Search results

Pipelined analog-to-digital converters (ADCs) are widely used in electronic circuits. The purpose of this paper is to propose a new digital background calibration method to correct the capacitor mismatch, finite direct current (DC) gain and nonlinearity of residue amplifiers in pipelined ADCs.

The errors are corrected by defining new functions based on generalized Newton–Raphson algorithm. Although the functions have analytical solutions, an iterative procedure is used for calibration. To accelerate the calibration process, proper initialization for the errors is identified by using evaluation estimation block and solving inverse matrix.

Several behavioral simulations of a 12-bit 100MS/s pipelined ADC in MATLAB indicate that signal-to-(noise + distortion) ratio (SNDR) and spurious free dynamic range (SFDR) are improved from 30dB/33dB to 70dB/79dB after calibration. Calibration is achieved in approximately 2,000 clock cycles.

The digital part of the proposed method is implemented on field-programmable gate array to validate the performance of the pipelined ADC. The experimental result shows that the degradation of SNDR, SFDR, integral nonlinearity, differential nonlinearity and effective number of bits is negligible according to fixed-point operation vs floating-point in simulation results.

The novelty of this study is to use Newton–Raphson algorithm combined with appropriate initialization to reduce the number of divisions as well as calibration time, which is suitable in the recent nano-meter complementary metal oxide semiconductor technologies.

A third-order discrete time sigma delta modulator (SDM) is proposed with optimum performance by addressing instability and power dissipations issues, and a novel SDM architecture is designed and verified in behavioural modelling in MATLAB/SIMULINK environment. Simulation results show that performance parameters of proposed modulator achieved SNR of 105.41 dB, SNDR of 101.96 dB and DR of 17 bits for the signal bandwidth of 20 kHz.

This paper describes single-loop SDM design with optimum selection of integrator weights for physiological signal processing in IoT applications.

The proposed discrete time modulator designed with 1-bit quantizer and optimum oversampling ratio proved as power efficient. Integrator scaling coefficients are generated in LabVIEW environment for pure third-order noise shaping.

This paper contains the novelty in the work, and it is suitable for cognitive Internet of Things applications.

The purpose of this paper is to present the design and optimization of a comparator with two transistors.

The effect of back‐gate bias in MOSFET is analyzed and applied to a comparator circuit in a flash‐type A/D converter (ADC). The 4‐bit flash ADC is simply structured by change of comparator block based on CMOS latch with pMOSFET switch. The back‐gate bias on MOSFET changes the threshold voltage and provides for a CMOS inverter to shift the voltage transfer characteristics. In the new type comparator, the variation of turn‐on voltage is controlled within 0.1 V in 4‐bit ADC. The fabrication is done in a 0.35 μm single‐poly four‐metal process.

Layout simulation shows that INL is within 0.3 LSB and SNDR is 25.4 dB at input frequency of 20 KHz and sampling rate of 4 MS/s. The 0.26 × 0.43 mm 2 ADC dissipates 1.2 mW at supply voltage of 3.3 V.

A comparator which uses the effect of the back‐gate bias on MOSFET is applied to a flash ADC. The paper is of value in showing how the circuit of this comparator is quite simple compared with a conventional comparator based on a CMOS latch, which is adaptable for a low‐power analog circuit in future. The experimental output of the 4‐bit flash ADC shows a good agreement with a simulation. Power consumption 1.2 mW, INL 0.2 LSB, and SNDR 25 dB are obtained in the simulation study.

This paper attempted a novel approach for system-level modeling and simulation of sigma-delta modulator for low-frequency CMOS integrated analog to digital interfaces. Comparative analysis of various architectures topologies, circuit implementation techniques are described with analytical procedure for effective selection of topologies for targeted specifications.

Virtual instruments are presented in labview environment to analyze the correlation of circuit-level non-ideal effects with key design parameters over sampling ratio, coarse quantizer bits and loop filter order. A fourth-order single-loop sigma-delta modulator is designed and verified in MATLAB simulink environment with careful selection of integrator weights to meet stable desired performance.

The proposed designed achieved SNDR of 122 dB and 20 bit resolution satisfying high-resolution requirements of low-frequency biomedical signal processing applications. Even though the simulation performed at behavioral level, the results obtained are considered as accurate, by including all non-ideal and non-linear circuit errors in simulation process.

Virtual instruments using labview environment used to analyze the correlation of circuit-level non-ideal effects with key design parameters over sampling ratio, coarse quantizer bits and loop filter order for accurate design.

Successive approximation register (SAR) analogue to digital converter (ADC) is well-known with regard to low-power operations. To make it energy-efficient and time-efficient, scientists are working for the last two decades, and it still needs the attention of the researchers. In actual work, there is no mechanism and circuitry for the production of two simultaneous comparator outputs in SAR ADC.

A small-sized, low-power and energy-efficient circuitry of a dual comparator and an amplifier is presented, which is the most important part of SAR ADC. The main idea is to design a multi-dimensional circuit which can deliver two quick parallel comparisons. The circuitry of the three devices is combined and miniaturized by introducing a lower number of MOSFET’s and small-sized capacitors in such a way that there is no need for any matching and calibration.

The supply voltage of the proposed comparator is 0.7 V with the overall power consumption of 0.257mW. The input and clock frequencies are 5 and 50 MHz, respectively. There is no requirement for any offset calibration and mismatching concerns due to sharing and centralization of spider-latch circuitry. The total offset voltages are 0.13 0.31 mV with 0.3VDD to VDD. All the components are small-sized and miniaturized to make the circuit cost-effective and energy-efficient. The rise and response time of comparator is around 100 ns. SNDR improved from 56 to 65 dB where the input-referred noise of an amplifier is 98mVrms.

The proposed design has no linear-complexity compared with the conventional comparator in both modes (working and standby); it is ultimately intended and designed for 11-bit SAR ADC. The circuit based on three rapid clock pulses for three different modes includes amplification and two parallel comparisons controlled and switched by a latch named as “spider-latch”.

In parallel sampling method, the size of the sampling capacitor is reduced to improve the bandwidth of the ADC.

Various low-power techniques for 10-bit 200MS/s pipelined analog-to-digital converter (ADC) are presented. This work comprises two techniques including parallel sampling and switched op-amp sharing technique.

This paper aims to study the effect of parallel sampling and switched op-amp sharing techniques on power consumption in pipelined ADC. In switched op-amp sharing technique, the numbers of op-amps used in the stages are reduced. Because of the reduction in the size of capacitors in parallel sampling technique and op-amps in the switched op-amp sharing technique, the power consumption of the proposed pipelined ADC is reduced to a greater extent.

Simulated the 10-bit 200MS/s pipelined ADC with complementary metal oxide semiconductor process and the simulation results shows a maximum differential non-linearity of +0.31/−0.31 LSB and the maximum integral non-linearity (of +0.74/−0.74 LSB with 62.9 dB SFDR, 55.90 dB SNDR and ENOB of 8.99 bits, respectively, for 18mW power consumption with the supply voltage of 1.8 V.

There are many types of the ADCs implemented in the mobile and wireless devices. Most of these devices are battery operated and operational at low input voltage. SAR ADC is popular for its low power operations and simple architecture. Scientists are still working to make its working faster under the same low power area. There are many SAR-ADC implemented in the past two decades, but still, there is a big room for dual SAR-ADC.

The authors are presenting a dual SAR-ADC with a smaller number of components and blocks. The proposed ultra-low-power circuit of the SAR-ADC consists of four major blocks, which include Bee-bootstrap, Spider-Latch dual comparator, dual SAR-logic and dual digital to analog converter. The authors have used the 90-nm CMOS library for the construction of the design.

The power breaks down of the comparator are dramatically improved from 0.006 to 0.003 uW. The ultimate design has 5 MHz operating frequency with 25 KS/s sampling frequency. The supply voltage is 1.2 V with 35.724 uW power consumption. Signal-to-noise and distortion ratio and spurious-free dynamic range are 65 and 84 dB, respectively. The Walden's figure of merits calculated 7.08 fj/step.

The authors are proposing two-in-one circuit for SAR-ADC named as “dual SAR-ADC”, which obeys the basic equation of duality, derived and proved under the heading of proposed solution. It shows a clear difference between the performance of two circuit-based ADC and one dual circuit ADC. The number of components is reduced by sharing the work load of some key components.

As technology advances the demand for an analog-to digital converter has increased, as every application demands a converter as per its parameters. Currently, work is done on improvement of data converters at three levels of design – architectural, circuit and physical level. This paper aims to review the work done in the field of analog-to-digital converters (ADCs) at architectural and circuit level and discusses the achievements in this field. Furthermore, a new architecture is proposed, which works at higher resolution and provides optimum design parameters at low power consumption.

A hybrid architecture combining the features of synthetic approximation register and sigma-delta ADC is presented. The validity of the proposed design at architectural level is verified using MATLAB SIMULINK simulations.

The design simulation was tested for a sinusoidal wave of 1 V at the test frequency of 60 Hz. The design consumes least power, and is found to yield an error of the order less than 10–3 V, thus providing highly accurate digital output.

The design is applicable in many applications including biomedical systems, Internet-of-Things and earthquake engineering. This architecture can be further optimized to obtain better performance parameters.

The purpose of this paper is to present an up-to-date survey on the non-orthogonal multiple access (NOMA) technique with co-operative strategy, a fast-evolving fifth-generation (5 G) technology. NOMA is used for serving many mobile users, both in power and code domains. This paper considers the power-domain NOMA, which is now discussed as NOMA.

The first part of the paper discusses NOMA-based cooperative relay systems using different relay strategies over different channel models. In various research works, the analytical expressions of many performance metrics were derived, measured and simulated for better performance of the NOMA systems. In the second part, a brief introduction to diversity techniques is discussed. The multiple input and multiple output system merged with cooperative NOMA technology, and its future challenges were also presented in this part. In the third part, the paper surveys some new conceptions such as cognitive radio, index modulation multiple access, space-shift keying and reconfigurable intelligent surface that can be combined with NOMA systems for better performance.

The paper presents a brief survey of diverse research projects being carried out in the field of NOMA. The paper also surveyed two different relaying strategies that were implemented in cooperative NOMA over different channels and compared several performance parameters that were evaluated and derived in these implementations.

The paper provides a scope for recognizable future work and presents a brief idea of the new techniques that can be united with NOMA for better performance in wireless systems.

Successive Approximation Register-Analog to Digital Converter (SAR-ADC) has been achieved notable technological advancement since the past couple of decades. However, it’s not accurate in terms of size, energy, and time consumption. Many projects proposed to make it energy efficient and time-efficient. Such designs are unable to deliver two parallel outputs.

To this end, this study introduced an ultra-low-power circuitry for the two blocks (bootstrap and comparator) of 11-bit SAR-ADC. The bootstrap has three sub-parts: back-bone, left-wing and right-wing, named as bat-bootstrap. The comparator block has a circuitry of the two comparators and an amplifier, named as comp-lifier. In a bat-bootstrap, the authors plant two capacitors in the back-bone block to avoid the patristic capacitance. The switching system of the proposed design highly synchronized with the short pulses of the clocks for high accuracy. This study simulates the proposed circuits using a built-in Cadence 90 nm Complementary Metal Oxide Semiconductor library.

The results suggested that the response time of two bat-bootstrap wings and comp-lifier are 80 ns, 120 ns, and 90 ns, respectively. The supply voltage is 0.7 V, wherever the power consumption of bat-bootstrap, comp-lifier and SAR-ADC are 0.3561µW, 0.257µW and 35.76µW, respectively. Signal to Noise and Distortion Ratio is 65 dB with 5 MHz frequency and 25 KS/s sampling rate. The input referred noise of the amplifier and two comparators are 98µVrms, 224µVrms and 224µVrms, respectively.

Two basic circuit blocks for SAR-ADC are introduced, which fulfill the duality approach and delivered two outputs with highly synchronized clock pulses. The circuit sharing concept introduced for the high performance SAR-ADCs.