Search results

The purpose of this study, most recent advancements in threedimensional (3D) printing have focused on the fabrication of components. It is typical to use different print settings, such as raster angle, infill and orientation to improve the 3D component qualities while fabricating the sample using a 3D printer. However, the influence of these factors on the characteristics of the 3D parts has not been well explored. Owing to the effect of the different print parameters in fused deposition modeling (FDM) technology, it is necessary to evaluate the strength of the parts manufactured using 3D printing technology.

In this study, the effect of three print parameters − raster angle, build orientation and infill − on the tensile characteristics of 3D-printed components made of three distinct materials − acrylonitrile styrene acrylate (ASA), polycarbonate ABS (PC-ABS) and ULTEM-9085 − was investigated. A variety of test items were created using a commercially accessible 3D printer in various configurations, including raster angle (0°, 45°), (0°, 90°), (45°, −45°), (45°, 90°), infill density (solid, sparse, sparse double dense) and orientation (flat, on-edge).

The outcome shows that variations in tensile strength and force are brought on by the effects of various printing conditions. In all possible combinations of the print settings, ULTEM 9085 material has a higher tensile strength than ASA and PC-ABS materials. ULTEM 9085 material’s on-edge orientation, sparse infill, and raster angle of (0°, −45°) resulted in the greatest overall tensile strength of 73.72 MPa. The highest load-bearing strength of ULTEM material was attained with the same procedure, measuring at 2,932 N. The tensile strength of the materials is higher in the on-edge orientation than in the flat orientation. The tensile strength of all three materials is highest for solid infill with a flat orientation and a raster angle of (45°, −45°). All three materials show higher tensile strength with a raster angle of (45°, −45°) compared to other angles. The sparse double-dense material promotes stronger tensile properties than sparse infill. Thus, the strength of additive components is influenced by the combination of selected print parameters. As a result, these factors interact with one another to produce a high-quality product.

The outcomes of this study can serve as a reference point for researchers, manufacturers and users of 3D-printed polymer material (PC-ABS, ASA, ULTEM 9085) components seeking to optimize FDM printing parameters for tensile strength and/or identify materials suitable for intended tensile characteristics.

This paper presents an experimental investigation in establishing the relationship between FDM process parameters and tensile strength of polycarbonate (PC) samples using the I-Optimal design.

I-optimal design methodology is used to plan the experiments by means of Minitab-17.1 software. Samples are manufactured using Stratsys FDM 400mc and tested as per ISO standards. Additionally, an artificial neural network model was developed and compared to the regression model in order to select an appropriate model for optimisation. Finally, the genetic algorithm (GA) solver is executed for improvement of tensile strength of FDM built PC components.

This study demonstrates that the selected process parameters (raster angle, raster to raster air gap, build orientation about Y axis and the number of contours) had significant effect on tensile strength with raster angle being the most influential factor. Increasing the build orientation about Y axis produced specimens with compact structures that resulted in improved fracture resistance.

The fitted regression model has a p-value less than 0.05 which suggests that the model terms significantly represent the tensile strength of PC samples. Further, from the normal probability plot it was found that the residuals follow a straight line, thus the developed model provides adequate predictions. Furthermore, from the validation runs, a close agreement between the predicted and actual values was seen along the reference line which further supports satisfactory model predictions.

This study successfully investigated the effects of the selected process parameters - raster angle, raster to raster air gap, build orientation about Y axis and the number of contours - on tensile strength of PC samples utilising the I-optimal design and ANOVA. In addition, for prediction of the part strength, regression and ANN models were developed. The selected ANN model was optimised using the GA-solver for determination of optimal parameter settings.

The proposed ANN-GA approach is more appropriate to establish the non-linear relationship between the selected process parameters and tensile strength. Further, the proposed ANN-GA methodology can assist in manufacture of various industrial products with Nylon, polyethylene terephthalate glycol (PETG) and PET as new 3DP materials.

This study aims to enhance merging of additive manufacturing (AM) techniques with powder injection molding (PIM). In this way, the prototypes could be 3D-printed and mass production implemented using PIM. Thus, the surface properties and mechanical performance of parts produced using powder/polymer binder feedstocks [material extrusion (MEX) and PIM] were investigated and compared with powder manufacturing based on direct metal laser sintering (DMLS).

PIM parts were manufactured from 17-4PH stainless steel PIM-quality powder and powder intended for powder bed fusion compounded with a recently developed environmentally benign binder. Rheological data obtained at the relevant temperatures were used to set up the process parameters of injection molding. The tensile and yield strengths as well as the strain at break were determined for PIM sintered parts and compared to those produced using MEX and DMLS. Surface properties were evaluated through a 3D scanner and analyzed with advanced statistical tools.

Advanced statistical analyses of the surface properties showed the proximity between the surfaces created via PIM and MEX. The tensile and yield strengths, as well as the strain at break, suggested that DMLS provides sintered samples with the highest strength and ductility; however, PIM parts made from environmentally benign feedstock may successfully compete with this manufacturing route.

This study addresses the issues connected to the merging of two environmentally efficient processing routes. The literature survey included has shown that there is so far no study comparing AM and PIM techniques systematically on the fixed part shape and dimensions using advanced statistical tools to derive the proximity of the investigated processing routes.

This paper aims to evaluate the mechanical behaviour of polycarbonate/acrylonitrile butadiene styrene (PC/ABS) filaments for fusion filament fabrication (FFF). PC/ABS have emerged as a promising material for FFF due to their excellent mechanical properties. However, the optimal processing conditions and the effect of the blending ratio on the mechanical properties of the resulting workpieces are still unclear.

A statistical factorial matrix was designed, including infill pattern, printing speed, nozzle size, layer height and printing temperature as factors (with three levels). A total of 810 workpieces were printed using PC/ABS blends filament with the FFF. The workpieces’ finishing and mass were evaluated. Tensile tests were performed. Analysis of variance was performed to determine the main effects of the processing conditions on the mechanical properties.

The results showed that the PC/ABS (70/30) exhibited higher tensile. Tensile rupture corresponded to 30% of the tensile strength. The infill pattern showed the highest contribution to the responses. The concentric pattern showed higher tensile strength. Tensile strength and mass ratio demonstrated the influence of mass on tensile strength. The influence of printing parameters on deformation depended on the blend proportions. Higher printing speed and lower layer height provided better quality workpieces.

This study has implications for the design and manufacturing of three-dimensional printed parts using PC/ABS filaments. An extensive experimental matrix was applied, aiming at a complete understanding of mechanical behavior, considering the main printing parameters and combinations not explored by literature.

The purpose of this paper is to compare the influence of relative density (RD) and strain rates on failure mechanism and specific energy absorption (SEA) of polyamide lattices ranging from bending to stretch-dominated structures using selective laser sintering (SLS).

Three bending and two stretch-dominated unit cells were selected based on the Maxwell stability criterion. Lattices were designed with three RD and fabricated by SLS technique using PA12 material. Quasi-static compression tests with three strain rates were carried out using Taguchi's L9 experiments. The lattice compressive behaviour was verified with the Gibson–Ashby analytical model.

It has been observed that RD and strain rates played a vital role in lattice compressive properties by controlling failure mechanisms, resulting in distinct post-yielding responses as fluctuating and stable hardening in the plateau region. Analysis of variance (ANOVA) displayed the significant impact of RD and emphasised dissimilar influences of strain rate that vary to cell topology. Bending-dominated lattices showed better compressive properties than stretch-dominated lattices. The interesting observation is that stretch-dominated lattices with over-stiff topology exhibited less compressive properties contrary to the Maxwell stability criterion, whereas strain rate has less influence on the SEA of face-centered and body-centered cubic unit cells with vertical and horizontal struts (FBCCXYZ).

This comparative study is expected to provide new prospects for designing end-user parts that undergo various impact conditions like automotive bumpers and evolving techniques like hybrid and functionally graded lattices.

To the best of the authors' knowledge, this is the first work that relates the strain rate with compressive properties and also highlights the lattice behaviour transformation from ductile to brittle while the increase of RD and strain rate analytically using the Gibson–Ashby analytical model.

This paper aims to examine the static compression characteristics of cell topologies in body-centered cubic with vertical struts (BCCZ) and face-centered cubic with vertical struts (FCCZ) along with novel BCCZZ and FCCZZ lattice structures.

The newly developed structures were obtained by adding extra interior vertical struts into the BCCZ and FCCZ configurations. The samples, composed of the AlSi10Mg alloy, were fabricated using the selective laser melting (SLM) additive manufacturing technique. The specific compressive strength and failure behavior of the manufactured lattice structures were investigated, and comparative analysis among them was done.

The results revealed that the specific strength of BCCZZ and FCCZZ samples with 0.5 mm strut diameter exhibited approximately a 23% and 18% increase, respectively, compared with the BCCZ and FCCZ samples with identical strut diameters. Moreover, finite element analysis was carried out to simulate the compressive response of the lattice structures, which could be used to predict their strength and collapse mode. The findings showed that while the local buckling of lattice cells is the major failure mode, the samples subsequently collapsed along a diagonal shear band.

An original and systematic investigation was conducted to explore the compression properties of newly fabricated lattice structures using SLM. The results revealed that the novel FCCZZ and BCCZZ structures were found to possess significant potential for load-bearing applications.

Adhesively bonded joints are used in many fields, especially in the automotive, marine, aviation, defense and outdoor industries. Adhesive bonding offers advantages over traditional mechanical methods, including the ability to join diverse materials, even load distribution and efficient thermal-electrical insulation. This study aims to investigate the mechanical properties of adhesively bonded joints, focusing on adherends produced with auxetic and flat surfaces adhered with varying adhesive thicknesses.

The research uses three-dimensional (3D)-printed materials, polyethylene terephthalate glycol and polylactic acid, and two adhesive types with ductile and brittle properties for single lap joints, analyzing their mechanical performance through tensile testing. The adhesion region of one of these adherends was formed with a flat surface and the other with an auxetic surface. Adhesively bonded joints were produced with 0.2, 0.3 and 0.4 mm bonding thickness.

Results reveal that auxetic adherends exhibit higher strength compared to flat surfaces. Interestingly, the strength of ductile adhesives in auxetic bonded joints increases with adhesive thickness, while brittle adhesive strength decreases with thicker auxetic bonds. Moreover, the auxetic structure displays reduced elongation under comparable force.

The findings emphasize the intricate interplay between adhesive type, bonded surface configuration of adherend and bonding thickness, crucial for understanding the mechanical behavior of adhesively bonded joints in the context of 3D-printed materials.

This study aims to investigate the comparative importance of factors influencing the customer shift behavior from conventional to Islamic banking for consumer finance in Pakistan.

First, a comprehensive analysis of the existing literature was conducted to identify a broad range of factors related to customer shift behavior. Through an expert sampling, 14 essential factors were chosen for further investigation. Second, a questionnaire was developed using the analytical hierarchy process (AHP). This questionnaire was then distributed among customers who had previously been using conventional banking services but had made a shift toward Islamic banking. The purpose of this questionnaire was to gather data and insights regarding their motivations and decision-making process behind the shift, and a sample 215 customers are taken in the study.

The results of AHP depicts that the religiosity is a most important factor influencing customers to shift from conventional to Islamic banking, and the second most important factor is pricing. The other subsequent important factors are reputation of the bank, marketing and promotion, service quality, behavior of banks staff, Shariah compliance, management, convenience, fastness and charges/fees. Whereas documentation, ambiance and recommendation are found least important factors to patronize Islamic banking.

The study recommends Islamic banks to create awareness, concentrating on religious factor to have a greater impact on growth of Islamic banking and shrinking of conventional banking. Further, it suggests Islamic banks to apply Shariah-recommended approach of doing business, to help community in best possible way and to launch differentiated marketing techniques to attract customers. It also proposes regulatory authorities to provide facilitation to Islamic banking business by providing level playing field similar to conventional banking, tax equality and conversion of public financing from conventional banking to Islamic banking.

The originality of this study lies in its comprehensive analysis of factors influencing consumer shift behavior from conventional to Islamic banking in the context of consumer finance in Pakistan. By using the AHP, the study provides a structured approach to understanding the relative importance of these factors. This is the uniqueness of the paper that it applies the AHP for the analysis. Furthermore, the study offers practical implications for Islamic banks and regulatory authorities to effectively address and capitalize on this consumer shift trend.

The purpose of this research is to examine the narratives of victims of abusive supervision. We explore the meaning or “lessons” victims derive from those experiences and how they shape the victims’ views of self, work and organization in relation to navigating their subsequent jobs.

We analyzed how appraisals of supervisory abuse transform victims’ narratives and their consequent work attitudes through sensemaking processes. Semi-structured interviews with the past victims of abusive supervision generated a four-stage model of how sensemaking shapes victims’ future work attitudes. Our interpretations were guided through narrative thematic analysis based on the constructionist approach.

Victims’ lessons learned are predominantly framed by their retrospective post-event appraisal of abuse (based on its severity) once individuals are no longer subject to abusive supervision. With greater distance from the abuse, victims can process the abuse and better understand the motivation of the abuser, enabling the process of causal attributions. These attributions further shape victims’ narratives and future work attitudes through a complex interplay of retrospective and prospective sensemaking mechanisms. The victims broadly reported proactive (with higher self-awareness and endurance) and reactive (self-protection, and emotional scars) lessons. A four-stage model was proposed based on our findings.

Abusive supervision remains a persistent issue experienced by many individuals at some point in their working life. However, little is known about how victims make sense of the event post-abuse and how this sense-making guides their future work behaviors. Understanding this phenomenon provides insight into how employees navigate through adversity and construct a more positive future. The contribution of this narrative inquiry is threefold. First, it explores how individual appraisals of supervisory abuse frame their (1) mechanisms of narrative construction; and (2) future work attitudes. Second, our findings demonstrate how narrative construction is a fluid process often informed by the process of retrospective and prospective sensemaking. Finally, our research suggests two broader categories of lessons that victims internalize and carry forward to their subsequent jobs.

Globally, the halal cosmetics market is experiencing rapid growth and is considered a key economic driver in shaping economy development and growth. However, the extant research on halal cosmetics is fragmented, potentially impeding the field’s advancement when challenged with conflicting viewpoints and limited replications. Therefore, this paper aims to address the knowledge gap by conducting a rigorous and technology-enabled systematic review by leveraging appropriate software to comprehensively evaluate the state of the halal cosmetics literature.

A domain-based review using a hybrid approach that incorporates both bibliometric and interpretive analyses are used to comprehensively assess the current progress of halal cosmetics, identify research gaps and suggest potential directions for future research.

Through a comprehensive review of 66 articles, this review provides a holistic and comprehensive overview of halal cosmetics that both academic scholars and market practitioners can rely upon in strategizing and positioning for future development of halal cosmetics. The study provides a holistic and comprehensive overview of halal cosmetics that both academic scholars and market practitioners can reply upon in strategizing and positioning for future development of halal cosmetics.

The fragmented knowledge of extant research on halal cosmetics across various disciplines limits a comprehensive understanding of the field. It is opportune to conduct a comprehensive and systematic review of the field, providing insight into both its current and future progress. In this regard, this review serves as a “one-stop reference” in providing a state-of-the-art understanding of the field, and enables industry practitioners to reveal the full potential and bridge the theory-practice gap in the halal cosmetics industry.