Search results

Vision, audition, olfactory, tactile and taste are five important senses that human uses to interact with the real world. As facing more and more complex environments, a sensing system is essential for intelligent robots with various types of sensors. To mimic human-like abilities, sensors similar to human perception capabilities are indispensable. However, most research only concentrated on analyzing literature on single-modal sensors and their robotics application.

This study presents a systematic review of five bioinspired senses, especially considering a brief introduction of multimodal sensing applications and predicting current trends and future directions of this field, which may have continuous enlightenments.

This review shows that bioinspired sensors can enable robots to better understand the environment, and multiple sensor combinations can support the robot’s ability to behave intelligently.

The review starts with a brief survey of the biological sensing mechanisms of the five senses, which are followed by their bioinspired electronic counterparts. Their applications in the robots are then reviewed as another emphasis, covering the main application scopes of localization and navigation, objection identification, dexterous manipulation, compliant interaction and so on. Finally, the trends, difficulties and challenges of this research were discussed to help guide future research on intelligent robot sensors.

Minimizing the energy consumption in a wireless sensor node is important for lengthening the lifetime of a battery. Radio transmission is the most energy-consuming task in a wireless sensor node, and by compressing the sensor data in the online mode, it is possible to reduce the number of transmission periods. This study aims to demonstrate that temporal compression methods present an effective method for lengthening the lifetime of a battery-powered wireless sensor node.

In this study, the energy consumption of LoRa-based sensor node was evaluated and measured. The experiments were conducted with different LoRaWAN data rate parameters, with and without compression algorithms implemented to compress sensor data in the online mode. The effect of temporal compression algorithms on the overall energy consumption was measured.

Energy consumption was measured with different LoRaWAN spreading factors. The LoRaWAN transmission energy consumption significantly depends on the spreading factor used. The other significant factors affecting the LoRa-based sensor node energy consumption are the measurement interval and sleep mode current consumption. The results show that temporal compression algorithms are an effective method for reducing the energy consumption of a LoRa sensor node by reducing the number of LoRa transmission periods.

This paper presents with a practical case that it is possible to reduce the overall energy consumption of a wireless sensor node by compressing sensor data in online mode with simple temporal compression algorithms.

Due to its boundless potential applications, Wireless Sensor Networks have been subject to much research in the last two decades. WSNs are often deployed in remote environments making replacement of batteries not feasible. Low energy consumption being of prime requisite led to the development of energy-efficient routing protocols. The proposed routing algorithms seek to prolong the lifetime of sensor nodes in the relatively unexplored area of 3D WSNs. The schemes use chain-based routing technique PEGASIS as basis and employ genetic algorithm to build the chain instead of the greedy algorithm. Proposed schemes will incorporate an energy and distance aware CH selection technique to improve load balancing. Clustering of the network is also implemented to reduce number of nodes in a chain and hence reduce delay. Simulation of our proposed protocols is carried out for homogeneous networks considering separately cases for a static base-station inside and outside the network. Results indicate considerable improvement in lifetime over PEGASIS of 817% and 420% for base station inside and outside the network respectively. Residual energy and delay performance are also considered.

This pragmatic research paper aims to unravel the smart vision-based method (SVBM), an AI program to correlate the computer vision (recorded and live videos using mobile and embedded cameras) that aids in manual lifting human pose deduction, analysis and training in the construction sector.

Using a pragmatic approach combined with the literature review, this study discusses the SVBM. The research method includes a literature review followed by a pragmatic approach and lab validation of the acquired data. Adopting the practical approach, the authors of this article developed an SVBM, an AI program to correlate computer vision (recorded and live videos using mobile and embedded cameras).

Results show that SVBM observes the relevant events without additional attachments to the human body and compares them with the standard axis to identify abnormal postures using mobile and other cameras. Angles of critical nodal points are projected through human pose detection and calculating body part movement angles using a novel software program and mobile application. The SVBM demonstrates its ability to data capture and analysis in real-time and offline using videos recorded earlier and is validated for program coding and results repeatability.

Literature review methodology limitations include not keeping in phase with the most updated field knowledge. This limitation is offset by choosing the range for literature review within the last two decades. This literature review may not have captured all published articles because the restriction of database access and search was based only on English. Also, the authors may have omitted fruitful articles hiding in a less popular journal. These limitations are acknowledged. The critical limitation is that the trust, privacy and psychological issues are not addressed in SVBM, which is recognised. However, the benefits of SVBM naturally offset this limitation to being adopted practically.

The theoretical and practical implications include customised and individualistic prediction and preventing most posture-related hazardous behaviours before a critical injury happens. The theoretical implications include mimicking the human pose and lab-based analysis without attaching sensors that naturally alter the working poses. SVBM would help researchers develop more accurate data and theoretical models close to actuals.

By using SVBM, the possibility of early deduction and prevention of musculoskeletal disorders is high; the social implications include the benefits of being a healthier society and health concerned construction sector.

Human pose detection, especially joint angle calculation in a work environment, is crucial to early deduction of muscoloskeletal disorders. Conventional digital technology-based methods to detect pose flaws focus on location information from wearables and laboratory-controlled motion sensors. For the first time, this paper presents novel computer vision (recorded and live videos using mobile and embedded cameras) and digital image-related deep learning methods without attachment to the human body for manual handling pose deduction and analysis of angles, neckline and torso line in an actual construction work environment.

The purpose of this paper is to expand current knowledge about the recent trend of wearable technology to assess both its potential in the work environment and the challenges concerning the utilisation of wearables in the workplace.

After establishing exclusion and inclusion criteria, an independent systematic search of the ACM Digital Library, IEEE Xplore, ScienceDirect and Web of Science databases for relevant studies was performed. Out of a total of 359 articles, 34 met the selection criteria.

This review identifies 23 categories of wearable devices. Further categorisation of the devices based on their utilisation shows they can be used in the work environment for activities including monitoring, augmenting, assisting, delivering and tracking. The review reveals that wearable technology has the potential to increase work efficiency among employees, improve workers’ physical well-being and reduce work-related injuries. However, the review also reveals that technological, social, policy and economic challenges related to the use of wearable devices remain.

Many studies have investigated the benefits of wearable devices for personal use, but information about the use of wearables in the work environment is limited. Further research is required in the fields of technology, social challenges, organisation strategies, policies and economics to enhance the adoption rate of wearable devices in work environments.

Previous studies indicate that occupational stress and injuries are detrimental to employees’ health; this paper analyses the use of wearable devices as an intervention method to monitor or prevent these problems. Introducing a categorisation framework during implementation may help identify which types of device categories are suitable and could be beneficial for specific utilisation purposes, facilitating the adoption of wearable devices in the workplace.

Wireless sensor networks (WSNs) are periodically collecting data through randomly dispersed sensors (motes), which typically consume high energy in radio communication that mainly leans on data transmission within the network. Furthermore, dissemination mode in WSN usually produces noisy values, incorrect measurements or missing information that affect the behaviour of WSN. In this article, a Distributed Data Predictive Model (DDPM) was proposed to extend the network lifetime by decreasing the consumption in the energy of sensor nodes. It was built upon a distributive clustering model for predicting dissemination-faults in WSN. The proposed model was developed using Recursive least squares (RLS) adaptive filter integrated with a Finite Impulse Response (FIR) filter, for removing unwanted reflections and noise accompanying of the transferred signals among the sensors, aiming to minimize the size of transferred data for providing energy efficient. The experimental results demonstrated that DDPM reduced the rate of data transmission to ∼20%. Also, it decreased the energy consumption to 95% throughout the dataset sample and upgraded the performance of the sensory network by about 19.5%. Thus, it prolonged the lifetime of the network.

Crystallization is the process widely used for components separation and solids purification. The systems for crystallization process evaluation applied so far, involve numerous non-invasive tomographic measurement techniques which suffers from some reported problems. The purpose of this paper is to show the abilities of three-dimensional Electrical Capacitance Tomography (3D ECT) in the context of non-invasive and non-intrusive visualization of crystallization processes. Multiple aspects and problems of ECT imaging, as well as the computer model design to work with the high relative permittivity liquids, have been pointed out.

To design the most efficient (from a mechanical and electrical point of view) 3D ECT sensor structure, the high-precise impedance meter was applied. The three types of sensor were designed, built, and tested. To meet the new concept requirements, the dedicated ECT device has been constructed.

It has been shown that the ECT technique can be applied to the diagnosis of crystallization. The crystals distribution can be identified using this technique. The achieved measurement resolution allows detecting the localization of crystals. The usage of stabilized electrodes improves the sensitivity of the sensor and provides the images better suitable for further analysis.

The dedicated 3D ECT sensor construction has been proposed to increase its sensitivity in the border area, where the crystals grow. Regarding this feature, some new algorithms for the potential field distribution and the sensitivity matrix calculation have been developed. The adaptation of the iterative 3D image reconstruction process has also been described.

Mobile phone-based human activity recognition (HAR) consists of inferring user’s activity type from the analysis of the inertial mobile sensor data. This paper aims to mainly introduce a new classification approach called adaptive k-nearest neighbors (AKNN) for intelligent HAR using smartphone inertial sensors with a potential real-time implementation on smartphone platform.

The proposed method puts forward several modification on AKNN baseline by using kernel discriminant analysis for feature reduction and hybridizing weighted support vector machines and KNN to tackle imbalanced class data set.

Extensive experiments on a five large scale daily activity recognition data set have been performed to demonstrate the effectiveness of the method in terms of error rate, recall, precision, F1-score and computational/memory resources, with several comparison with state-of-the art methods and other hybridization modes. The results showed that the proposed method can achieve more than 50% improvement in error rate metric and up to 5.6% in F1-score. The training phase is also shown to be reduced by a factor of six compared to baseline, which provides solid assets for smartphone implementation.

This work builds a bridge to already growing work in machine learning related to learning with small data set. Besides, the availability of systems that are able to perform on flight activity recognition on smartphone will have a significant impact in the field of pervasive health care, supporting a variety of practical applications such as elderly care, ambient assisted living and remote monitoring.

The purpose of this study is to build and test an accurate offline model by using only a compact training data that can reduce the computational and memory complexity of the system. This provides grounds for developing new innovative hybridization modes in the context of daily activity recognition and smartphone-based implementation. This study demonstrates that the new AKNN is able to classify the data without any training step because it does not use any model for fitting and only uses memory resources to store the corresponding support vectors.

The purpose of this paper is to solve the problem that the location of the initiation point cannot be measured accurately in the shallow underground space, this paper proposes a method, which is based on fusion of multidimensional vibration sensor information, to locate single shallow underground sources.

First, in this paper, using the characteristics of low multipath interference and good P-wave polarization in the near field, the adaptive covariance matrix algorithm is used to extract the polarization angle information of the P-wave and the short term averaging/long term averaging algorithm is used to extract the first break travel time information. Second, a hybrid positioning model based on travel time and polarization angle is constructed. Third, the positioning model is taken as the particle update fitness function of quantum-behaved particle swarm optimization and calculation is performed in the hybrid positioning model. Finally, the experiment verification is carried out in the field.

The experimental results show that, with root mean square error, spherical error probable and fitness value as evaluation indicators, the positioning performance of this method is better than that without speed prediction. And the positioning accuracy of this method has been improved by nearly 30%, giving all of the three tests a positioning error within 0.5 m and a fitness less than 1.

This method provides a new idea for high-precision positioning of shallow underground single source. It has a certain engineering application value in the fields of directional demolition of engineering blasting, water inrush and burst mud prediction, fuze position measurement, underground initiation point positioning of ammunition, mine blasting monitoring and so on.

The fashion sector is complex. It involves multiple actors with distinct and potentially conflicting interests, forming a value ecosystem. Thus, knowing the interested parties and belonging to the fashion sector may be a means to promote technological innovation, such as products with wearables. The purpose of this paper to identify the participants of the fashion ecosystem from the perspective of wearable technologies and develop a conceptual model.

The present work aims to identify the participants (actors) and develop a conceptual model of the fashion ecosystem from the perspective of wearable technologies. The systematic literature review is the recommended method to qualitatively analyze documents and identify the interested parties (actors) in the fashion sector in order to design the proposed conceptual model.

From the studies, the conceptual model of the fashion value ecosystem was designed, and the wearable product was considered its core business. The studies identified addressed ecosystems of fashion value in general but not specific to wearable products and their relations with other complementary industries.

The model was designed using secondary data only. Its validation is relevant through interviews with experts.

In terms of relevance, when conducting a systematic literature review, there were no studies that included wearable technologies in the fashion ecosystems discussed and their relations with other industries. The topic of wearables is an emerging subject that needs further research aiming to insert this technology in productive sectors.