Search results

This paper aims to investigate the usability of the nickel copper zinc ferrite with the composition Ni_0.4Cu_0.2Zn_0.4Fe_1.98O_3.99 for the realization of high-temperature multilayer coils as discrete components and integrated, buried function units in low temperature cofired ceramics (LTCC).

LTCC tapes were cast and test components were produced as multilayer coils and as embedded coils in a dielectric tape. Different metallization pastes are compared. The properties of the components were measured at room temperature and higher temperature up to 250°C. The results are compared with simulation data.

The silver palladium paste revealed the highest inductance values within the study. The measured characteristics over a frequency range from 1 MHz to 100 MHz agree qualitatively with the measurements obtained from toroidal test samples. The inductance increases with increasing temperature and this influence is lower than 10%. The characteristic of embedded coils is comparable with this of multilayer components. The effective permeability of the ferrite material reaches values around 130.

The research results based on a limited number of experiments; therefore, the results should be verified considering higher sample sizes.

The results encourage the further investigation of the material Ni_0.4Cu_0.2Zn_0.4Fe_1.98O_3.99 for the use as high-temperature ferrite for the design of multilayer coils with an operation frequency in the range of 5-10 MHz and operation temperatures up to 250°C.

It is demonstrated for the first time, that the material Ni_0.4Cu_0.2Zn_0.4Fe_1.98O_3.99 is suitable for the realization of high-temperature multilayer coils and embedded coils in LTCC circuit carriers with high performance.

This study aims to develop a research agenda for the advancement of theory application in practical contexts by presenting a case study of the Engagement in Plastic-free Innovation for Change (EPIC) programme delivered by Plastic Oceans Australasia (POA).

EPIC is a behaviour change programme by POA that aims to reduce single-use plastic (SUP) consumption in workplaces. The study evaluates the programme’s impact on employee perceptions and actual behaviour through pre- and post-programme data collection in two Australian workplaces. Data was gathered via online surveys and waste audits and analysed using SPSS statistics and Excel.

The case study highlights the need for theory application in programme evaluation instruments. Theory was not used in the programme evaluation tool, and theory could not be mapped onto the tool retroactively. The data from the present study showed mixed results. Data from Workplaces 1 and 2 indicated that EPIC successfully improved three out of seven employee perceptions of SUP reduction efforts. However, individual workplace data showed that EPIC only improved one out of seven perceptions in Workplace 1 and three out of seven perceptions in Workplace 2. Surprisingly, Workplace 1 observed a decrease in plastic waste after the programme, while Workplace 2 saw an increase. Without the clear integration of theory, it is difficult to pinpoint areas for improvement. It is, however, posited that COVID-19 restrictions on people attending their workplaces and low survey response rates may have contributed to these unexpected results.

The present study highlights key improvements that can be made to evaluations of voluntary behaviour change programmes. Careful evaluation of behaviour change programmes is key to improving programme effectiveness. Practitioners will find the suggested improvements from this study helpful in developing and refining voluntary behaviour change programme evaluations.

This is one of the first studies to evaluate the impacts of a voluntary behaviour change programme aimed at reducing SUPs in the workplace. It also adds to the limited literature on voluntary behaviour change interventions overall and adds to the movement towards better application of theory in behaviour change interventions.

In September 1985, eight sets of children's books from Australia began an odyssey that will take them into all fifty states and Canada by the end of 1988. The books— and the resource, reference and display materials that accompany them—were chosen specifically for their value in introducing non‐Australians to Australia and her children's literature. They also provide an ideal starting point for library collection development.

The purpose of this paper is to explore the theoretical mechanisms that underlie the negative effects of low customer density on shoppers' emotions and behavioural responses in retail settings.

This study uses three different qualitative techniques to explore the research question: semi‐structured interviews, shopping with consumers, and focus groups.

Three major issues contribute to unfavorable consumer responses to low customer density levels in retail stores: exposure to undesired social influence from sales personnel; loss of social cues and evaluation criteria; and lack of social stimulation.

The findings of this research assist store managers to resolve the problems associated with low customer density in retail stores. For example, the results suggest that the negative effects of low customer density can be mitigated by providing appropriate training for sales staff as well as by actively communicating the quality, price level, and image of the store.

Empirical evidence shows that the effects of customer density on shopper outcomes follow an inverted U‐shaped trend. Previous research has focused on explaining the negative consequences of high customer density, while the explanatory mechanisms for the negative effects of low customer density remain largely unclear. This research partially fills this gap in the literature by identifying the psychological processes that account for the negative effects of low customer density.

This study examines the interactions between entrepreneurial orientation, supply chain resilience (SCRES) as well as the financial and commercial dimensions of business performance.

Drawing on a literature review, the authors develop a research model to identify positive relationships between five specific dimensions of entrepreneurial orientation, SCRES and business performance based on the dynamic capabilities view. The hypotheses are then empirically validated by applying partial least squares structural equation modeling (PLS-SEM) on survey data obtained from a questionnaire and 168 global companies.

The results partially support the hypotheses and suggest that entrepreneurial activities complement the resilience of supply chains to sudden disruptions and therefore also foster competitive advantage.

The relationships between entrepreneurial orientation, SCRES and business performance are examined and validated empirically in a single model, bridging the gap between these distinct research streams and shedding further light on supply chain risk management.

This paper integrates research on demand- and supply-side risk management practices to better explain how to achieve competitive advantage in dynamic business conditions. The purpose of this study is to develop a model linking supply chain flexibility, agility, robustness and resilience and to investigate its relationships and impact on business performance.

The authors conduct a review of existing literature to derive their hypotheses and operationalize the respective constructs. The formulated research model is then validated applying partial least squares structural equation modeling on survey data from 89 multi-national companies based in Europe.

The authors find a significant positive relationship between supply chain flexibility and supply chain agility as well as supply chain robustness and supply chain resilience, respectively. Additionally, it is argued that supply chain flexibility, agility and resilience have significant positive impact on individual dimensions of business performance.

The relationships between supply chain flexibility, agility, robustness, resilience and business performance are investigated and empirically validated altogether in a single model for the first time, providing a clear separation of these terms and shedding further light on the management of supply chain risks.

The purpose of this paper is to examine the relationships among the experiential quality (EQ) dimensions, experiential satisfaction (ES), experiential involvement (EI), host city image (HCI), experiential equity (EE), spectator affection (SA) and experiential loyalty (EL) in the sport context.

The data used in this study were based on a sample of 674 spectators from the finals of the men’s and women’s football tournaments held at the Maracanã Stadium in Rio, indicating that the proposed model fitted the data.

Findings show that the six EQ dimensions physical environment quality, outcome quality, access quality (AQ), game quality, trip quality (TQ) and security quality (SQ), EI, EE, HCI and SA positively influence ES. Also, EI moderates the relationship between HCI and EL. Moreover, EL is influenced by EI, HCI, SA and ES.

Results will assist sport management in developing and implementing market-orientated service strategies to increase the EQ dimensions, ES, EI, EE, HCI and SA in order to increase EL.

This study provides data that result in a better understanding of the relationships among the EQ dimensions, ES, EI, HCI, EE, SA and EL in the sporting context.

The main objective of this research is to investigate the factors that influence consumer purchase decisions for halal products before and during the COVID-19 pandemic, based on the Engel-Kollat-Blackwell (EKB) theory.

The research was conducted as a survey. The influencing factors were determined based on the grey relational analysis (GRA) approach.

The findings indicate before the COVID-19 pandemic, consumers mainly purchased halal products based on four key factors: purchasing experience, certification label, Internet searches and past consumption experience. However, during the pandemic, the ranking and factors have changed to six indicators, which are past consumption experience, purchasing experience, certification labels, standardized specifications, Internet searches and halal certification labels.

The study was limited by the sample size and geographical area. Nevertheless, the findings could be further explored by expanding related theories toward understand human decisions based on spiritual beliefs.

The findings of this study have important implications for research, practice and society. Understanding the factors influencing halal purchase decisions before and during the pandemic can help businesses, policymakers and halal certification bodies to better cater to consumers' needs and preferences and ensure the continued growth and development of the halal industry.

This study evaluates halal purchasing decisions between periods of certainty and uncertainty by using the GRA. Changes in halal consumption and purchase decisions in response to COVID-19 pandemic have become an emerging topic of discovery. The study addresses the gap in the literature regarding changes in consumer decision pattern.