Search results
1 – 10 of 23Wind tunnel tests of wing/store system flutter semi‐active suppression are shown in this paper. A wind tunnel test model for semi‐active suppression with an Electro‐Magnetic…
Abstract
Wind tunnel tests of wing/store system flutter semi‐active suppression are shown in this paper. A wind tunnel test model for semi‐active suppression with an Electro‐Magnetic damper and circuit control system are designed and worked out .The results of these wind tunnel tests show that the flutter response of wing/store system can be suppressed and the method of the tests is reasonable.
Details
Keywords
S. Sarath and P. Sam Paul
A new cutting tool is always well-defined and sharp at the onset of the metal cutting process and gradually losses these properties as the machining process advances. Similarly…
Abstract
Purpose
A new cutting tool is always well-defined and sharp at the onset of the metal cutting process and gradually losses these properties as the machining process advances. Similarly, at the beginning of the machining process, amplitude of tool vibrations is considerably low and it increases gradually and peaks at the end of the service period of the cutting tool while machining. It is significant to provide a corresponding real-time varying damping to control this chatter, which directly influences accuracy and quality of productivity. This paper aims to review the literature related to the application of smart fluid to control vibration in metal cutting and also focused on the challenges involved in the implementation of active control system during machining process.
Design/methodology/approach
Smart dampers, which are used as semi-active and active dampers in metal cutting, were reviewed and the research studies carried out in the field of the magnetorheological (MR) damper were concentrated. In smart materials, MR fluids possess some disadvantages because of their sedimentation of iron particles, leakage and slow response time. To overcome these drawbacks, new MR materials such as MR foam, MR elastomers, MR gels and MR plastomers have been recommended and suggested. This review intents to throw light into available literature which exclusively deals with controlling chatter in metal cutting with the help of MR damping methods.
Findings
Using an MR damper popularly known for its semi-active damping characteristics is very adaptable and flexible in controlling chatter by providing damping to real-time amplitudes of tool vibration. In the past, many researchers have attempted to implement MR damper in metal cutting to control vibration and were successful. Various methods with the help of MR fluid are illustrated.
Research limitations/implications
A new cutting tool is always well-defined and sharp at the onset of metal cutting process and gradually losses these properties as the machining process advances. Similarly, at the beginning of the machining process, amplitude of tool vibrations is considerably low and it increases gradually and peaks at the end of service period of cutting tool while machining. Application of MR damper along with the working methodology in metal cutting is presented, challenges met are analyzed and a scope for development is reviewed.
Practical implications
This study provides corresponding real-time varying damping to control tool vibration which directly influences accuracy and quality of productivity. Using an MR damper popularly known for its semi-active damping characteristics is very adaptable and flexible in controlling chatter by providing damping to real-time amplitudes of tool vibration.
Social implications
This study attempts to implement smart damper in metal cutting to control vibrations.
Originality/value
It is significant to provide corresponding real-time varying damping to control tool vibration which directly influences accuracy and quality of productivity.
Details
Keywords
Yaxing Ren, Ren Li, Xiaoying Ru and Youquan Niu
This paper aims to design an active shock absorber scheme for use in conjunction with a passive shock absorber to suppress the horizontal vibration of elevator cars in a smaller…
Abstract
Purpose
This paper aims to design an active shock absorber scheme for use in conjunction with a passive shock absorber to suppress the horizontal vibration of elevator cars in a smaller range and shorter time. The developed active shock absorber will also improve the safety and comfort of passengers driving in ultra-high-speed elevators.
Design/methodology/approach
A six-degree of freedom dynamic model is established according to the position and condition of the car. Then the active shock absorber and disturbance compensation-based adaptive control scheme are designed and simulated in MATLAB/Simulink. The results are analysed and compared with the traditional shock absorber.
Findings
The results show that, compared with traditional spring-based passive damping systems, the designed active shock absorber can reduce vibration displacement by 60%, peak acceleration by 50% and oscillation time by 2/3 and is more robust to different spring stiffness, damping coefficient and load.
Originality/value
The developed active shock absorber and its control algorithm can significantly reduce vibration amplitude and converged time. It can also adjust the damping strength according to the actual load of the elevator car, which is more suitable for high-speed elevators.
Details
Keywords
Syed Awais Ali Shah, Bingtuan Gao, Ajeet Kumar Bhatia, Chuande Liu and Arshad Rauf
Barge-type offshore floating wind turbine (OFWT) commonly exhibits an under-actuated phenomenon in an offshore environment, which leads to a potential vibration-damping hazard…
Abstract
Purpose
Barge-type offshore floating wind turbine (OFWT) commonly exhibits an under-actuated phenomenon in an offshore environment, which leads to a potential vibration-damping hazard. This article aims to provide a new robust output feedback anti-vibrational control scheme for the novel translational oscillator with rotational actuator (TORA) based five-degrees of freedom (5-DOF) barge-type OFWT in the presence of unwanted disturbances and modeling uncertainties.
Design/methodology/approach
In this paper, an active control technique called TORA has been used to design a 5-DOF barge-type OFWT model, where the mathematical model of the proposed system is derived by using Euler–Lagrange's equations. The robust hierarchical backstepping integral nonsingular terminal sliding mode control (HBINTSMC) with an adaptive gain is used in conjunction with extended order high gain observer (EHGO) to achieve system stabilization in the presence of unwanted disturbances and modeling uncertainties. The numerical simulations based on MATLAB/SIMULINK have been performed to demonstrate the feasibility and effectiveness of the proposed model and control law.
Findings
The numerical simulation results affirm the accuracy and efficiency of the proposed control law for the TORA based OFWT system. The results demonstrate that the proposed control law is robust against unwanted disturbances and uncertainties. The unknown states are accurately estimated by EHGO which enables the controller to exhibit improved stabilization performance.
Originality/value
A new mathematical model of the 5-DOF barge-type OFWT system based on TORA is the major contribution of this research paper. Furthermore, it provides a new adaptive anti-vibration control scheme by incorporating the EHGO for the proposed model.
Details
Keywords
Aalya Banu and Asan G.A. Muthalif
This paper aims to develop a robust controller to control vibration of a thin plate attached with two piezoelectric patches in the presence of uncertainties in the mass of the…
Abstract
Purpose
This paper aims to develop a robust controller to control vibration of a thin plate attached with two piezoelectric patches in the presence of uncertainties in the mass of the plate. The main goal of this study is to tackle dynamic perturbation that could lead to modelling error in flexible structures. The controller is designed to suppress first and second modal vibrations.
Design/methodology/approach
Out of various robust control strategies, μ-synthesis controller design algorithm has been used for active vibration control of a simply supported thin place excited and actuated using two piezoelectric patches. Parametric uncertainty in the system is taken into account so that the robust system will be achieved by maximizing the complex stability radius of the closed-loop system. Effectiveness of the designed controller is validated through robust stability and performance analysis.
Findings
Results obtained from numerical simulation indicate that implementation of the designed controller can effectively suppress the vibration of the system at the first and second modal frequencies by 98.5 and 88.4 per cent, respectively, despite the presence of structural uncertainties. The designed controller has also shown satisfactory results in terms of robustness and performance.
Originality/value
Although vibration control in designing any structural system has been an active topic for decades, Ordinary fixed controllers designed based on nominal parameters do not take into account the uncertainties present in and around the system and hence lose their effectiveness when subjected to uncertainties. This paper fulfills an identified need to design a robust control system that accommodates uncertainties.
Details
Keywords
The purpose of this paper is to use the NACA 0015 symmetric hydrofoil as the research subject and control cloud cavitation on hydrofoils.
Abstract
Purpose
The purpose of this paper is to use the NACA 0015 symmetric hydrofoil as the research subject and control cloud cavitation on hydrofoils.
Design/methodology/approach
Based on observed distribution of caudal fin spines on fish, a bionic structure of fin-like spines is arranged on the hydrofoil suction surface, which maintains the cavitation in a quasi-steady state stage by eliminating the cyclic shedding process of cloud cavitation. Based on the modified shear stress transport k-ω turbulence model and the Zwart–Gerber–Belamri cavitation model, this paper compares and analyzes the NACA 0015 hydrofoil and the bionic NACA 0015 hydrofoil under condition of an angle of attack of 8° and a cavitation number of 0.8.
Findings
The results show that the average drag of the hydrofoil is reduced but the lift is decreased, and the lift-drag ratio is increased after arranging the bionic structure. The bionic structure can effectively reduce the turbulent kinetic energy and make the flow more stable; it also can effectively control the hydrofoil surface side-entrant jet and the vortex shedding process of the near wall region.
Originality/value
Based on the above conclusions, the bionic structure of fin-like spines can achieve a significant passive control in the hydrofoil cloud cavitation process.
Details
Keywords
In real life, excitations are highly non-stationary in frequency and amplitude, which easily induces resonant vibration to structural responses. Conventional control algorithms in…
Abstract
Purpose
In real life, excitations are highly non-stationary in frequency and amplitude, which easily induces resonant vibration to structural responses. Conventional control algorithms in this case cannot guarantee cost-effective control effort and efficient structural response alleviation. To this end, this paper proposes a novel adaptive linear quadratic regulator (LQR) by integrating wavelet transform and genetic algorithm (GA).
Design/methodology/approach
In each time interval, multiresolution analysis of real-time structural responses returns filtered time signals dominated by different frequency bands. Minimization of cost function in each frequency band obtains control law and gain matrix that depend on temporal-frequency band, so suppressing resonance-induced filtered response signal can be directly achieved by regulating gain matrix in the temporal-frequency band, leading to emphasizing cost-function weights on control and state. To efficiently subdivide gain matrices in resonant and normal frequency bands, the cost-function weights are optimized by a developed procedure associated to genetic algorithm. Single-degree-of-freedom (SDOF) and multi-degree-of-freedom (MDOF) structures subjected to near- and far-fault ground motions are studied.
Findings
Resonant band requires a larger control force than non-resonant band to decay resonance-induced peak responses. The time-varying cost-function weights generate control force more cost-effective than time-invariant ones. The scheme outperforms existing control algorithms and attains the trade-off between response suppression and control force under non-stationary excitations.
Originality/value
Proposed control law allocates control force amounts depending upon resonant or non-resonant band in each time interval. Cost-function weights and wavelet decomposition level are formulated in an elegant manner. Genetic algorithm-based optimization cost-efficiently results in minimizing structural responses.
Details
Keywords
Abstract
Details
Keywords
Abstract
Details
Keywords
Mohamed Benadda, Ahmed Bouzidane, Marc Thomas and Raynald Guilbault
This paper aims to propose a new hydrostatic squeeze film damper compensated with electrorheological valve restrictors to control the nonlinear dynamic behavior of a rigid rotor…
Abstract
Purpose
This paper aims to propose a new hydrostatic squeeze film damper compensated with electrorheological valve restrictors to control the nonlinear dynamic behavior of a rigid rotor caused by high unbalance eccentricity ratio. To investigate the effect of electrorheological valve restrictors on the dynamic behavior of a rigid rotor, a nonlinear model is developed and presented.
Design/methodology/approach
The nonlinear results are compared with those obtained from a linear approach. The results show good agreement between the linear and nonlinear methods when the unbalanced force is small. The effects of unbalance eccentricity ratio and electric field on the vibration response and the bearing transmitted force are investigated using the nonlinear models.
Findings
The results of simulation performed that the harmonics generated by high unbalance eccentricities can be reduced by using hydrostatic squeeze film damper compensated with electrorheological valve restrictors.
Originality/value
The numerical results demonstrate that this type of smart hydrostatic squeeze film damper provides to hydrostatic designers a new bearing configuration suitable to control rotor vibrations and bearing transmitted forces, especially for high speed.
Details