess the importance and effectiveness of integrating various approaches such as leanness, agility, innovativeness and sustainability within the framework of manufacturing micro, small, and medium enterprises (MSMEs). The authors hope that by going further into these concepts, they will be able to broaden their understanding and get a more comprehensive insight into the role that these concepts play and how they might be successfully used within this environment.
Details