Search results

The purpose of this paper is to evaluate the effects of substituting cow milk with soy milk in the standard milk chocolate recipe on the physical, chemical and sensory qualities of milk chocolate and obtain the best ratio of substitution.

Milk chocolates were produced by substituting the cow milk in the standard recipe with soy milk powder at different ratios of soy milk to cow milk. Physical and chemical analyses were carried out using the standard methods to evaluate the major raw materials and chocolate samples, and the sensory evaluation of the chocolate samples was carried out using preference and difference tests.

Soy milk contained the highest crude protein and crude fiber. The cut test results of the cocoa beans showed that the percentage of fully fermented cocoa beans was in agreement with the standard. Residimeter value (RV) of four chocolate samples (30:70, 20:80, 10:90, and 0:100) was the best. The nitrogen content and melting points of the chocolates samples were found to increase with increased inclusion of soy milk powder in the recipe. There was no significant difference (p<0.05) in taste, sweetness, smoothness, and overall acceptability of the 0:100 and 30:70; soy milk to cow milk samples.

Soy-chocolate will be a new chocolate product with higher melting point and lower cost than the standard milk chocolate. The selling price of chocolate will be lower and thus affordable to low-income earners. Also, there will be an increased utilization of soybean.

Soy-chocolate recipe is a new and additional recipe for the production of milk chocolate.

Chocolates imported into Nigeria melt at tropical room temperature, causing bloom formation in storage. This situation may be responsible for the low consumption of chocolate in Nigeria. This study therefore focused on the production and evaluation of thermo‐resistant chocolate that is not heat labile at tropical ambient temperature.

Studies were carried out in two stages. The first stage was the incorporation of cornstarch at different percentages of 2.5, 5.0, 7.5 and 10.0 per cent and the second stage was the use of gelatin at 2.5, 5.0, 7.5 and 10.0 per cent.

At 10 per cent inclusions of cornstarch and gelatin, the two non‐conventional chocolates melted at temperatures between 40‐50°C, compared to that of conventional milk chocolate which melts at temperatures between 25‐33°C.

The two non‐conventional chocolates compared favourably with the conventional milk chocolate in terms of colour, taste, smoothness and overall acceptability. However, the non‐conventional chocolate was found to be thermo‐stable at tropical ambient temperatures. The production of these thermo‐resistant chocolates will allow the wide distribution, display and consumption of chocolate in the tropics, especially Nigeria.

This study aims to synthesize pigment and resin from agro-wastes and use them in the formulation of eco-friendly surface coatings.

The pigments and resin were synthesized through a chemical modification of agro-wastes. The pigments were characterized by infrared spectroscopy (FTIR) and were screened for their antimicrobial activities. The physicochemical characteristics of the cashew nutshell liquid (CNSL)-modified resin were evaluated. These precursors and other natural additives were used to formulate surface coatings, and their drying and adhesive properties were evaluated using international testing methods.

It was observed that the curing of the CNSL-modified resin depended on time and temperature. The pigments exhibited antimicrobial activity against E. coli and S. aureus and had high melting points, affirming their stability. The chemically modified precursors successfully yielded surface coatings with acceptable drying times and adhesion to the base substrate.

The use of agro-wastes as the main components of the surface coatings implies waste valorization, a reduction in production costs and the creation of job opportunities for sustainable development. To increase the chemical, physical, corrosion resistance and antimicrobial qualities of paint compositions, chemically modified peanut skin extracts and CNSL can be used as pigments and resins, respectively. This could be a green approach to achieving the targets of Sustainable development goals 11 and 12.

The paper outlines a prospective approach to use unwanted waste (peanut skin, cashew nutshells) and other natural additives as industrial raw materials. These novel surface coating precursors are cost-effective, readily available, eco-friendly and could replace conventional precursors.

Although milk is considered a vital source of nutrition for the livelihood, as the beginning of civilization, its antioxidant potential is required to be improved. This paper aims to increase antioxidant activities in milk and soy milk (Glycine max L.) has been found as a good compatible source. Hence, the present work was planned to investigate the impact of blending of different proportions of soy milk with standardized milk (i.e. 50 per cent soy milk with 50 per cent standardized milk, 60 per cent soy milk with 40 per cent standardized milk, 70 per cent soy milk with 30 per cent standardized milk and 100 per cent standardized milk as control sample) on antioxidant properties and sensory attributes of the blends.

Antioxidant properties of the blends were determined in terms of 2,2-diphenyl-1-picrylhydrazyl, ferric reducing antioxidant power and total phenol content. Sensory evaluation was carried out using a nine-point hedonic scale based on four selected quality attributes (i.e. smell, taste, color and appearance and mouthfeel) and ranked for their quality traits by fuzzy modeling.

A blend containing 70 per cent soy milk with 30 per cent standardized milk showed the highest antioxidant activities as compared to control milk sample (p < 0.05). Blend of 50 per cent soy milk with 50 per cent standardized milk was found most acceptable on the basis of sensory analysis and its antioxidant activities were also appreciable as compared to control milk sample (p < 0.05). Smell, taste, color and appearance and mouthfeel influenced the acceptability of formulated milk samples in decreasing order of significance (p < 0.05).

The present attempt has been made to formulate liquid milk by mixing standardized milk and soy milk, in which enhancement in the antioxidant activities of standardized milk and masking of off-flavor of soy milk is done. It is not done before and it may improve the nutritional and commercial value of the milk. Further, fuzzy modeling used for choosing appropriate blend in terms of sensory scores is also found as a novel approach.

This research aims to update the literature about the importance of reliability in supply chain (SC) and to find out the SC determinants.

This research surveys while contributing to the academic grasp of supply chain reliability (SCR) concepts. The study found 45 peer-reviewed publications using a structured survey technique with a four-step filtering process. The filtering process includes data reduction processes such as an evaluation of abstract and conclusion. The filtered study focuses on SCR and its determinants.

One of the major findings is that most of the study has focused on mathematical and conceptual studies. Also, this study provides the answer to a question like how can reliability be better accepted and evolved within the SC after finding the determinants of SCR.

The observed methodological gap in understanding and development of SCR was identified and classified into three categories: mathematical, conceptual and empirical studies (case studies and survey’s mainly). This research will aid academics in developing and understanding the determinants of SCR.

The purpose of this paper is to describe a project designed with the aim of developing a black and green tea processing technology for Nigerian farmers and evaluate the conformance of the quality of the processed tea to the recommended international standard.

Locally processed and graded black teas were collected from Kakara and Bangoba for analysis. Different grades analyzed were Dust 1, Pekoe fanning (PF), broken pekoe (BP) and Fibre. Green tea was also processed from 21 tea clones selected from the Cocoa Research Institute, Kusuku Station tea plantation located at 1,840 m above mean sea level and analyzed for quality characteristics. The methods used for the quality of black and green teas analysis were in accordance with ISO standard: ISO 9768 method (revised) was used for determining % water extract, ISO 5498 for crude fibre, ISO 1575 for % total ash, and ISO 1577 for acid insoluble ash. Other additional quality parameters evaluated for black tea were theaflavins (TF), thearubigins (TR) and colour brightness (C Br) from another set of 17 clones using flavonost methods. Conformance to ISO standard were assessed in all tea locally processed by the farmers, in comparison to the ones processed under controlled conditions.

The results obtained in this study revealed that 59.2 per cent of the tea analyzed conformed to ISO 9768, 81.5 per cent to ISO 5498, 77.8 per cent to ISO 1575 and 96.3 per cent to ISO 1576 and 100 per cent conformed to ISO 1577 and 85.2 per cent to ISO 1578 respectively. In all, only 33 per cent of the processed tea conformed to international standard for black or green tea physical parameters. As for black tea, clones which conformed to correct TF, TR, CBR are UNK, 367, 19, 74, 354, 368, 369, 353, 357, 143, 14 and 108 respectively.

The paper shows that production of green tea and black tea can be done locally without loss of quality if good manufacturing practices and hygiene practices are followed.

The use of clonal materials sourced locally that conformed to ISO standard from Nigeria could create new products (black and green tea) with high economic values to the farmers.

Green Lean Six Sigma (GLSS) is a comprehensive approach that aims to reduce waste, emissions and non-value added activities, thus mark an effective impact on sustainability of firms. Despite the numerous benefits of GLSS implementation, it is evident that Micro Small and Medium Enterprises (MSMEs) are still struggling to understand, integrate and implement this strategy. This research work provides a comprehensive analysis of GLSS within MSMEs and proposes a conceptual integration framework of GLSS for improving economic and environmental dimensions of sustainability MSMEs.

A systematic literature review (SLR) methodology was planned to assess and analyse the research articles from 2007 to 2022. Different key elements of GLSS such as barriers, enablers and tool sets have been thoroughly reviewed and analysed for MSME organisations to understand their behaviour and effectively adopt the GLSS approach in their operations.

This study provides the analysis of different perspectives of GLSS and this will contribute to improve different metrics related to emissions and quality in MSMEs. It provides MSMEs industrial managers with a comprehensive knowledge base of GLSS elements, enabling effective deployment.

The present study provides a significant knowledge base and know-how of GLSS to researchers that will assist in deploying this sustainable approach in different industrial domains. The study also assists industrial managers by providing a systematic framework of GLSS for MSMEs. Further, the study also supports society by proving pathway to improve the environmental dynamics through the execution GLSS.

The study is of the first kind that review different facets of GLSS related to MSME. The study not only enhances theoretical know how of GLSS but also guides practitioners how to implement comprehensive GLSS program for improved environmental sustainability.