Search results

This paper aims to propose a new microfluidic portable experimental platform for quick detection of heavy metal ions (HMIs) in picomolar range. The experimental setup uses a microfabricated piezoresistive sensor (MPS) array of eight cantilevers with ion-selective self-assembled monolayer's (SAM).

Most of the components used in this experimental setup are battery operated and, hence, portable to perform the on-field experiments. HMIs (antigen) and thiol-based SAM (antibody) interaction start bending the microcantilever. This results in a change of resistance, which is directly proportional to the surface stress produced due to the mass of targeted HMIs. The authors have used Cysteamine and 4-Mercaptobenzoic acid as a thiol for creating SAM to test the sensitivity and identify the suitable thiol. Some of the cantilevers are blocked using acetyl chloride to use as a reference for error detection.

The portable experimental platform achieves very small detection time of 10-25 min with a lower limit of detection (LOD) 0.762 ng (6.05 pM) for SAM of Cysteamine and 4-Mercaptobenzoic acid to detect Mn2+ ions. This technique has excellent potential and capability to selectively detect Hg2+ ions as low as 2.43 pM/mL using SAM of Homocysteine (Hcys)-Pyridinedicarboxylic acid (PDCA).

As microcantilever is very thin and fragile, it is challenging to apply a surface coating to have selective detection using Nanadispenser. Some of the cantilevers get broken during this process.

The excessive use and commercialization of NPs are quickly expanding their toxic impact on health and the environment. Also, LOD is limited to nanomolar range. The proposed method used the combination of thin-film, NPs, and MEMS-based technology to overcome the limitation of NPs-based technique and have picomolar range of HMIs detection.

The purpose of this paper is a new thin-film based sensor proposed for sensitive and selective detection of mercury (Hg²⁺) ions in water. The thin-film platform is easy to use and quick for heavy metal ions (HMIs) detection in the picomolar range. Ion-selective self-assembled monolayer's (SAM) of thiol used for the detection of HMIs above the Au/Ti top surface.

A thin-film based platform is suitable for the on-field experiments and testing of water samples. HMIs (antigen) and thiol-based SAM (antibody) interaction results change in surface morphology and topography. In this study, the authors have used different characterization techniques to check the selectivity of the proposed method. This change in the morphology and topography of thin-film sensor checked with Fourier-transform infrared spectroscopy, surface-enhanced Raman scattering spectroscopy, atomic force microscopy and scanning electron microscopy with energy dispersive x-ray analysis used for high-resolution images.

This thin-film based platform is straightforward to use and suitable for real-time detection of HMIs at the picomolar range. This thin-film based sensor platform capable of achieving a lower limit of detection (LOD) 27.42 ng/mL (136.56 pM) using SAM of Homocysteine-Pyridinedicarboxylic acid to detect Hg²⁺ ions.

A thin-film based technology is perfect for real-time testing and removal of HMIs, but the LOD is higher as compared to microcantilever-based devices.

The excessive use and commercialization of nanoparticle (NPs) are quickly expanding their toxic impact on health and the environment. The proposed method used the combination of thin-film and NPs, to overcome the limitation of NPs-based technique and have picomolar (136.56 pM) range of HMIs detection. The proposed thin-film-based sensor shows excellent repeatability and the method is highly reliable for toxic Hg²⁺ ions detection. The main advantage of the proposed thin-film sensor is its ability to selectively remove the Hg²⁺ ions from water samples just like a filter and a sensor for detection at picomolar range makes this method best among the other current-state of the art techniques.

This paper aims to report an insightful portable microfluidic system for rapid and selective sensing of Hg²⁺ in the picomolar (pM) concentration using microcantilever-based piezoresistive sensor. The detection time for various laboratory-based techniques is generally 12–24 h. The majority of modules used in the proposed platform are battery oriented; therefore, they are portable and handy to carry-out on-field investigations.

In this study, the authors have incorporated the benefit of three technologies, i.e. thin-film, nanoparticles (NPs) and micro-electro-mechanical systems, to selectively capture the Hg²⁺ at the pM concentration. The morphology and topography of the proposed sensor are characterized using field emission scanning electron microscopy and verification of the experimental results using energy dispersive X-ray.

The proposed portable microfluidic system is able to perform the detection in 5 min with a limit of detection (LOD) of 0.163 ng (0.81 pM/mL) for Hg²⁺, which perfectly describes its excellent performance over other reported techniques.

A microcantilever-based technology is perfect for on-site detection, and a LOD of 0.163 ng (0.81 pM/mL) is outstanding compared to other techniques, but the fabrication of microcantilever sensor is complex.

Many researchers used NPs for heavy metal ions sensing, but the excess usage and industrialization of NPs are rapidly expanding harmful consequences on the human life and nature. Also, the LOD of the NPs-based method is limited to nanomolar concentration. The suggested microfluidic system used the benefit of thin-film and microcantilever devices to provide advancement over the NPs-based approach and it has a selective sensing in pM concentration.

This paper aims to provide a technical insight into a selection of recent developments of sensor based on metamaterials.

Following a short introduction, this first part discusses sensors based on acoustic metamaterials. It then briefly considers negative index materials and split ring resonators and provides examples of sensors based on metamaterials which interact with electromagnetic radiation in the microwave, terahertz and infra-red regions. Finally, brief concluding comments are drawn.

Since their discovery at around the turn of the century, metamaterials have been studied widely by the research community. A diverse range of sensors and imaging devices have since been developed which exploit the unique properties of these materials and respond to physical, chemical and biological variables. Many exhibit characteristics and capabilities with the potential to overcome the limitations of conventional devices.

This provides details of a range of recently developed sensors based on the newly discovered families of metamaterials.