Search results

The purpose of this study is to analyze the technological change under development linked to the convergence of the Internet of Things (IoT) and digital transformation (DT) from the perspective of a scientific mapping in a context marked by the occurrence of an unexpected event that accelerated this process such as the SARS-CoV-2 pandemic and its variants.

The study was developed under the longitudinal scientific mapping approach and considered the period 1990–2021 using as a basis the descriptors DT and IoT. The steps followed were identification and selection of keywords; design and application of an algorithm to identify these selected keywords in titles, abstracts and keywords using terms in Web of Science (WoS) to contrast them; and performing a data processing based on the journals in the Journal Citation Report during 2022. The longitudinal study uses scientific mapping to analyze the evolution of the scientific literature that seeks to understand the acceleration in the integration of technology and its impact on the human factor, processes and organizational culture.

This study showed that the technologies converging around IoT form the basis of the main DT processes being experienced on a global scale; furthermore, it was shown that the pandemic accelerated the convergence and application of new technologies to support the major changes required for a world with new needs. Finally, China and the USA differ significantly in the production of scientific knowledge with respect to the first eight followers.

The knowledge gap addressed by this study is to identify the production of scientific knowledge related to IoT and its impact on DT processes at the scale of individuals, organizations and the new way of delivering value to society. This knowledge about researchers, institutions, countries and the derivation is multiple indicators allows improving decision-making at multiple scales on these issues.

This paper aims to apply the novel numerical model to analyze the effect of pillar material on the response of compound quartz crystal resonator (QCR) with an array of pillars. The performance of the proposed device compared to conventional QCR method was also investigated.

A finite element method model was developed to analyze the behavior of QCR coupled with an array of pillars. The model was composed of an elastic pillar, a solution and a perfectly matched layer. The validation of the model was performed through a comparison between its predictions and previous experimental measurements. Notably, a good agreement was observed between the predicted results and the experimental data.

The effect of pillar Young’s modulus on the coupled QCR and pillars with a diameter of 20 µm, a center-to-center spacing of 40 µm and a density of 2,500 kg/m³ was investigated. The results indicate that multiple vibration modes can be obtained based on Young’s modulus. Notably, in the case of the QCR–pillar in air, the second vibration mode occurred at a critical Young’s modulus of 0.2 MPa, whereas the first mode was observed at 3.75 Mpa. The vibration phase analysis revealed phase-veering behavior at the critical Young’s modulus, which resulted in a sudden jump-and-drop frequency shift. In addition, the results show that the critical Young’s modulus is dependent on the surrounding environment of the pillar. For instance, the critical Young’s modulus for the first mode of the pillar is approximately 3.75 Mpa in air, whereas it increases to 6.5 Mpa in water.

It was concluded that the performance of coupled QCR–pillar devices significantly depends on the pillar material. Therefore, choosing pillar material at critical Young’s modulus can lead to the maximum frequency shift of coupled QCR–pillar devices. The model developed in this work helps the researchers design pillars to achieve maximum frequency shift in their measurements using coupled QCR–pillar.

The purpose of this study is to examine diverse risks and barriers that influence customers' attitude leading to their actual use of wearable devices in India. This study used technological literacy as a moderating variable to understand the relationship between barriers and attitudes toward adoption of wearable device.

A survey questionnaire was developed through focused group discussions with field experts. Data were collected through online as well as offline modes. A Google form was created and its weblink was shared with the respondents using wearable devices. Both online as well as offline modes were used for data collection. Several reminders through telephone and revisits were undertaken to approach the respondents.

The results of this study indicated that psychological risk and financial risk emerged strongest barriers of wearable technologies. This was followed by infrastructure barriers and performance risk. The strength of the relationship between technological anxiety and attitudes was lower but still significant. Surprisingly, privacy risk and social risk were not statistically significant. This study also validated the impact of technological literacy as a moderator between risks and attitudes.

This study contributes to the research by validating numerous risks and barriers in the adoption of wearable devices. This study not only offers a novel perspective on researching diverse barriers but also elucidates the moderating role of technological literacy which has not been covered in extant literature.

The purpose of this study, most recent advancements in threedimensional (3D) printing have focused on the fabrication of components. It is typical to use different print settings, such as raster angle, infill and orientation to improve the 3D component qualities while fabricating the sample using a 3D printer. However, the influence of these factors on the characteristics of the 3D parts has not been well explored. Owing to the effect of the different print parameters in fused deposition modeling (FDM) technology, it is necessary to evaluate the strength of the parts manufactured using 3D printing technology.

In this study, the effect of three print parameters − raster angle, build orientation and infill − on the tensile characteristics of 3D-printed components made of three distinct materials − acrylonitrile styrene acrylate (ASA), polycarbonate ABS (PC-ABS) and ULTEM-9085 − was investigated. A variety of test items were created using a commercially accessible 3D printer in various configurations, including raster angle (0°, 45°), (0°, 90°), (45°, −45°), (45°, 90°), infill density (solid, sparse, sparse double dense) and orientation (flat, on-edge).

The outcome shows that variations in tensile strength and force are brought on by the effects of various printing conditions. In all possible combinations of the print settings, ULTEM 9085 material has a higher tensile strength than ASA and PC-ABS materials. ULTEM 9085 material’s on-edge orientation, sparse infill, and raster angle of (0°, −45°) resulted in the greatest overall tensile strength of 73.72 MPa. The highest load-bearing strength of ULTEM material was attained with the same procedure, measuring at 2,932 N. The tensile strength of the materials is higher in the on-edge orientation than in the flat orientation. The tensile strength of all three materials is highest for solid infill with a flat orientation and a raster angle of (45°, −45°). All three materials show higher tensile strength with a raster angle of (45°, −45°) compared to other angles. The sparse double-dense material promotes stronger tensile properties than sparse infill. Thus, the strength of additive components is influenced by the combination of selected print parameters. As a result, these factors interact with one another to produce a high-quality product.

The outcomes of this study can serve as a reference point for researchers, manufacturers and users of 3D-printed polymer material (PC-ABS, ASA, ULTEM 9085) components seeking to optimize FDM printing parameters for tensile strength and/or identify materials suitable for intended tensile characteristics.