Search results

This study aims to provide a salt ready-mix to instant fried noodles manufacturers.

Response surface methodology was used to get optimized salt ready-mix based on carbonate salt, disodium phosphate, tripotassium phospahte, sodium hexametaphosphate and sodium chloride. Peak viscosity of flour and yellowness, cooking loss and hardness of noodles were considered as response factors for finding optimized salt formulation.

The results showed that salts have an important role in governing quality of noodles. Optimum levels of five independent variables of salts, namely, carbonate salt (1:1 mixture of sodium to potassium carbonate), disodium phosphate, sodium hexametaphosphate, tripotassium phosphate and sodium chloride were 0.64%, 0.29%, 0.25%, 0.46% and 0.78% on flour weight basis, respectively.

To the best of the authors’ knowledge, this is the first study to assess the effect of different combinations of different salts on the quality of noodles. These findings will also benefit noodle manufacturers, assisting in production of superior quality noodles.

This study aims to increase knowledge of the ability of nutrition labels to guide consumer choices in real-life environments.

Food consumption and plate waste data were collected from two self-service restaurants (SSR) with different customer groups over six observation days: three control and three intervention (with nutrition labelling) periods. Study Group 1 consisted of vocational school students, mostly late adolescents (N = 1,710), and Group 2 consisted of spa hotel customers, mostly elderly (N = 1,807). In the experimental restaurants, the same food was served to the buffets during the control and intervention periods.

The nutrition label in the lunch buffet guides customers to eat fewer main foods and salads and to select healthier choices. Increased consumption of taste enhancers (salt and ketchup) was observed in the study restaurants after nutritional labelling. Nutrition labelling was associated with a reduction in plate waste among the elderly, whereas the opposite was observed among adolescents.

The results provide public policymakers and marketers with a better understanding of the effects of nutrition labelling on consumer behaviour. Future studies should further evaluate the effects of nutrition labelling on the overall quality of customer diets and the complex environmental, social, and psychological factors affecting food choices and plate waste accumulation in various study groups.

High levels of child obesity alongside rising stunting and the absence of a coherent food policy have deemed UK’s food system to be broken. The National Food Strategy (NFS) was debated intensely in media, with discussions on how and who should fix the food system.

Using a mixed methods approach, the authors conduct framing analysis on traditional media and sentiment analysis of twitter reactions to the NFS to identify frames used to shape food system policy interventions.

The study finds evidence that the media coverage of the NFS often utilised the tropes of “culture wars” shaping the debate of who is responsible to fix the food system – the government, the public or the industry. NFS recommendations were portrayed as issues of free choice to shift the debate away from government action correcting for market failure. In contrast, the industry was showcased as equipped to intervene on its own accord. Dietary recommendations made by the NFS were depicted as hurting the poor, painting a picture of helplessness and loss of control, while their voices were omitted and not represented in traditional media.

British media’s alignment with free market economic thinking has implications for food systems reform, as it deters the government from acting and relies on the invisible hand of the market to fix the system. Media firms should move beyond tropes of culture wars to discuss interventions that reform the structural causes of the UK’s broken food systems.

As traditional media coverage struggles to capture the diversity of public perception; the authors supplement framing analysis with sentiment analysis of Twitter data. To the best of our knowledge, no such media (and social media) analysis of the NFS has been conducted. The paper is also original as it extends our understanding of how media alignment with free market economic thinking has implications for food systems reform, as it deters the government from acting and relies on the invisible hand of the market to fix the system.

This study’s aim is to introduce a high-performance sorbent for the removal of both anionic (Congo red; CR) and cationic (methylene blue; MB) dyes from aqueous solutions.

Sodium silicate is adopted as a substrate for GO and AgNPs with positive charge are used as modifiers. The synthesized nanocomposite is characterized by FTIR, FESEM, EDS, BET and XRD techniques. Then, some of the most effective parameters on the removal of CR and MB dyes such as solution pH, sorbent dose, adsorption equilibrium time, primary dye concentration and salt effect are optimized using the spectrophotometry technique.

The authors successfully achieved notable maximum adsorption capacities (Qmax) of CR and MB, which were 41.15 and 37.04 mg g⁻¹, respectively. The required equilibrium times for maximum efficiency of the developed sorbent were 10 and 15 min for CR and MB dyes, respectively. Adsorption equilibrium data present a good correlation with Langmuir isotherm, with a correlation coefficient of R2 = 0.9924 for CR and R2 = 0.9904 for MB, and kinetic studies prove that the dye adsorption process follows pseudo second-order models (CR R2 = 0.9986 and MB R2 = 0.9967).

The results showed that the proposed mechanism for the function of the developed sorbent in dye adsorption was based on physical and multilayer adsorption for both dyes onto the active sites of non-homogeneous sorbent.

The as-prepared nano-adsorbent has a high ability to remove both cationic and anionic dyes; moreover, to the high efficiency of the adsorbent, it has been tried to make its synthesis steps as simple as possible using inexpensive and available materials.

This paper aims to study the application of high-tolerance and flexible indigenous bacteria and fungi, along with the co-metabolism in recycled paper and cardboard mill (RPCM) wastewater treatment (WWT).

The molecular characterization of isolated indigenous bacteria and fungi was performed by 16S rRNA and 18S rRNA gene sequencing, respectively. Glucose was used as a cometabolic substrate to enhance the bioremediation process.

The highest removal efficiency was achieved for both chemical oxygen demand (COD) and color [78% COD and 45% color removal by Pseudomonas aeruginosa RW-2 (MZ603673), as well as approximately 70% COD and 48% color removal by Geotrichum candidum RW-4 (ON024394)]. The corresponding percentages were higher in comparison with the efficiency obtained from the oxidation ditch unit in the full-scale RPCM WWT plant.

Indigenous P. aeruginosa RW-2 and G. candidum RW-4 demonstrated effective capability in RPCM WWT despite the highly toxic and low biodegradable nature, especially with the assistance of glucose.

This paper aims to evaluate the effects of banana (Musa) peel and guava (Psidium guajava) leaves extract as mordants on jute–cotton union fabrics dyed with onion skin extract as a natural dye.

The dye was extracted from the outer skin of onions by boiling in water and later concentrated. The bio-mordants were prepared by maceration using methanol and ethanol. The fabrics were pre-mordanted, simultaneously mordanted and post-mordanted with various concentrations according to the weight of the fabric. The dyed and mordanted fabrics were later subjected to measurement of color coordinates, color strength and colorfastness to the washing test. Furthermore, the dyed samples were characterized by Fourier transform infrared, and different chemical bonds were analyzed by X-ray photoelectron spectroscopy analysis.

Significant improvement was obtained in colorfastness and color strength values in various instances using banana peel and guava leaves as bio mordants. Post-mordanted with banana peel provided the best results for wash fastness. Better color strength was achieved by fabric post-mordanted with guava leave extracts.

Sustainable dyeing methods of natural dyes using banana peel and guava leaves as bio mordants were explored on jute–cotton union fabrics. Improvement in colorfastness and color strength for various instances was observed. Thus, this paper provides a promising alternative to metallic salt mordants.

Globally, consumer’s inclination towards functional foods had noticed due to their greater health consciousness coupled with enhanced health-care cost. The fact that probiotics could promote a healthier gut microbiome led projection of probiotic foods as functional foods and had emerged as an important dietary strategy for improved human health. It had established that ice cream was a better carrier for probiotics than fermented milked due to greater stability of probiotics in ice cream matrix. Global demand for ice cream boomed and probiotic ice cream could have been one of the most demanded functional foods. The purpose of this paper was to review the technological aspects and factors affecting probiotic viability and to standardize methodology to produce functional probiotic ice cream.

Attempt was made to search the literature (review and researched papers) to identify diverse factors affecting the probiotic viability and major technological challenge faced during formulation of probiotic ice cream. Keywords used for data searched included dairy-based functional foods, ice cream variants, probiotic ice cream, factors affecting probiotic viability and health benefits of probiotic ice cream.

Retention of probiotic viability at a level of >10⁶ cfu/ml is a prerequisite for functional probiotic ice creams. Functional probiotic ice cream could have been produced with the modification of basic mix and modulating technological parameters during processing and freezing. Functionality can be further enhanced with the inclusion of certain nutraceutical components such as prebiotics, antioxidant, phenolic compounds and dietary fibres. Based upon reviewed literature, suggested method for the manufacture of functional probiotic ice cream involved freezing of a probiotic ice cream mix obtained by blending 10% probiotic fermented milk with 90% non-fermented plain ice cream mix for higher probiotic viability. Probiotic ice cream with functional features, comparable with traditional ice cream in terms of technological and sensory properties could be produced and can crop up as a novel functional food.

Probiotic ice cream with functional features may attract food manufacturers to cater health-conscious consumers.

This study examined the characteristics, motivations and satisfaction of volunteers for the Cincinnati Flying Pig Marathon Weekend across a 10-year period. The purpose was to enhance our understanding of sport event volunteers, especially in the long term. This information and insight may be useful in light of ongoing challenges with volunteer recruitment and retention, which have been exacerbated by the COVID-19 pandemic.

The authors developed and implemented an online survey, based primarily on the Special Event Volunteer Motivation Scale (SEVMS) and the Volunteer Motivations Scale for International Sporting Events (VMS-ISE). The sample included a total of 2,038 respondents – 1,086 in 2012 and 952 in 2022. Quantitative data were analyzed using descriptive statistics and Chi-square tests; qualitative data provided additional insight.

About two-thirds of 2022 survey respondents were “repeat volunteers.” Volunteer characteristics, motivations and satisfaction remained relatively consistent across the 10-year period. These volunteers were motivated by a set of multiple, interrelated factors which the authors call “community-based altruism” – that is, the desire to help others driven by a sense of community involvement and pride. In both years, more than 90% were satisfied with their volunteer experience. Satisfaction was higher for individuals with certain characteristics such as being a repeat volunteer and volunteering with a group.

This may be the first scholarly article to assess volunteer characteristics, motivations and satisfaction for a major sport event in the same location across multiple years. While it focused on a three-day running event in a midwestern city in the United States, the approach and findings may be applicable to sport event volunteers in other contexts.