Search results

Selective laser melting (SLM) is an important advanced additive manufacturing technology. The existing SLM printing technology cannot manufacture the mechanical parts that fully meet the requirements of high precision and strength. This paper aims to explore a new post-processing method for SLM 316L specimen, namely, using of the TiN/TiAlN multilayer coating fabricated by multi-arc ion plating on the surface of SLM specimens, for improving the performance of SLM specimens. The other purpose of this paper is compared the performances of the TiAlN/TiN multilayer coating machined specimen and the TiN/TiAlN multilayer coating SLM specimen.

The TiN/TiAlN multilayer coating is fabricated by multi-arc ion plating on the surface of 316L specimens. The surface morphology and selected mechanical properties of TiN/TiAlN multilayer coating plating on the SLM substrate specimen and the machined substrate specimen were studied in this paper. The analyzed properties included surface topography, micro hardness, the adhesion, the thickness and the wear resistance of TiN/TiAlN multilayer coating plating on the SLM substrate specimen and the machined substrate specimen.

The electron microscope images reveal that surface morphology of TiN/TiAlN multilayer coating plating on the SLM specimens is relatively flat, and there are some micro-particles in different sizes and pin holes dispersed on them. After TiN/TiAlN multilayer coating, the performances of SLM samples, such as micro hardness, the thickness and the wear resistance, were significantly improved. The micro hardness of TiN/TiAlN multilayer coating machined specimen is higher than that of TiN/TiAlN multilayer coating SLM specimen. However, the adhesion of TiN/TiAlN multilayer coating machined specimen is less than that of TiN/TiAlN multilayer coating SLM specimen.

The study provides a new post-processing method for SLM 316L specimen to improve the performance of SLM specimens and to enable SLM specimens to be applied in the field of precision mechanical transmission.

This paper aims to better control the mechanical properties and functional properties of NiTi alloy.

NiTi alloy samples with equal atomic ratio were formed by selective laser melting (SLM). X-ray diffraction (XRD), differential scanning calorimetry (DSC), scanning electron microscopy and tensile testing methods were used to study the effects of different laser power and scanning speed on the densification behavior, phase transformation characteristics and mechanical properties of NiTi alloy.

Compared with the laser power, the variation of the keyhole effect caused by the change of scanning speed is more intense, which has a greater effect on the densification behavior of SLM NiTi alloy. The effect of the laser power on the phase transition temperature is small. The increase of scanning speed weakens the burning degree of Ni element, so phase transition temperature decreases. The results of DSC test and tensile test show that the scanning velocity can significantly change the phase transition temperature, martensite twins reorientation and stress–strain behavior of SLM NiTi alloy.

This study provides a potential method to regulate the mechanical properties and functional properties of NiTi shape memory alloy in the future and NiTi alloys formed by SLM with good elongation were obtained because the Supercellular crystal structure formed during the nonequilibrium solidification of SLM and the superfine precipitates dispersed in the alloy prevented the dislocation formation.

The present study aims to investigate the effect of finish machining and aging processes on the surface integrity of the selective laser melted (SLM) maraging steel samples and compared them with those obtained conventionally.

Finish machining and aging were applied on the SLM and wrought maraging samples to investigate and compare their microstructural and mechanical properties such as surface roughness, microhardness and wear resistance.

After applying aging and finish machining treatments, the surface roughness <1 µm, microhardness (542Hv) and wear resistance (COF 0.578) of SLM samples were similar to their wrought counterparts. Compared to finish machining, the effect of aging was more significant on the microhardness and the wear resistance, regardless of sample type.

The knowledge of post-processing is essential to enhance the functional performance of the SLM samples. Aging and finish machining were applied for the first time to evaluate the surface integrity of the SLM prepared maraging steel and compared it with the wrought samples.

In recent years, the use of high performing materials, and application of additive manufacturing technology for industrial production has witnessed a steady rise and its expanse is only to increase in the future. “Selective laser melting (SLM) technique” for an exotic nickel-titanium (NiTi) shape memory alloy (SMA) is expected to a great facilitator to research in this area. The purpose of this paper is to put forth the research direction of NiTi shape memory alloy by selective laser melting.

This review also summaries and skims out the information on process equipment, adopted methodologies/strategies, effects of process parameters on important responses e.g. microstructure and comprehensive functional and mechanical properties of SLM-NiTi. In particular, the functional characteristics (i.e. shape memory effects and super-elasticity behavior), process analysis and application status are discussed.

Current progresses and challenges in fabricating NiTi-SMA of SLM technology are presented.

This review is a useful tool for professional and researchers with an interest in the field of SLM of NiTi-SMA.

This review provides a comprehensive review of the publications related to the SLM techniques of NiTi-SMA while highlighting current challenges and methods of solving them.

Selective laser melting (SLM) is an additive manufacturing technology that is gaining industrial and research interest as it can directly fabricate near full density metallic components. The paper aims to identify suitable process parameters for SLM of processing of pure nickel powder and to study the microstructure of such products. The study also aims to characterize the microhardness and tensile properties of pure nickel produced by SLM.

A 2⁴ factorial design experiment was carried out to identify the most significant factors on the resultant porosity of nickel parts. A subsequent experiment was carried out with a laser power of 350 W. The scanning speeds and hatch spacings were varied.

Scanning speed and hatch spacing have significant effects on the porosity of SLM components. A high relative density of 98.9 per cent was achieved, and microhardness of 140 to 160 Hv was obtained from these samples. A tensile strength 452 MPa was obtained.

As the energy input levels were made in steps of 20 J/mm³ for the optimization study, the true optimal combination of parameters may have been missed. Therefore, researchers are encouraged to test the parameters with smaller variations in energy levels.

The paper provides a set of optimized parameters for the SLM of pure nickel. This study enables the three-dimensional (3D) printing of objects with nickel, which has applications in chemical catalyses and in microelectromechanical systems with its magnetostrictive properties.

This research is the first in direct processing of pure nickel using SLM, with the identification of suitable process parameters. The study also provides an understanding of the porosity, microhardness, strength and microstructure of SLM produced nickel parts. This work paves the way for standardization of 3D printed nickel components and enables the applications of pure nickel via SLM.

This paper aims to summarize design rules based on the process characteristics of selective laser melting (SLM) and structural optimization and apply the design rules in the lightweight design of an aluminum alloy antenna bracket. The design goal is to reduce 30 per cent of the weight while maintaining the stress levels in the original part.

To reduce weight as much as possible, the titanium alloy with higher specific strength was selected during the process of optimization. The material distribution of the bracket was improved by the topology optimization design. The redesign for SLM was used to obtain an optimization model, which was more suitable for SLM. The component performance was improved by shape optimization. The modal analysis data of the structural optimization model were compared with those of the stochastic lightweight model to verify the structural optimization model. The scanning data were compared with those of the original model to verify whether the model was suitable for SLM.

Structural optimization design for antenna bracket realized the mass decrease of 30.43 per cent and the fundamental frequency increase of 50.18 per cent. The modal analysis data of the stochastic lightweight model and the structural optimization model indicated that the optimization performance of structural optimization method was better than that of the stochastic lightweight method. The comparison results between the scanning data of the forming part and the original data confirmed that the structural optimization design for SLM lightweight component could achieve the desired forming accuracy.

This paper summarizes geometric constraints in SLM and derives design rules of structural optimization based on the process characteristics of SLM. SLM design rules make structural optimization design more reasonable. The combination of structural optimization design and SLM can improve the performance of lightweight antenna bracket significantly.

This paper aims to verify that additive manufacturing technology could be used for the redesign and rapid manufacturing of tools and determine whether the mechanical performance of such tools can satisfy the practical operating requirements.

A special key was selected as the research object in this paper. The special key was innovatively redesigned and manufactured directly using selective laser melting (SLM). The function and critical geometries of the special key were first analysed, which was followed by discussions on the geometrical constraints in the manufacturing of typical geometrical features using SLM technology. Next, the special key was redesigned based on the SLM geometrical constraints and the functional requirements. Finally, the key was manufactured using SLM, and the mechanical performance characteristics of the key were determined.

The minimal geometrical feature was 0.2 mm when manufacturing thin walls using SLM. The reliable building angle of an overhanging surface was 40°. The top surface quality of the part could be greatly improved through laser surface re-melting. The volume of the redesigned special key based on the SLM process was only one-third to one-fourth of the original key. The mechanical properties, such as tensile strength and micro-hardness, of the samples manufactured using SLM were able to reach the practical operating requirements.

It is completely feasible to redesign and manufacture precision tools based on the innovative approach of SLM. The advantages of the redesigned tools includes the lack of design restrictions that hinder traditional manufacturing methods, material savings, ability to produce tools that cannot be easily copied and rapid production speed for a small number of tools.

The purpose of this paper is to examine the effect of internal pores on the tensile properties of a Co–Cr–Mo alloy fabricated by selective laser melting (SLM).

The size and volume fraction of pores were controlled through high temperature annealing (HTA) and hot isostatic pressing (HIP).

After HTA, the size and fraction of pores decreased compared with the as-built SLM sample, and no pores were observed after HIP. Tensile tests of the HTA and HIP samples showed nearly similar tensile deformation behavior. From the results, the authors found that the size of the internal pores formed in the SLM process had little effect on the tensile properties. The as-built SLM sample had less elongation than the HTA and HIP samples, which would not the effect of porosity, but rather the effect of the residual stress and the retained ε phase after the SLM process.

Although pores are a main factor that influence the mechanical properties, the effect of pores on the tensile properties of Co–Cr–Mo alloys fabricated by SLM has not been studied. Therefore, in this study, the effect of pores on the tensile properties of a Co–Cr–Mo alloy fabricated by SLM was studied.

Selective laser melting (SLM) is a powder metallurgical (PM) additive manufacturing process whereby a three‐dimensional part is built in a layer‐wise manner. During the process, a high intensity laser beam selectively scans a powder bed according to the computer‐aided design data of the part to be produced and the powder metal particles are completely molten. The process is capable of producing near full density (∼98‐99 per cent relative density) and functional metallic parts with a high geometrical freedom. However, insufficient surface quality of produced parts is one of the important limitations of the process. The purpose of this study is to apply laser re‐melting using a continuous wave laser during SLM production of 316L stainless steel and Ti6Al4V parts to overcome this limitation.

After each layer is fully molten, the same slice data are used to re‐expose the layer for laser re‐melting. In this manner, laser re‐melting does not only improve the surface quality on the top surfaces, but also has the potential to change the microstructure and to improve the obtained density. The influence of laser re‐melting on the surface quality, density and microstructure is studied varying the operating parameters for re‐melting such as scan speed, laser power and scan spacing.

It is concluded that laser re‐melting is a promising method to enhance the density and surface quality of SLM parts at a cost of longer production times. Laser re‐melting improves the density to almost 100 per cent whereas 90 per cent enhancement is achieved in the surface quality of SLM parts after laser re‐melting. The microhardness is improved in the laser re‐molten zone if sufficiently high‐energy densities are provided, probably due to a fine‐cell size encountered in the microstructure.

There has been extensive research in the field of laser surface modification techniques, e.g. laser polishing, laser hardening and laser surface melting, applied to bulk materials produced by conventional manufacturing processes. However, those studies only relate to laser enhancement of surface or sub‐surface properties of parts produced using bulk material. They do not aim at enhancement of core material properties, nor surface enhancement of (rough) surfaces produced in a PM way by SLM. This study is carried out to cover the gap and analyze the advantages of laser re‐melting in the field of additive manufacturing.

This paper aims to identify issues with joining selective laser melting (SLM) steels with conventional cold rolled steels through remote laser beam welding.

A novel approach for substituting conventional cold rolled metal sheets with SLM metal sheets, made of 316L and 18-Ni 300, is presented. The characteristics of the interaction of wrought and SLM materials are described, and joining benchmark parameters are presented and compared to known existing joining results. Finally, the joints are assessed in line with automotive specifications. This research also addresses the importance of joining technologies for the implementation of SLM as a full-fledged manufacturing technology for the automotive industry.

New parameter ranges for laser beam welding of SLM steels are defined.

This research is limited to the examined steels and the used machines, parameters and equipment.

The presented benchmark parameters are expected to be useful for designers, product developers and machine operators.

Little knowledge is available about the behavior of SLM materials and their suitability for assembly processes. Novel information about SLM steels and their interaction with conventionally produced steel sheets is presented.