Search results

Basically, connections are used to transfer the force supported by structural members to other parts of the structure. The flush end-plate bolted beam to column connection is one type that has been widely used because of its simplicity in fabrication and rapid site erection. The purpose of this study is to determine the moment-rotation curve, moment of resistance (MR) and mode of failure, and the results were compared with existing results for normal flat web connections.

In this study, the connection modeled was the flush end-plate welded with triangular web profile (TriWP) steel beam section and then bolted to a UKC column flange. The bolted flush end-plate semi-rigid beam to column connection was modeled using finite element software. The specimen was modeled using LUSAS 14.3 finite element software, with dimensions and parameters of the finite element model sizes being 200 × 200 × 49.9 UKC, 200 × 100 × 17.8 UKB and 200 × 100 with a thickness of 20 mm for the endplate.

It can be concluded that the MR obtained from the TriWP steel beam section is different from that of the normal flat web steel beam by 28%. The value of MR for the TriWP beam section is lower than that of the normal flat web beam section, but the moment ultimate is higher by 21% than the normal flat web. Therefore, it can be concluded that the TriWP section can resist more acting force than the normal flat web section and is suitable to be used as a new proposed shape to replace the normal flat web section for a certain steel structure based on the end-plate connection behavior.

As a result, the TriWP section has better performance than the flat web section in resisting MR behavior.

Top-seat angle connection is known as one of the usual uncomplicated beam-to-column joints used in steel structures. This article investigates the fire performance of welded top-seat angle connections.

A finite element (FE) model, including nonlinear contact interactions, high-temperature properties of steel, and material and geometric nonlinearities was created for accomplishing the fire performance analysis. The FE model was verified by comparing its simulation results with test data. Using the verified model, 24 steel-framed top-seat angle connection assemblies are modeled. Parametric studies were performed employing the verified FE model to study the influence of critical factors on the performance of steel beams and their welded angle joints.

The results obtained from the parametric studies illustrate that decreasing the gap size and the top angle size and increasing the top angles thickness affect fire behavior of top-seat angle joints and decrease the beam deflection by about 16% at temperatures beyond 570 °C. Also, the fire-resistance rating of the beam with seat angle stiffener increases about 15%, compared to those with and without the web stiffener. The failure of the beam happens when the deflections become more than span/30 at temperatures beyond 576 °C. Results also show that load type, load ratio and axial stiffness levels significantly control the fire performance of the beam with top-seat angle connections in semi-rigid steel frames.

Development of design methodologies for these joints and connected beam in fire conditions is delayed by current building codes due to the lack of adequate understanding of fire behavior of steel beams with welded top-seat angle connections.

In fire condition, the time to failure of a timber connection is mainly reliant on the wood charring rate, the strength of the residual wood section, and the limiting temperature of the steel connectors involved in the connection. The purpose of this study is to experimentally investigate the effects of loaded bolt end distance, number of bolt rows, and the existence of perpendicular-to-wood grain reinforcement on the structural fire behavior of semi-rigid glued-laminated timber (glulam) beam-to-column connections that used steel bolts and concealed steel plate connectors.

In total, 16 beam-to-column connections, which were fabricated in wood-steel-wood bolted connection configurations, in eight large-scale sub-frame test assemblies were exposed to elevated temperatures that followed CAN/ULC-S101 standard time-temperature curve, while being subjected to monotonic loading. The beam-to-column connections of four of the eight test assemblies were reinforced perpendicular to the wood grain using self-tapping screws (STS). Fire tests were terminated upon achieving the failure criterion, which predominantly was dependent on the connection’s maximum allowed rotation.

Experimental results revealed that increasing the number of bolt rows from two to three, each of two bolts, increased the connection’s time to failure by a greater time increment than that achieved by increasing the bolt end distance from four- to five-times the bolt diameter. Also, the use of STS reinforcement increased the connection’s time to failure by greater time increments than those achieved by increasing the number of bolt rows or the bolt end distance.

The invaluable experimental data obtained from this study can be effectively used to provide insight and better understanding on how mass-timber glulam bolted connections can behave in fire condition. This can also help in further improving the existing design guidelines for mass-timber structures. Currently, beam-to-column wood connections are designed mainly as axially loaded connections with no guidelines available for determining the fire resistance of timber connections exerting any degree of moment-resisting capability.

To explore the economical and reasonable semi-rigid permeable base layer ratio, solve the problems caused by rainwater washing over the pavement base layer on the slope, improve its drainage function, improve the water stability and service life of the roadbed pavement and promote the application of semi-rigid permeable base layer materials in the construction of asphalt pavement in cold regions.

In this study, three semi-rigid base course materials were designed, the mechanical strength and drainage properties were tested and the effect and correlation of air voids on their performance indexes were analyzed.

It was found that increasing the cement content increased the strength but reduced the air voids and water permeability coefficient. The permeability performance of the sandless material was superior to the dense; the performance of the two sandless materials was basically the same when the cement content was 7%. Overall, the skeleton void (sand-containing) type gradation between the sandless and dense types is more suitable as permeable semi-rigid base material; its gradation is relatively continuous, with cement content? 4.5%, strength? 1.5 MPa, water permeability coefficient? 0.8 cm/s and voids of 18–20%.

The study of permeable semi-rigid base material with large air voids could help to solve the problems of water damage and freeze-thaw damage of the base layer of asphalt pavements in cold regions and ensure the comfort and durability of asphalt pavements while having good economic and social benefits.

In this study, the application of a novel combined steel curved damper (SCD) and steel plate shear wall (SPSW) system in the 5-, 10- and 15-storey steel moment-resisting frames (SMR) subjected to earthquake excitation has been investigated. The proposed system is called here as the SMR-WD (steel moment resisting–wall damper).

At the beginning of this research, an SMR-W and an SMR-D are separately modeled in ABAQUS software and verified against the available experimental data. After that, three different heights SMR-WD systems (5-, 10- and 15-storey) are designed and simulated. Then, their performances are examined and compared to the corresponding SMR-W under the effects of six actual earthquake records.

The obtained results show that the proposed system increases the mean values of the base shear for 5-, 10- and 15-storey SMR-WD equal to 27, 20.15 and 16.51%, respectively compared to the corresponding SMR-W. Moreover, this system reduces the drift of the floors so that the reduction in the average values of maximum drift for 5-, 10- and 15-storey SMR-WD is equal to 10, 7 and 29%, respectively with respect to the corresponding SMR-W. The results also reveal that the considered system dissipates more energy than SMR-W so that the increase in the mean values of the energy absorption for 5-, 10- and 15-storey SMR-WD is 30.8, 25.6 and 41.3%, respectively when compared to the SMR-W. Furthermore, it is observed that SMR-WD has a positive effect on the seismic performance of the link beams and panel zones of the frames. By increasing the height of the structure in the SMR-WD, the energy dissipation and base shear force increases and the drift of floors decreases. Hereupon, the proposed SMR-WD system is more useful for tall buildings than SMR-W frames.

For the first time, the application of a novel combined steel curved damper (SCD) and steel plate shear wall (SPSW) system in the 5-, 10- and 15-storey steel moment-resisting frames (SMR) subjected to earthquake excitation has been investigated.

Recently, the utilization of cold-formed steel (CFS) roof truss systems and different types of other combination structural support systems, such as concrete or hot-rolled steel support, becomes more frequently used. This paper aims to identify the load transfer characteristics of three different design details for cold-formed truss to supporting system connections and to propose simplified modelling approach for practices.

Simplification modelling of connection design could be proposed for practical purpose based on the load transfer characteristics obtained from detailed study using finite element method. A cold-formed roof truss system with connection is modelled using line elements. However, the supporting system is not modelled in this work. Three types of connection involve, which are five pieces of CFS L-angle brackets, one-piece of CFS L-angle brackets and three types of bolts connection are modelled.

The results of analysis show that the connections located on the loaded side experienced higher reactions than those far from loaded side. From the result, it is also found that the option of “Fixed But” support condition in STAAD.Pro with translational degree of freedom being restrained is the most suitable way to represent the CFS L-angle brackets design for Type 1 connection for use in truss modelled using line elements.

Such increase in usage necessitates an appropriate connection detailing depending on the behaviour of the connection.

Elevated temperature material properties are essential in predicting structural member's behavior in high-temperature exposures such as fire. Even though experimental methodologies are available to determine these properties, advanced equipment with high costs is required to perform those tests. Therefore, performing those experiments frequently is not feasible, and the development of numerical techniques is beneficial. A numerical technique is proposed in this study to determine the temperature-dependent thermal properties of the material using the fire test results based on the Artificial Neural Network (ANN)-based Finite Element (FE) model.

An ANN-based FE model was developed in the Matlab program to determine the elevated temperature thermal diffusivity, thermal conductivity and the product of specific heat and density of a material. The temperature distribution obtained from fire tests is fed to the ANN-based FE model and material properties are predicted to match the temperature distribution.

Elevated temperature thermal properties of normal-weight concrete (NWC), gypsum plasterboard and lightweight concrete were predicted using the developed model, and good agreement was observed with the actual material properties measured experimentally. The developed method could be utilized to determine any materials' elevated temperature material properties numerically with the adequate temperature distribution data obtained during a fire or heat transfer test.

Temperature-dependent material properties are important in predicting the behavior of structural elements exposed to fire. This research study developed a numerical technique utilizing ANN theories to determine elevated temperature thermal diffusivity, thermal conductivity and product of specific heat and density. Experimental methods are available to evaluate the material properties at high temperatures. However, these testing equipment are expensive and sophisticated; therefore, these equipment are not popular in laboratories causing a lack of high-temperature material properties for novel materials. However conducting a fire test to evaluate fire performance of any novel material is the common practice in the industry. ANN-based FE model developed in this study could utilize those fire testing results of the structural member (temperature distribution of the member throughout the fire tests) to predict the material's thermal properties.

This study aimed to determine the expectations of students from mathematics teachers in the planning phase of lesson study (LS) in mathematics classrooms.

This study reported only a part of large-scale action research. The participants were Grade 8 students selected by the convenience sampling method. The data were obtained through open-ended questions. The content analysis method was used to analyze the data.

Four categories emerged: connection, technology-supported teaching, use of concrete materials, practice, and teacher behavior and teaching style.

This study reveals how students in a different culture and education system, such as Türkiye, want to learn mathematics in the LS process of Japanese origin. It also gives some important clues for applying LS in a different culture.

This study may attract the attention of educational stakeholders who want to implement LS in mathematics classrooms by considering student perspectives.

Due to the nature of LS, this study may emphasize teacher–student and teacher–teacher interactions. Thus, it can draw attention to the importance of social learning environments where students take responsibility and interact.

This study emphasizes the importance of listening to student voices in LS. Some ideas about mathematics teaching in Turkey should also be given. Finally, it can provide a good basis for understanding and comparing LS practices in different cultures and understandings.

Present study aimed to integrate Geographic Information Systems (GIS) and Building Information Modeling (BIM) in conjunction with multicriteria decision-making (MCDM) to enhance infrastructure investment planning.

This analysis combines GIS databases with BIM simulations for a novel highway project. Around 150 potential alternatives were simulated, narrowed to 25 more effective routes and 3 options underwent in-depth analysis using PROMETHEE method for decision-making, based on environmental, cost and safety criteria, allowing for comprehensive cross-perspective comparisons.

A comprehensive framework proposed was validated through a case study. Demonstrating its adaptability with customizable parameters. It aids decision-making, cost estimation, environmental impact analysis and outcome prediction. Considering these critical factors, this study holds the potential to advance new techniques for assessment and planning railways, power lines, gas and water.

The study acknowledges limitations in GIS data quality, particularly in underdeveloped areas or regions with limited technology access. It also overlooks other pertinent variables, like social, economic, political and cultural issues. Thus, conclusions from these simulations may not entirely represent reality or diverse potential scenarios.

The proposed method automates decision-making, reducing subjectivity, aids in selecting effective alternatives and considers environmental criteria to mitigate negative impacts. Additionally, it minimizes costs and risks while demonstrating adaptability for assessing diverse infrastructures.

By integrating GIS and BIM data to support a MCDM workflow, this study proposes to fill the existing research gap in decision-making prioritization and mitigate subjective biases.

This study aims to perform dynamic response analysis of damaged rigid-frame bridges under multiple moving loads using analytical based transfer matrix method (TMM). The effects of crack depth, moving load velocity and damping on the dynamic response of the model are discussed. The dynamic amplifications are investigated for various damage scenarios in addition to displacement time-histories.

Timoshenko beam theory (TBT) and Rayleigh-Love bar theory (RLBT) are used for bending and axial vibrations, respectively. The cracks are modeled using rotational and extensional springs. The structure is simplified into an equivalent single degree of freedom (SDOF) system using exact mode shapes to perform forced vibration analysis according to moving load convoy.

The results are compared to experimental data from literature for different damaged beam under moving load scenarios where a good agreement is observed. The proposed approach is also verified using the results from previous studies for free vibration analysis of cracked frames as well as dynamic response of cracked beams subjected to moving load. The importance of using TBT and RLBT instead of Euler–Bernoulli beam theory (EBT) and classical bar theory (CBT) is revealed. The results show that peak dynamic response at mid-span of the beam is more sensitive to crack length when compared to moving load velocity and damping properties.

The combination of TMM and modal superposition is presented for dynamic response analysis of damaged rigid-frame bridges subjected to moving convoy loading. The effectiveness of transfer matrix formulations for the free vibration analysis of this model shows that proposed approach may be extended to free and forced vibration analysis of more complicated structures such as rigid-frame bridges supported by piles and having multiple cracks.