Search results

The purpose of this study is to assess the influence of Al and Ag addition on thermal, mechanical and shape memory properties of Cu-Al-Ag alloy.

The material is synthesized in a controlled atmosphere to minimize the reaction of alloying elements with the atmosphere. Cast samples were homogenized, then subjected to hot rolling and further betatized, followed by step quenching. Eight samples were chosen for study among which first four samples varied in Al content, and the next set of four samples varied in Ag composition.

The testing yielded a result that the increase in binary alloying element decreased transformation temperature range but increased entropy and elastic energy values. It also improved the shape memory effect and mechanical properties (UTS and hardness). An increase in ternary alloying element increased transformation temperature range, entropy and elastic energy values. The shape memory effect and mechanical properties are enhanced by the increase in ternary alloying element. The study revealed that compositional variation of Al should be limited to a range of 8 to 14 Wt.% and Ag from 2 to 8 Wt.%. Microstructural and diffraction studies identified the ß’1 martensite as a desirable phase for enhancing shape memory properties.

Numerous studies have been made in exploring the transformation temperature and phase formation for similar Cu-Al-Ag shape memory alloys, but their influence on shape memory effect was not extensively studied. In the present work, the influence of Al and Ag content on shape memory characteristics is carried out to increase the design choice for engineering applications of shape memory alloy. These materials exhibit mechanical and shape memory properties within operating ranges similar to other copper-based shape memory alloys.

The purpose of this paper is to present short characteristics of shape memory alloys (SMA) and shape memory polymers (SMP) and some examples of application of these materials in industrial sealing technology.

In this paper, short characteristic of shape memory materials and design examples of applying them in industrial sealing technology such as: tube coupling in hydraulic systems, flanged pipe connections, lip radial seal, mechanical face seal, soft gland packing, magnetic fluid seal, and in bearing seal system for drill bit, are given.

The paper provides information about innovative fluid seal designs based on particular properties of the shape memory materials, applied in stationary joints, and rotary equipments. These new solutions provide often to simplify seal design, their miniaturization, increase of tightness, and reduction of operating costs.

This paper offers some new fluid seal designs based on the shape memory materials and their practical application in industrial sealing technology.

Shape memory polymers (SMPs) respond with a change in their shape against a specific stimulus by memorizing their original shape and are reformed after deformation most often by changing the temperature of the surrounding without additional mechanical efforts. In the coming years, these polymers indeed will be in limelight to manufacture textile materials which will retain their shape even after prolonged use under disturbed conditions. This study aims at defining shape memory materials and polymers as well as their technological characteristics and also highlights application in various fields of textiles.

The methodology used to explain these SMPs have been carried out starting with the discussion on their properties, their physical nature, types, viz., shape memory alloys (SMAs), shape memory ceramics, shape memory hybrid, magnetic shape memory alloy, shape memory composites, shape memory gels and SMP along with properties of each type. Other related details of these polymers, such as their advantages, structure and mechanism, shape memory functionality, thermally responsive SMPs and applications, have been detailed.

It has been observed that the SMPs are very important in the fields of wet and melt-spun fibers to offer novel and functional properties, cotton and wool fabric finishing, to produce SMP films, foams and laminated textiles, water vapor permeable and breathable SMP films, etc.

The field of SMPs is new, and very limited information is available to enable their smooth production and handling.

In recent years, the use of high performing materials, and application of additive manufacturing technology for industrial production has witnessed a steady rise and its expanse is only to increase in the future. “Selective laser melting (SLM) technique” for an exotic nickel-titanium (NiTi) shape memory alloy (SMA) is expected to a great facilitator to research in this area. The purpose of this paper is to put forth the research direction of NiTi shape memory alloy by selective laser melting.

This review also summaries and skims out the information on process equipment, adopted methodologies/strategies, effects of process parameters on important responses e.g. microstructure and comprehensive functional and mechanical properties of SLM-NiTi. In particular, the functional characteristics (i.e. shape memory effects and super-elasticity behavior), process analysis and application status are discussed.

Current progresses and challenges in fabricating NiTi-SMA of SLM technology are presented.

This review is a useful tool for professional and researchers with an interest in the field of SLM of NiTi-SMA.

This review provides a comprehensive review of the publications related to the SLM techniques of NiTi-SMA while highlighting current challenges and methods of solving them.

The purpose of this paper is to provide a review of the technology and applications of shape‐memory materials (SMMs).

This paper initially considers various classes of SMMs and their properties. It then discusses applications and concludes with a brief review of recent research and future prospects.

SMMs include shape‐memory alloys (SMAs), ferromagnetic SMAs (FSMAs) and shape‐memory polymers (SMPs), which change shape when influenced by temperature and other stimuli. SMAs comprising nickel‐titanium alloys were discovered and commercialised first and find uses in fittings, seals, valves, actuators and medical devices due to their thermoelastic properties. Their pseudoelastic properties are exploited in spectacle frames and other deformable metal products. FSMAs and SMPs were discovered more recently and are at an early stage of commercialisation and remain the topic of on‐going research. Pilot applications are being investigated in the healthcare, aerospace, automotive and other industries. All classes of SMMs have prospects for more widespread uses in the future.

Provides a detailed review of SMM materials, products and application and an insight into future developments.

Shape memory alloys are a fascinating class of materials because they combine both structural and functional properties. These properties strongly depend on temperature. One consequence of this dependency yields the characteristic shape‐memory effect: shape memory alloys can recover processed reference configurations after significant plastic deformations simply upon a change of temperature. For real materials, such processes incorporate characteristic hysteresis. This paper aims at an understanding of these materials from an atomistic point of view.

2D molecular‐dynamics (MD) simulations describing a chain consisting of 32 linked Lennard‐Jones crystals are presented. The crystals consist of nested lattices of two atom species. Distinct lattice structures can be identified, interpreted as austenite and (variants of) martensite. Temperature and/or load‐induced phase transitions between these configurations are observed in MD simulations. Previously, the thermal equation of state of one isolated crystal was investigated and its phase stability was discussed in detail. In the multi‐crystal chain considered in the present paper, individual crystals contribute collectively to the thermo‐mechanical behavior of the assembly.

The paper presents the results of numerical experiments with this polycrystalline chain under strain‐, load‐ and/or temperature‐control. The results show that with the assumption of simple Lennard‐Jones potentials of interaction between atoms in individual crystals and linking these crystals allows to reproduce the features associated with the fascinating behavior of shape memory alloys, including pseudo‐plasticity, pseudo‐elasticity and the shape memory effect.

Owing to the special setup chosen, interfaces are missing between adjacent crystals in the chain assembly. The paper shows that in this situation load‐induced austenite/martensite transitions do not exhibit hysteresis in tension/compression cycles. This observation indirectly supports mesoscopic‐level work in the literature which explicitly introduces interface energy to model such hysteresis.

This paper aims to examine customized NiTi jewels with functional properties fabricated through four-dimensional (4D)-printing.

Two opened rings are fabricated through selective laser melting starting from 55.2Ni-Ti (wt.%) micrometric powder. After the additive process the two rings present the one-way shape memory effect (OWSME). A specific training is accomplished on one of the two printed rings to promote the two-way shape memory effect (TWSME). Both the samples, namely, the rings, respectively, presenting the OWSME and TWSME property, follow a series of post-processing routes to improve the surface finish. Furthermore, a thermal treatment at high temperature is used to create a thin colored oxide layer on the sample surface.

Results show that the change of shape owing to the OWSME and TWSME properties allows the customized 4D-printed rings to be adaptable to environmental changes such as load and temperature variations. This adaptability improves comfort and fit of the jewels.

To the best of the authors’ knowledge, in this work, first cases of additively manufactured NiTi jewels are reported to propose innovative solutions in the design and processing industry of jewels.

The purpose of this paper is to explore the possibility of producing Cu-based shape memory alloys (SMA) by means of direct metal laser fabrication (DMLF).

The fabrication approach consists of the combination of laser melting of a metallic powder with heating treatment in a controlled inert atmosphere. Three prospective Cu-Al-Ni alloy compositions were tested, and the effects of laser power, as well as laser exposure time, were verified.

All the processed materials were found to attain microstructures and phase change transformation temperatures typical of this type of SMA.

Further development of this technique will allow for fabrication of large elements with considerable shape memory effect, which are currently not viable due to high cost of nitinol.

This work showed a proof of concept toward the development of DMLF-based additive manufacturing of near net shape components of Cu-based SMAs from elemental powders.

Describes a range of cryogenic tube and pipe couplings which make use of shape memory alloy technology in order to form permanent metal‐to‐metal seals on aircraft. Compares and contrasts their costs and method of installation with alternative swaged systems.

This paper aims to better control the mechanical properties and functional properties of NiTi alloy.

NiTi alloy samples with equal atomic ratio were formed by selective laser melting (SLM). X-ray diffraction (XRD), differential scanning calorimetry (DSC), scanning electron microscopy and tensile testing methods were used to study the effects of different laser power and scanning speed on the densification behavior, phase transformation characteristics and mechanical properties of NiTi alloy.

Compared with the laser power, the variation of the keyhole effect caused by the change of scanning speed is more intense, which has a greater effect on the densification behavior of SLM NiTi alloy. The effect of the laser power on the phase transition temperature is small. The increase of scanning speed weakens the burning degree of Ni element, so phase transition temperature decreases. The results of DSC test and tensile test show that the scanning velocity can significantly change the phase transition temperature, martensite twins reorientation and stress–strain behavior of SLM NiTi alloy.

This study provides a potential method to regulate the mechanical properties and functional properties of NiTi shape memory alloy in the future and NiTi alloys formed by SLM with good elongation were obtained because the Supercellular crystal structure formed during the nonequilibrium solidification of SLM and the superfine precipitates dispersed in the alloy prevented the dislocation formation.