Search results

The purpose of this paper is to investigate a supply chain consisting of a producer and multiple suppliers of a type of component needed for the production of a certain product. The effects of carbon emission taxes, quality of components and human inspection errors as well as the collaboration among the supply chain members are considered.

A mathematical model is formulated for a non-collaborative supply chain, and the optimal policy is shown to be the solution of a constraint optimization problem. The mathematical model is modified to the case of a collaborative supply chain and to account for inspection errors. Algorithms are provided, and a numerical example is given to illustrate the determination of the optimal policy.

This study offers a new conceptual and analytical model that analyzes the production problem from a supply chain perspective. Human resource management practices and environmental aspects were incorporated into the model to reduce risk, optimally select the suppliers and properly maximize profit by accounting for human inspection error as well carbon emission taxes. Algorithms describing the determination of the optimal policy are provided.

This study provides practical results that can be useful to researchers and managers aiming at designing sustainable supply chains that incorporate economic, environmental and human factors.

This study can be useful to researchers and managers aiming for designing sustainable supply chains that incorporate economic and human factors.

This empirical study aims to investigate the erosion wear performance of two different 3D-printed materials (acrylonitrile butadiene styrene [ABS] and polylactic acid [PLA]) with various micro textures. The two different textures (prism and square) were created over the surfaces of both materials by using the 3D-printed technique.

The erosion experiments on both materials were performed by using Ducom Erosion Jet Tester. Erosion tests were performed at four different impacting velocities (15, 30, 45 and 60 m/s) with the four different particle sizes (17, 39, 63 97 µm) at the impact angles (30°–90°) for the time duration of 5, 10, 15 and 20 min. The two different textures prism and cone were used for performing the erosion experiments. Taguchi’s orthogonal L16 (mixed level) was used to reduce the number of experiments and to determine the impact of these parameters on erosion wear performance of both 3D-printed materials.

The PLA with cone texture was found to be best (against erosion) than the ABS cone and prism textures due to their high hardness (68 HV). Also, the average signal to noise (S/N) ratio for PLA and ABS was measured as 56.4 and 44.4 dB, respectively. As the value of the S/N ratio is inversely proportional to the erosion rate, the PLA has the least erosion rate as compared to the ABS. The sequence of erosion wear influencing parameters for both materials was in the following order: velocity > erodent size > texture > impact angle > time interval.

Both PLA and ABS with different micro textures for erosion testing were studied with Taguchi’s optimization method, and the erosion mechanisms are well analyzed by using scanning electron microscopy and Image J techniques.

This paper aims to obtain a symmetrical step-down topology with lower equivalent capacity and wider step-down range under the condition of the same output. Two new symmetrical step-down topologies of star-connected autotransformers are proposed in this paper. Taking the equivalent capacity as the main parameter, the obtained topologies are modeled and analyzed in detail.

This paper adopts the research methods of design, modeling, analysis and simulation verification. First, the star-connected autotransformer is redesigned according to the design objective of symmetrical step-down topology. In addition, the mathematical model of two topologies is established and a detailed theoretical analysis is carried out. Finally, the theoretical results are verified by simulation.

Two symmetrical star-connected autotransformer step-down topologies are designed, the winding configurations of the corresponding topology are presented, the step-down ranges of these three topologies are calculated and the influence of step-down ratio on the equivalent capacity of autotransformer are analyzed. Through analysis, the target step-down topologies are obtained when the step-down ratio is [1.1, 5.4] and [1.1, 1.9] respectively.

Because the selected research object is only a star-connected autotransformer, the research results may lack generality. Therefore, researchers are encouraged to further study the topologies of other autotransformers.

This paper includes the implications of the step-down ratio on the equivalent capacity of autotransformers and the configuration of transformer windings.

The topologies designed in this paper enable star-connected autotransformer in the 12-pulse rectifier to be applied in step-down circumstances rather than situations of harmonic reduction only. At the same time, this paper provides a way that can be used to redesign the autotransformer in other multi-pulse rectifier systems, so that those transformers can be used in voltage regulation.

This paper aims to depict the erosion performance of two HVOF-coated micron layers (Colmonoy-88 and Stellite-6) on pump impeller steel (SS-410) by using Taguchi's method. Taguchi's array (L16) was used to optimize the erosion wear (in terms of weight loss) by using four influencing parameters such as rotational speed, solid concentration, average particle size and time which were varied at four different levels.

The experiments were carried out by using a Ducom slurry tester with rotational speed in the range of 750-1,500 rpm, solid concentration of 35-65 per cent by weight, time period of 75-210 min and average particle sizes in the range of < 53 to 250 µm. Bottom Ash with a nominal size range of < 53 to 250 µm was used as erodent. The process parameters were optimized by using Taguchi's method. The ANOVA method was used to validate the results given by Taguchi's method.

The results revealed that the presence of both carbides and borides and the additional presence of Cr in Colmonoy-88 coating enhancing the slurry erosion resistance of Colmonoy-88 coating. Moreover, the chromium and tungsten carbide particles help in increasing the bond strength between the coating and the substrate material. Further, it was also found that the time was the most dominant factor as compared to other factors.

The very less work has been reported on optimization of erosion wear response of Colmonoy-88 and Stellite-6 coatings by using different design of experiment techniques. Further, the erosion wear mechanism of both coatings has been studied by using image j analysis software.

This study investigates a production process that requires N kinds of components for the production of a finished product. The producer orders the various kinds of components from different suppliers and receives the orders in lots at the beginning of each production cycle. Similar to situations often encountered in real life, the lead times are random variables with known probability distributions so that a production cycle starts whenever all N kinds of components become available. Each of the lots received at the start of a production run contains both perfect and imperfect quality components. Once all N kinds of components become available, the producer initiates a screening process to detect the imperfect components. The production of the finished product uses only perfect quality components. The imperfect components are removed from inventory whenever the screening process is completed. The percentage of components of perfect quality present in each lot is a random variable with a known probability distribution.

This production process is described and modeled mathematically and the optimal production/ordering policy is derived based on the mathematical model.

The formulated mathematical model resulted in the determination of the optimal policy consisting of the optimal number of finished items ordered to be produce during each production run, the number of components ordered from each supplier, and the reorder point. The derived closed form expression for the optimal lot size depends on the minimum of the number of perfect quality components in a lot, whereas the reorder point is determined based on the maximum lead time.

The modeling approach and results of this study provide practical implications that may be beneficial to both production and supply chain managers as well as researchers.

This modeling approach that incorporates decision-making related to the logistics of acquiring the components and accounts for the probabilistic nature of the lead times and quality of components addresses a gap in the logistics/production literature.

Amidst the backdrop of a wide array of structural developments that have revolutionized the competitive landscape of Indian commercial banking, this paper aims to empirically examine the role of two external monitoring mechanisms – competition and concentration on financial stability and further highlights the significance of bank-level heterogeneity in the nexus.

The study uses the Lerner index, defined through a translog specification, as a measure of market power. A system generalized method of moments technique accounts for the dynamic associations among the competition-concentration-stability nexus. The study further examines the moderating effect of ownership, size and capitalization on the nexus. The study also uses the Boone indicator and comments on the competition-bank stability relationship after controlling for bank governance.

The findings indicate that banks are less stable in a more competitive and higher concentrated environment. Exploring bank-level heterogeneity, first, the authors report that as competition increases, state-owned banks have greater incentives to undertake risky activities than private and foreign banks, which point to implicit sovereign guarantees that characterize the former. Second, the authors document an adverse influence of competition on the soundness of larger banks consistent with the “too-big-to-fail” assertion. Third, results corroborate the disciplinary role of regulatory capital and lend support to stricter capital norms under Basel III in a more competitive environment.

This paper is perhaps the first to capture competition and concentration in a single model; to reconcile conflicting evidence on competition-risk nexus; to shed light on the joint effect of competition and Basel accords for Indian banks.

The study evaluated the interlinkages and diversification opportunities in the context of emerging bond markets from 2007:1 to 2020:5, using the vector autoregressive (VAR) model and sub‐period analyses to compare BRIC (2007:1–2010:11) and BRICS (2010:12–2020:5) regimes. As indicated by the breaking unit‐root test, dummies for the global financial crisis and COVID‐19 were incorporated in the analyses. VAR results showed that the Indian bond market responds positively to the previous change in the Chinese bond market during the BRIC era while BRICS bond markets are mostly uninfluenced by prior behavior patterns of one another. These suggested that the diversification opportunity has been increased following the admission of South Africa to the league. In addition, variance decomposition and impulse response provide proofs to suggest that BRICS bond markets are more exogenous and independent compared to what is obtained during the BRIC period. Consequently, the authors concluded that the BRICS bloc has provided greater diversification opportunities for emerging markets’ bondholders in the recent past.

One of the most marginalized communities in India is the Lesbian, Gay, Bisexual and Transgender (LGBT) community which commonly experiences discrimination. Many studies have countered that the LGBT community faces high discrimination in the banking and financing industry. As a result, this study concentrates on this marginalized community and its acceptance and continuation habit regarding mobile wallets. Consequently, this study has considered continuance intentions as a response to confirm the progress of the mobile-wallet industry. Also, this study tried to study the relationship between behavioral intention (BI) and continuous intention (CI) which is seriously lacks in the library of literature. The research operationalized the stimulus–organism–response (SOR) framework for the conceptual model and surveyed 100 self-proclaimed members of the LGBT community in India. The analysis has been done using the partial least structure (PLS). The findings demonstrate that variables like perceived trust (PT) directly influence the BI. On the other hand, variables like perceived ease of use (PEoU), social influence (SI), and satisfaction (S) doesn’t influence BI of the LGBT Community. The main outcome was a favorable association between BI and CI. It will help the stakeholders to understand how important this new market avenue is and how it can be explored. To ensure safe and secure transactions, a group think tank composed of important parties (financial institutions, mobile-wallet providers, the government, security specialists, etc.) should make recommendations. Mobile-wallet providers will attain benefit from this study’s understanding of user categories and ability to tailor their service offers as per the community.

Purpose: The study aims to explore the wider acceptance of blockchain technology and growing faith in this technology among all business domains to mitigate the chances of fraud in various sectors.

Design/Methodology/Approach: The authors focus on studies conducted during 2015–2022 using keywords such as blockchain, fraud detection and financial domain for Systematic Literature Review (SLR). The SLR approach entails two databases, namely, Scopus and IEEE Xplore, to seek relevant articles covering the effectiveness of blockchain technology in controlling financial fraud.

Findings: The findings of the research explored different types of business domains using blockchains in detecting fraud. They examined their effectiveness in other sectors such as insurance, banks, online transactions, real estate, credit card usage, etc.

Practical Implications: The results of this research highlight (1) the real-life applications of blockchain technology to secure the gateway for online transactions; (2) people from diverse backgrounds with different business objectives can strongly rely on blockchains to prevent fraud.

Originality/Value: The SLR conducted in this study assists in the identification of future avenues with practical implications, making researchers aware of the work so far carried out for checking the effectiveness of blockchain; however, it does not ignore the possibility of zero to less effectiveness in some businesses which is yet to be explored.