Search results

The purpose of this paper is to overview carefully selected existing literature to enable further analysis directly concerned with facilities management (FM) supply chain structure, components, strategic issues, challenges and risk. Following the key aspects of assembly, design and, most importantly, management of FM supply chain are explored so that a guidance design framework can be put forward.

This paper examines the optimum technique that can be applied by clients and FM service providers where FM functions are outsourced. The paper initially defines the network structure of the FM supply chain and then suggests a conceptual model for making decisions about FM supply chain network at the strategy level. Furthermore, the paper argues for both supply chain design and for critical node micro management in a transparent supply chain environment with the FM acting as the strategic lens through which the focus of the supply chain is achieved.

This paper presents a process for designing and making decisions of FM service supply chain network. The process begins with an examination of the needs of facility services. It is followed by the step of identifying available options in delivering and processing the services. The third stage involves modelling structures of FM supply chain network. Then to make a final decision, all possible models have to be evaluated for their optimisation, both quantitative (cost) and qualitative (performance). At the end, the model with best optimisation should be selected.

This paper proposes a conceptual framework for designing facility service supply chain strategy and configuration to fit with the specific nature of facility service demand of a given organisation. The framework, featuring a set of processes including examining demand nature, identifying options available and analysing options, is first aimed at providing an assisting tool in identifying optimum supply chain network/solution of facility services and, second, intends to stimulate further discussions on this continuously evolving and challenging market.

This paper aims to describe typical regional document supply networks in China through detailed discussion of their framework, service mode and influence on the nationwide document supply networks.

This paper highlights various kinds of regional document supply networks in China that serve as document resource sharing cooperation networks within provinces, cities and university towns. Their framework, service mode and influence on the nationwide document supply networks are discussed, followed by suggestions for improvement.

Regional document supply networks have their natural advantages in local financial support and extensive local coverage and are capable of providing fine service to meet various user needs timely and economically. They become an important part and beneficial supplement to nationwide document supply networks.

This paper studies regional document supply networks in China which has rarely been addressed in the international library literature.

This investigation is designed to quantify and appraise the efficiency of resource distribution in the provision of public digital cultural services in China. By acknowledging and incorporating the realities of China's social development, the authors offer recommendations for enhancement derived from the study’s data analysis results. The research zeroes in on the dissection and analysis of the integral elements that structure the provision of public digital cultural services, and it concentrates on the associated data computation. The conclusions drawn herein are expected to serve as a significant point of reference for ongoing academic investigations and practical explorations in affiliated domains.

In this research, the authors utilize a hybrid methodology to meticulously evaluate the efficiency of the components that underpin the provision of public digital cultural services (PDCS) in China. The authors embark on deconstructing the various constituents within the PDCS supply framework, conducting in-depth analyses and providing cogent interpretations of each integral element. Subsequently, the authors deploy the well-regarded SBM super-efficiency model to ascertain the operational efficiency of these components. Ultimately, through a comprehensive interpretation of the measured data and the integration of extant societal development conditions, the authors put forth relevant recommendations.

The provision of PDCS in China as of 2021 had been characterized by overall good efficiency, significant regional disparity and a disconnect between inputs and outputs with weak correlations to economic and demographic data.

In this study, the authors provide an exhaustive deconstruction and interpretation of the public digital cultural services supply system, thereby proposing a framework for evaluating the efficiency of supply element allocation. Additionally, the authors have determined a set of distinct measurable indicators that are readily accessible for open collection. Notably, this analytical and evaluative framework designed for element analysis and measurement may also find application in efficiency evaluation research of the supply systems of other related cultural endeavors.

The performance of service supply chains in terms of service levels and cost efficiency depends not only on the effort of service providers but also on the inputs of sub-contractors and the customer. In this sense, performance-based contracting (PBC) entails increased financial risk for providers. Allocating and managing risk through contractual relationships along the service supply chain is a critical issue, and yet there is scant empirical evidence regarding what factors influence, and how, provider willingness to bear PBC-induced risk. This paper aims to address this gap.

The paper draws on agency theory and two cases of logistics service supply chains, in the food retail and automotive industries respectively, to identify key influencing factors. Data were collected through semi-structured interviews with 30 managers of providers and sub-contractors and review of 35 documents, notably contracts and target letters.

Four influencing factors were found: performance attributability within the service supply chain; relational governance in service supply chain relationships; provider risk and reward balancing; and provider ability to transfer risk to sub-contractors. The propositions developed address how these factors influence provider willingness to bear PBC-induced risk.

The factors identified are external to the provider mindset and refer to the management of contractual relationships and service delivery interactions along the service supply chain. The paper contributes to agency theory by stressing the risk allocation implications of bi-directional principal-agent relations in service supply chains.

The study suggests ways in which providers can increase their capacity to bear and manage financial risk related to PBC design.

The paper identifies factors that influence provider willingness to bear financial risk induced by PBC in service supply chains.

Gridded management in the public service supply is still in the experience exploratory stage, and this paper aims to analyze the inherent logic and operation mode of the gridding mechanism of the public supply based on the existing theory study and practices, and verify its efficiency so as to come to the conclusion whether it could be promoted to a wider range.

The methodology applied in this paper was case study/deductive induction.

The grid model in the public service supply needs to be demonstrated completely in theoretical logic and operation principles before it is promoted across the country. Meanwhile, full support of the government is required in terms of service concept, function distribution, technical parameters and infrastructure.

The inherent logic and operation mode of the gridding mechanism of the public service supply needs enough practice tests. The practical test of efficiency analysis of the gridding mechanism of the public service supply is not enough.

This paper validated whether the gridding mechanism that originated from China’s urban management can be promoted to all over the country in the public service supply. It provides references for government policy.

This paper constructs a gridded management model for public service provision in urban and rural areas on the basis of an analysis of the plight of traditional model of public service provision, thus delivering the same standard of public service for both urban and rural areas through optimization of resource allocation without requiring more supply and fundamental change to the content of service.

The purpose of this paper is to analyse health service supply chain systems. A great deal of literature is available on supply chain management in finished goods inventory situations; however, little research exists on managing service capacity when finished goods inventories are absent.

System dynamics models for a typical service‐oriented supply chain such as healthcare processes are developed, wherein three service stages are presented sequentially.

Just like supply chains with finished goods inventory, healthcare service supply chains also show dynamic behaviour. Comparing options, service reduction, and capacity adjustment delays showed that reducing capacity adjustment and service delays gives better results.

The study is confined to health service‐oriented supply chains. Further work includes extending the study to service‐oriented supply chains with parallel processing, i.e. having more than one stage to perform a similar operation and also to study the behaviour in service‐oriented supply chains that have re‐entrant orders and applications. Specific case studies can also be developed to reveal factors relevant to particular service‐oriented supply chains.

The paper explains the bullwhip effect in healthcare service‐oriented supply chains. Reducing stages and capacity adjustment are strategic options for service‐oriented supply chains.

The paper throws light on policy options for managing healthcare service‐oriented supply chain dynamics.

Based on the dynamic capability theory, our study tries to explore the mediator mechanism of service supply chain dynamic capability between market orientation and service innovation performance, as well as the boundary conditions in which service supply chain dynamic capability plays a role, in order to reveal the key elements and their mechanisms for manufacturing enterprises to improve service performance.

With a total of 317 valid questionnaires, structural equation modeling (SEM) was used to test the research model and hypotheses.

The empirical results confirm that the three types of service supply chain dynamic capability (environment insight capability, resource integration capability and resource reconfiguration capability) can partially mediate the relationship between firm market orientation (responsive and proactive market orientations) and service innovation performance. In addition, supply chain collaboration has different types of moderator effects on the relationship between the three types of service supply chain dynamic capability and service innovation performance.

This research discovers that market orientation and dynamic capability are the key factors leading to high service performance and reveals the mediating role of service supply chain dynamic capability between market orientation and service innovation performance. Moreover, this research explores the moderating role of supply chain collaboration in service supply chain resource reconfiguration capability and service innovation performance.

This study aims to contribute to the scholarly fields of supply chain management (SCM) and service-dominant logic (SDL) by conducting a systematic literature review on business-to-business (B2B) marketing and SCM studies.

After the collection and refinement of 127 articles on SDL and SCM interface, descriptive and thematic analyses were applied to discover the current situation and the existing research streams in the literature.

The SDL-SCM literature focuses on five main research streams which are value co-creation and value-in-use, integration and relationship management, resource sharing, servitization and service supply chains. Each of them are explored in depth, and future research opportunities are proposed.

The research is limited with the selected articles. Future scholarly attention to the intersection between SDL and SCM will enhance the knowledge on these fields.

The study contributes to both of these fields by summarizing the existing scholarly research and proposing research opportunities for scholars. It is one of the first efforts to systematically review the interface between SCM and SDL.

The purpose of this paper is to explore servitization in the context of the service supply chain, particularly the effects of the relationship between the subsystem supplier and the end user on the supplier's as well as on the supply chain's ability to provide industrial services. In addition, it aims to present a solution to overcome the challenges of lack of this relationship.

A case study incorporating an explorative design science approach identifies a theoretically novel and practically relevant problem in the field of service supply chain management. The study combines empirical data collection; systematic conceptualization of means and ends; evaluation of proposed solutions in iterative‐ and action‐oriented cycles; and theoretical explanation of the observed phenomena and outcomes.

By establishing a triadic operational model with an integrator and end user, the subsystem supplier can servitize within a supply chain in which the end user relationship is controlled by the integrator. This enables the combining of critical service provision capabilities: supplier's maintenance‐related capabilities and integrator's end user access.

Further research is needed to determine the importance of managing the transition to subsystem suppliers in different types of industrial service supply chains. Because these observations and proposals are based on a single case study, the authors cannot draw conclusions as to how they apply to manufacturers in different problem situations.

The paper presents a decision‐making procedure that describes how a subsystem supplier opting for cooperation in the service supply chain can formulate a coherent set of triadic operational models with intermediaries and end users.

The paper shows how servitization takes place on supply chain level.