Search results

Assessing the impact of hygiene factors on faculty motivation and satisfaction in online teaching will advance the literature. It will especially demystify that both factors (hygiene factors and motivator) can cause job satisfaction in online education. The purpose of this paper is to firstly determine the level of faculty motivation and satisfaction in online teaching. Secondly, this study analyses the extent to which hygiene factors affect motivation and faculty satisfaction with online teaching.

The population of this study consists of university faculty in Indonesia and Malaysia. The sample is randomly chosen in 50 higher education institutions in Indonesia and Malaysia. The sample size is 206. The participants completed a survey, including perceived student engagement, institutional support, motivation, faculty satisfaction and demographical questions. To test the model, PLS-SEM was used using SmartPLS3 software. The hygiene factors construct was operationalized as a second-order construct consisting of first-order construct: student engagement and institutional support.

There were no statistically significant differences concerning institutional support and motivation by country of residence. However, there were significant differences in student engagement and faculty satisfaction by country residence. Concerning satisfaction and motivation, the most satisfied and motivated was the faculty member in Indonesia. Hygiene factors were found as the antecedent to faculty motivation and faculty motivation multiplying hygiene factors' effect on job satisfaction. The results showed that student engagement has the highest impact on faculty satisfaction, followed by motivation. Work motivation mediates the relationship between hygiene factors and faculty satisfaction.

This study has limitations; firstly, causal inferences are not warranted as the data is cross-sectional. However, a future direction is to analyse the causal relationship between the hygiene factors, and motivation factors on faculty satisfaction using a formative first-order construct through a longitudinal study. Secondly, the results’ generalizability is another limitation of this study because the sample comprised only Indonesia and Malaysia faculty across 51 higher education institution in big cities in the island of Java in Indonesia and Malaysia peninsular only; however, the factors determined in this study represent the job-related aspects taken from the literature and the researchers’ experiences; other parts influence faculty satisfaction with online teaching. Therefore, identifying other elements is a future path.

When managers aim at increasing faculty satisfaction, the priority should be given to improve the performance of indicators with the highest effect but a relatively low in performance. All of this implies that higher education institution first needs to find ways to increase motivation by rewarding faculty in many forms, and improve the quality of instruction. Secondly, implementing policies and make some decisions that require an investment such as providing a learning management system.

Indonesia and Malaysia higher education institutions may ameliorate faculty satisfaction with online teaching in several ways. Firstly, before the online course begins, higher education institutions should attempt to have faculty believe teaching online is worthwhile and understand the institution itself also believes it is significant. Administer training for faculty, especially regarding increasing connections with and between students, gives faculty the time needed to design an online course and provide faculty with a course management system with multiple capabilities. Secondly, during the online course, higher education institutions should support technical issues and try to have faculty believe they have an accommodating work schedule and independence with the online course.

This research firstly contributes to the literature by establishing the relationship between hygiene factors and motivation, and hygiene factors and satisfaction, which did not exist according to the two-factor theory in the past. Secondly, the authors provide evidence of motivation constructs as a mediating variable. Thirdly, this study broadens the literature scope by including faculty in two countries (Indonesia and Malaysia). It includes faculty from 51 higher education systems (e.g. public and private four-year universities), incudes graduate school in seven big cities in two countries, Indonesia and Malaysia.

The ongoing business dynamics show two aspects for generating innovation: first, high-impact innovations are developed jointly by several actors, such as universities, enterprises, and governments. Second, startups are better suited to develop innovation during crises or periods of low growth as experienced at the moment. Based on these aspects and drawing on the constructs of the triple helix, this study analyzes the influence between the characteristics of the actors on the quality of the startup ecosystem from a global view.

The study examines the cross-section data of 35 countries between 2017 and 2018 and applies the partial least squares structural equation modeling (PLS-SEM) for assessing the relationships between the triple helix on the quality of the startup ecosystem on a country-level.

The findings suggest that each actor of the triple helix individually does not positively affect the quality of the startup ecosystem. Yet, when analyzing the actors jointly by creating a second-order latent variable (i.e. triple helix), the study found out that in this way, the triple helix construct has a positive effect on the quality of the startup ecosystem.

Although a large body of prior literature indicates the importance of generating interrelationships among the different entities involved in ecosystems, few studies provide empirical evidence from a global perspective of the need for these entities to act in an overlapping manner. The present study supports previous research and reinforces the importance of the triple helix for a more innovative environment.

The purpose of this paper is to provide valid and reliable constructs for lean manufacturing (LM) for assessing its implementation level in order to target areas of improvement.

Based on an extensive review on LM literature and content validity assessment from practitioners and academicians, nine LM constructs were identified. Measurement items for each construct were developed to become a complete questionnaire. The questionnaire booklets were distributed to large and discrete manufacturing companies in Indonesia. Out of 1,000 survey questionnaires sent, 236 usable responses were returned giving response rate of 23.60 percent. Subsequently, an empirical assessment on the constructs was done by using structural equation modeling approach.

The study identified the valid and reliable LM constructs, consisting of nine LM constructs and 64 measurement items. The study found that all the constructs are complementary and mutually supportive with each other. Indeed, it suggests the holistic implementation of all the LM practices.

Owing the time and resource constraint, this study only involved large and discrete process manufacturing industries in Indonesia. Hence, the generalization of the result is slightly limited. More studies in several different contexts are required.

This study provided a valuable tool for researchers for gaining deeper understanding regarding the LM and its implementation. For practitioners, it is useful to evaluate the degree of LM employment in their companies, to target area of improvement, as well as to take possible actions in attempting to enhance the organizational performance. More importantly, practitioners should adopt all the LM practices in a holistic manner.

This study is the first attempt to develop LM constructs for evaluating the LM implementation in Indonesia.

The study aims to test the applicability of a variant of the model proposed by Hockerts (2017) for assessing the social entrepreneurial intention (SEI) of male and female students. It extends the model by incorporating the university's environment and support system (ESS) as an additional more distal construct. The university's ESS, coupled with the experience with social, cultural and environmental issues can affect SEI by influencing the more proximal precursors of empathy towards others, perceived self-efficacy, perceived community support and social, cultural and environmental responsibility.

A structured non-disguised questionnaire was administered to students at a Canadian university. A sample of 485 usable responses was analysed by means of second-order structural equation modelling.

The results provide confirmation that the proposed model is a multi-group invariant and appropriate for analysing the SEI of male and female students. They also show that the university's ESS helps predict SEI indirectly through the complete mediation of the more proximal antecedents.

The questionnaire is limited to universities with social innovation and entrepreneurship initiatives.

Outcomes of the study can help universities assess the efficacy of their social innovation and entrepreneurship initiatives for instilling a social entrepreneurial mind-set in students. Consequently, universities will be better equipped to raise the perceptions of venture feasibility and desirability, thus increasing students' perceptions of opportunity.

The study advances the social entrepreneurial knowledge of the university's effect on the precursors of SEI.

Person-environment (PE) fit theory suggests that value congruence (fit) leads to the job pursuits intention (Cable and Judge, 1996) which is also influenced by cultural norms (Ma and Allen, 2009). Due to stringent job market condition along with its people, as a part of collectivistic culture, having poor self-concept consistency, value congruence may unfold different phenomenon in Indian context. Therefore, the present study intends to explore the existing fit theory on different cultural norms and different job market condition with entry-level job pursuits as participants.

The fit was measured both objectively and subjectively in a mixed method research design. Top 100 institutes ranked in NIRF (National Institutional Ranking Framework) (under Management category) were approached for data collection and 41 institutes agreed to participate. Data were collected in four phases from 2,714 entry-level job pursuits and domain experts based on web-based job advertisements. Krippendorff's alpha was calculated for measuring objective fit, and the subjective fit was measured through quadratic structural equation modeling with response surface analysis.

Findings revealed lack of value congruence objectively; and no influencing role of subjective fit in job pursuits intention. This indicated that neither Indian employers nor entry-level job pursuits were concerned about value congruence. The post-hoc analysis suggested that poor self-concept consistency as a cultural norm led to such atypical findings.

The present study suggests that fit may lead to different phenomena of entry-level job pursuits intention with different contextual and cultural norms.

The role of personal value systems as antecedents to risk has been largely ignored. Following Gigerenzer's view of ecological rationality, the authors argue an individual's personal value system serves as concrete motivations that guide risky choices and facilitate adaptation to one's environment.

The authors elicit risk attitudes using a satisficing-based risk elicitation method that exploits the idea of worst-case aspiration or minimum portfolio returns given a portfolio comprising a safe and risky prospect. The elicited worst-case aspiration allows for more descriptive and natural ways of characterizing attitudes to risk (i.e. satisficing measures of risk). Using the Schwartz Value Survey, the authors assess the relative importance individuals place on value systems, such as personal focus versus social focus. The authors argue that preference to value systems has linkages with the worst-case aspiration setting emphasized in the satisficing task.

This study’s findings suggest that individuals who are willing to give up higher potential returns to protect their downside risk (by setting higher worst-case aspiration) are positively associated with personal focus—concern about own outcomes than social focus—concern about the outcomes for others or established institutions.

Currently, the study’s setting is in the domain of financial decision-making. Going forward, milestones could be set for studying risky real-world choices by simply changing the risk measure in different contexts, such as job choices, education, health and social interactions.

This study contributes to the discussion on the psychometric structure of risk. Prescriptive benefits of satisficing as a positive heuristic, which is interpreted as setting achievable goals or aspiration levels, are extensive and recognized in various industries ranging from agriculture, airlines, insurance to financial advising. More recently, cognitive processes, such as emotions and personal value systems, are recognized as a type of social cognition that subserve heuristic functions that can guide behavior quickly and accurately.

The paper's purpose is to investigate the direct and indirect effects of industry competitive forces on strategy‐making and performance in small‐to‐medium‐sized manufacturing companies.

The paper's approach is a survey design with structural equation modeling used for hypotheses testing.

The findings provide strong support for the mitigating role of managerial action through the strategy‐making process and indications that this is true regardless of small‐to‐medium‐sized enterprise (SME) size. Also, automotive‐manufacturing SMEs seem to exhibit higher levels of competitive factors compared with non‐automotive manufacturing SMEs.

The major limitation of this research is that the survey was taken in the Mid‐western USA and involved only SME manufacturing organizations. The research should be extended to other geographic regions, industry types, and larger organizations.

Many small company managers feel that they have little impact on industry‐wide macro‐economic and industry‐specific forces. This research indicates that managers in SMEs can mitigate some of the negative effects of industry competitive factors through strategy‐making activities.

This research is unique in several ways. It is the only research that has clearly identified and successfully measured the impact of managerial action in SMEs. It demonstrates that managerial action can be measured by comparing the direct and indirect effects of industry competitive forces on performance. It further identifies the need for a self‐assessment tool to measure the effectiveness of managerial action of top managers in SMEs.

This paper aims to examine the relationship between surface acting (SA), deep acting (DA) and organizational commitment (OC).

Guided by affective events theory, the study adapted emotional labour scale and three components model to profile 373 teachers from 30 schools around Peninsular Malaysia. A list-based simple random sampling technique was used to select respondents. Structural equation modeling (SEM) was used to test hypotheses, and the proposed model was assessed through renowned fit indices.

OC was hypothesized as a second-order construct. SEM result indicates that both SA and DA have significant negative relationship with OC. Fit indices of the hypothesized model showed χ²/df ratio (560.069/265) = 2.113, RMSEA (0.055), and CFI (0.936). This result provides empirical support for the data collected.

The study provides new insight on the ongoing debate about SA and DA. Therefore, it advances body of research in this regard. The implication for HR managers is that strategic polices can be institutionalized to buffer the consequences of SA and DA. This is due to the fact that SA and DA may not be abolished for service employees like teachers. The practical implication for teachers is the understanding that emotional regulation process is inevitable because teaching is profoundly an emotional activity job. Besides being a cross-sectional study, the sampled population may have limited the study’s outcomes.

Given existing inconsistent results on the consequences of SA and DA, this study shows that not only SA can lead to negative after-effects, DA can also cause the same. Future study can explore spiritual intelligence to examine how best SA and DA can be performed at reduced consequences on OC.

This paper extends prior contingency-based management accounting research by building and empirically testing a theoretical model of contingency effects of supply chain integration (SCI) on the dimensions of management control system (MCS) and supply chain operational performance (SCOP) of hospitals in Ghana.

The paper uses factorial and structural path analysis of survey responses collected from 237 hospital accountants to model these relationships.

The results show that under strong SCI, the association between the MCS dimensions and hospital operational performance namely, cost effectiveness, flexibility and quality will be strengthened. In other words, the installation of MCS is more likely to provide a broad range of performance benefits for hospitals that align the four dimensions of the MCS with the dimensions of SCI (internal and external).

A limitation of this study would be its limited scope, as it focused only on hospitals in one developing country. Therefore, the results as indicated here may have limited generalizability to other industries and countries.

We theorize that using optimal amounts of the MCS, a high level of SCI is likely to reduce supply chain (SC) cost, improve speed, flexibility and quality of the SC among healthcare institutions in Ghana. Also, based on the direct impact on performance exhibited by the MCS dimensions, effective implementation of SCI decisions requires the use of optimal amounts of MCS for high performance.

The paper contributes to contingency-based management accounting research and provides theory-driven and empirically proven explanations for hospital managers in recognizing the importance of aligning the dimensions of SCI and MCS.

The purpose of this paper is to first, determine the implications of management control system (MCS) information characteristics for controlling the COVID-19 pandemic through four performance indicators (quality, speed of delivery, availability and cost-effectiveness) of the public health supply chain and second, the mediating effect of four dimensions (broad scope, timeliness, integration and aggregation) of the MCS on external integration, internal integration, customer integration and operational performance of public health institutions in Ghana.

Using covariance-based structural equations modelling and based on contingency theory, a hypothesized model was developed and tested. The sample involves a survey of 214 public health institutions in Ghana.

Both external and internal integration were found to have a significant positive effect on MCS information and, in turn, on the supply chain operational performance of public health institutions. Also, customer integration has a significant positive impact on the four dimensions with a corresponding impact on supply chain operational performance.

The paper provides practitioners and policymakers with the usefulness of the contingency paradigm in enhancing the supply chain network of public health institutions during epidemics, hence, the need to adopt and develop the contingency approach in designing MCS within the public health sector. Effective public health management through a collaborative process between stakeholders (suppliers, customers and personnel) will mitigate stockouts of medical supplies and systematic disruptions in the public health supply chain.

The MCSs – supply chain integration interaction on organizational performance is one of the areas that has received very little attention in the literature particularly in service-oriented organizations. In this regard, this paper represents one of the few studies in Africa that examines performance implications of MCS – supply chain nexus with respect to public health emergencies service-orientec organizations. The paper contributes to the literature by providing invaluable insights into the usefulness of the MCS in enhancing the supply chain performance of public health emergencies.