Search results

Reports on the preparation of some organic corrosion inhibitors, carried out by the reaction of epoxidized linseed oil free fatty acids with different aliphatic amines under the effect of γ‐ray irradiation. Notes that chemical and instrumental methods were used for identification of the reaction products and that the prepared inhibitors were tested for corrosion protection of steel surfaces by incorporating them in some chlorinated rubber varnishes. Reports that the physical, chemical and corrosion protective properties of the varnish films were studied. Concludes that the prepared inhibitors can be used in small quantities to provide varnishes of excellent adhesion and superior protective properties. Contends, also, that increase of the radiation dose during preparation of the inhibitors and/or during the drying process of the varnish films increases the protective properties of the formed films.

The challenges confronting the Nigerian construction industry which led to the adoption of supply chain management (SCM) practice were evaluated in this chapter. It was discovered that the Nigerian construction industry is confronted with fragmentation and poor information management. The stakeholders within the Nigerian construction industry proposed the adoption of SCM to overcome the fragmentation and other shenanigans facing the industry. This chapter revealed that construction supply chain (CSC) practices within the Nigerian construction industry focus on waste elimination by adopting the lean concept. The focus on the lean concept could be attributed to the numerous research related to lean or the enormous waste emanating from the Nigerian construction industry. Regardless of the emphasis on lean, the Nigerian CSC is still confronted with fragmentation and heavy waste generation. Thus, this chapter proposed the adoption of principles and technologies driven by the fourth industrial revolution (4IR) is a paradigm shift for the management of CSC in the country. It was discovered in this chapter that Nigerian construction supply stakeholders had not embraced the technologies and principles of the 4IR. The failure to adopt the technologies driven by the 4IR is attributed to the absence of a CSC model that depicts the management of CSC in alignment with the 4IR. This chapter called for developing a SCM model for the Nigerian construction industry in tandem with the principles and technologies of the 4IR.

This study aims to examine whether chief executive officer (CEO) pay-performance sensitivity to shareholder wealth is related to the use of non-financial performance measures in incentive contracts.

Using hand-collected performance measure data in a sample of S&P 500 firms across the period 1994–2010, this study investigates the sensitivity of CEO bonus and cash pay to shareholder wealth of firms that use non-financial performance (NFPM) measures of varying types and contractual weights in their bonus contracts along with financial measures (NFPM firms) in comparison to that of firms using financial measures only (FPM firms).

This study finds evidence that the pay-performance sensitivity is stronger in NFPM firms than in FPM firms. These results are driven by the use of CEO individual goals and operational efficiency. Furthermore, when using environmental, social and governance factors, the pay-performance sensitivity is stronger in terms of accounting performance only. This study also finds that using NFPM enhances pay-performance sensitivity more as their contractual weights increase and as financial risk increases.

These findings are important to stakeholders, and especially regulators in understanding incentive effects of alternative performance measures. This study also sheds light on what types of non-financial measures are better in helping firms align CEOs’ incentives to shareholders’ interests.

This study contributes to prior research on benefits of non-financial information within the context of executive compensation. This study presents original results about the effects of contractual weights of non-financial measures and financial risk on CEO pay-performance sensitivity. This study also presents new insights regarding how different types of non-financial measures affect CEO pay-performance sensitivity.

The purpose of this paper is to investigate the steady 2D buoyancy effects on MHD flow over a permeable stretching sheet through porous medium in the presence of suction/injection.

Similarity transformations are employed to transform the governing partial differential equations into ordinary differential equations. The transformed equations are then solved numerically by a shooting technique.

The working fluid is examined for several sundry parameters graphically and in tabular form. It is observed that with an increase in magnetic field and permeability of porous parameter, velocity profile decreases while temperature and concentration enhances. Stretching sheet parameter reduces velocity, temperature and concentration, whereas it increases skin friction factor, Nusselt number and Sherwood number.

Till now no numerical studies are reported on the effects of heat source and thermal radiation on MHD flow over a permeable stretching sheet embedded in porous medium in the presence of chemical reaction.

The purpose of this paper is to address the combined effects of thermal radiation and chemical reaction on steady MHD mixed convective heat and mass transfer flow past a vertical surface under the influence of Joule and viscous dissipation.

The governing system of partial differential equations is transformed to dimensionless equations using dimensionless variables. The dimensionless equations are then solved analytically using perturbation technique.

With the help of graphs, the effects of the various important parameters entering into the problem on the dimensionless velocity, dimensionless temperature and dimensionless concentration fields within the boundary layer are discussed. The authors noticed that the velocity increases with an increase in the porosity parameter. An increase in the Prandtl number Pr, decreases the velocity and the temperature field. An increase in the radiation parameter, decreases the velocity and the temperature field. Also the effects of the pertinent parameters on the skin-friction coefficient and rates of heat and mass transfer in terms of the Nusselt and Sherwood numbers are presented numerically in tabular form.

To the best of the authors’ knowledge, recent this work has not been finished by any other researchers.

This study aims to compare capital structure determinants' effect on the leverage levels of Shariah-compliant (SC) and noncompliant (NC) firms in Pakistan. This study also estimates and compares the capital structure adjustment speed for both firm types.

Based on the Karachi Meezan Index screening criterion, a balanced panel of 117 SC and 68 NC firms listed on the Pakistan Stock Exchange from 2008 to 2018 was constituted. This study used the generalized method of moments to identify the significant determinants of capital structure and estimate the speed of adjustment. In addition, the F-test was used to check whether the effect of the determinants on the leverage is same for SC and non-SC firms.

The authors found that different determinants affect both firm types' leverage levels (book and market) differently. The authors also found that the adjustment speed of SC firms toward their target leverage ratio is slower than their NC peers. Lastly, significant variation was observed in the results under different screening criteria.

This study fills the literature gap by providing a comprehensive comparison of the capital structure decisions of the SC and non-SC firms. Because this study is limited to Pakistan, generalizability would be an issue.

This study will guide the management of SC and non-SC firms about which factors are reliably important in choosing their capital structure. The findings also call for bringing harmony in the different Shariah screening criteria being in practice.

To the best of the authors’ knowledge, this is the first comparative study that identifies the significant capital structure determinants for SC and NC firms and investigates their effect on the leverage of both firm types. By testing joint hypotheses of same relationship, this study seeks to determine if, because of Shariah restrictions, the capital structure determinants of SC firms are similar to NC firms or they exhibit different behavior. The authors also repeat their analysis using other prominent screening criteria to assess the consistency of their results.

In recent times, mobile banking has become the best alternative for transactions associated with payments like bills, fees, and peer-to-peer payments. Therefore, the pace of adoption is increasing day after other. However, the numbers of customers are not equal to the expectations as there are several challenges and threats hindering in the way of excellence and growth of mobile banking. Therefore, this chapter has been written purposively to address all the elements that are associated with the use of mobile banking with special emphasis on Pakistan and other developing sides of Asia. In fact, concern towards Asian sides is mandatory as the continent has the massive charm to attract users towards the use of mobile banking, but there is a need for proper policy and concern from stakeholders in order to give a push to the technology, which is fruitful for society, environment, as well as economy. The study includes an in-depth discussion on factors that need attention to make the study implicative and thorough for conducting further research in the field of Fin-Tech and mobile banking.

This paper aims to achieve two main objectives. First, to introduce to the literature a new versatile active building block, namely, voltage differencing differential voltage current conveyor (VD-DVCC) for analog signal processing applications. Second, to design a novel electronically tunable mixed-mode universal filter. The designed filter provides low-pass, high-pass, band-pass, band-reject and all-pass responses in voltage-mode (VM), current-mode (CM), trans-impedance-mode (TIM) and trans-admittance-mode (TAM).

The proposed filter uses two VD-DVCCs, three resistors and two capacitors. All the capacitors used are grounded, which is advantageous from the monolithic integration point of view. The VD-DVCC is designed and validated in Cadence software using CMOS 0.18 µm process design kit from Silterra Malaysia at a supply voltage of ±1 V.

The proposed novel filter enjoys many attractive features including as follows: the ability to operate in all four modes, no requirement of capacitive matching, tunability of quality factor (Q) independent of pole frequency, availability of both inverting and non-inverting outputs for VM and TIM mode, high output impedance explicit current output for CM and TAM, no requirement for double/negative input signals (voltage/current) for response realization and low active and passive sensitivities. The filter is designed for a pole frequency of 5.305 MHz. The obtained results bear a close resemblance with the theoretical findings.

The proposed novel filter structure requires a minimum number of active and passive components and provides operation in all four operating modes. The filter will find application in structures of mixed-mode systems.

The purpose of this paper is to examine the magneto hydrodynamic flow and heat transfer of nanofluids over a permeable wedge based on engine oil which is under the effects of thermal radiation and convective heating.

The equations governing the flow are transformed into differential equations by applying similarity transformations. Keller box method is used to bring out the numerical solution.

The discovery interprets that temperature as well as the velocity of Ag-engine oil nanofluids are more noticeable than Cu-engine oil nanofluids. Thermal boundary layer increases for radiation parameter as well as Biot number. Fluctuations of co-efficient of drag skin friction as well heat transfer rate at the wall are also tested.

Till now, no numerical studies are reported on the heat transfer enhancement of the permeable wedge under thermal radiation on engine oil nanofluid flow by considering convective heating.

The purpose of this paper is to consider the problem of thermal destratification facing engineers and scientists during the motion of fluids which consist of rigid and randomly oriented particles suspended in a viscous medium under the influence of Lorentz force. This paper provides an insight into the non-linear transfer of thermal radiation within the boundary layer.

Similarity transformation and parameterization of the non-linear partial differential equation are carried out. The approximate analytical solution of the governing equation which models the free convective flow of strong and weak concentration of micro-elements in a micropolar fluid over a vertical surface is presented.

It is observed that the velocity and temperature distribution are decreasing properties of thermal stratification parameter S_t. Maximum local skin friction coefficients are ascertained at an epilimnion level (S_t=0) when the magnitude of thermal radiation is small. Thermal stratification parameter has no significant effect on the temperature distribution in the flow near a free stream.

The relationship between stratification of temperature and the transfer of thermal energy during the problem of thermal destratification facing engineers and scientist during the motion of fluids which consist of rigid and randomly oriented particles suspended in a viscous medium under the influence of Lorentz force is unravelled in this paper.