Search results1 – 1 of 1
The purpose of this study is to investigate the aesthetic blackening coating formed by a hydrothermal process, focusing on the formation of magnetite and the oxide…
The purpose of this study is to investigate the aesthetic blackening coating formed by a hydrothermal process, focusing on the formation of magnetite and the oxide adhesion for improving the corrosion resistance of the steel.
The aesthetic black coating was applied on AISI 4140 steel using a hydrothermal process with a non-toxic solution consisted of ferrous sulphate hydrate (FeSO4·7H2O), sodium hydroxide (NaOH) and hydrazine hydrate (N2H4·H2O). Upon process parameters temperature and time, the morphology of the coatings and oxidation kinetics were investigated by using scanning electron microscopy and X-ray diffraction (XRD) analysis. Furthermore, the samples with coatings were subjected to the adhesion test using a tensile testing machine equipped with a charge-coupled device (CCD) camera.
From the formation parameters due to temperature and time for the conversion coatings, it was found that the oxidation kinetics had special characteristics which were in accordance with a linear rate law and Arrhenius relation. For the samples blackened, the XRD analysis results revealed that the magnetite was successfully formed on the surface of the steel. On the other hand, increasing the blackening temperature worsened the scale adhesion as observed by the lower strain provoking the first spallation and the higher sensitivity of the oxide to spall out with the imposed strain.
The effects of parameters of the formation of conversion coatings were investigated to understand the kinetics of the coatings. Furthermore, a tensile adhesion test using a CCD camera was applied to evaluate the adhesion between the native oxide formed by conversion coating.