Search results

1 – 10 of 23
Article
Publication date: 11 July 2023

Amal Mohamed El-Moursy, Zeinab Mohmed Abdel Mageid, Manar Yahia Ismail Abd El-Aziz, Nour Asser and Osama Hakeim

Wearing clothes requires specifications for feeling comfortable, derived from the fibres, fabrics and finishing properties. This study aims to deal with the effect of economic…

Abstract

Purpose

Wearing clothes requires specifications for feeling comfortable, derived from the fibres, fabrics and finishing properties. This study aims to deal with the effect of economic blends containing hollow fibres, bamboo and cotton/polyester waste on the mechanical properties of the produced fabrics and the appropriate end use.

Design/methodology/approach

This research included two blends: one consisted of cotton/polyester wastes blended with bamboo and the other to which Chorisia fibres were added. Two weft counts 10,6/1 Ne were made from each blend, which were used to produce four fabric samples (S1 Chorisia-free and S2 with Chorisia); additionally, another two samples were dyed that contain Chorisia (S3) from each count. The six samples were tested by Kawabata Evaluation System (KES).

Findings

The samples gave a good total hand value (THV) for use as men's winter suits, where the thicker count 6/1, with and without Chorisia had better properties, also both counts 6, 10/1 with dye. The hollow fibres affected the fabrics’ properties, including thickness, shear, bending, thermal conductivity and weight. Both blends had a positive effect on THV.

Research limitations/implications

Cotton/polyester waste, Chorisia and bamboo fibres were tested, and 2% Remazol Yellow GNL dye was used.

Practical implications

The ratio of blending, weft counts and dye affected the fabric’s properties, with consequences for the use of the Kawabata system and its applications.

Social implications

The fabrics used in this research may be considered to be economical and have good THV.

Originality/value

The study proved the usefulness of fabrics made of two blends. The Chorisia component may be seen as a good alternative to cotton fibres to reduce the cost of producing high-consumption winter suit fabrics.

Details

Research Journal of Textile and Apparel, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1560-6074

Keywords

Article
Publication date: 13 April 2023

Meenakshi Ahirwar and Bijoya Kumar Behera

Denim fabric has become a wardrobe staple due to its versatility to be worn in a variety of fashions. This paper aims to study denim fabrics to understand their unique hand by…

64

Abstract

Purpose

Denim fabric has become a wardrobe staple due to its versatility to be worn in a variety of fashions. This paper aims to study denim fabrics to understand their unique hand by developing a hand evaluation system using computational method. Also, the effect of various washes was studied on the hand and surface morphology of denim fabrics.

Design/methodology/approach

Five different denim samples were manufactured with various washing treatments. The Kawabata Evaluation System was used to measure the low stress mechanical properties. Computation method was used to develop hand equations using multiple regression technique in the MS Excel software. The correlation coefficient analysis was done to determine the authenticity of the developed equations. Five primary hand attributes such as softness, smoothness, fullness, flexibility and stretchability were shortlisted by a panel of judges that influence the fabric handle.

Findings

The correlation coefficient between subjective and computational total hand values with thermal properties and without thermal properties was 0.88 and 0.85, respectively. The enzymatic wash fabric has the highest total hand value followed by the acid, bleach and stone-washed fabrics.

Originality/value

Although the hand evaluation system is available for conventional textiles like suiting and shirting fabrics, the method to predict fabric hand of non-conventional textiles such as denim fabrics remains an unexplored topic. The stresses acting on denim fabrics are completely different. Therefore, to the best of the author’s knowledge, a novel attempt has been made in this research work to develop a computational model to predict the total hand value of denim fabrics.

Details

Research Journal of Textile and Apparel, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1560-6074

Keywords

Article
Publication date: 4 January 2022

Kura Alemayehu Beyene, Wassie Mengie and Chirato Godana Korra

The purpose of this study is to investigate the effects of weft yarn diameter and pick density on the properties of surface roughness (SMD) of 3/1 (Z) twill-woven fabrics in three…

Abstract

Purpose

The purpose of this study is to investigate the effects of weft yarn diameter and pick density on the properties of surface roughness (SMD) of 3/1 (Z) twill-woven fabrics in three measurement directions weft (0°), the warp (90°) and the diagonal (45°).

Design/methodology/approach

Nine 3/1 (Z) twill samples were prepared with two factors and three levels and their roughness values were measured in the weft (0°), warp (90°) and diagonal (45°) directions of 3/1 (Z) twill fabrics using the Kawabata-FB4 instrument. Analysis of variance (ANOVA) is used to determine the effect of weft yarn diameter and pick density on SMD properties and comparisons were done in the weft (0°), the warp (90°) and the diagonal (45°) directions.

Findings

From experimental analysis, weft yarn diameter and pick density affect SMD of 3/1 (Z) twill-woven fabrics in both diagonal (45°) and weft (0°) directions but slightly affect warp (90°) direction. Maximum SMD values were observed in diagonal (45°) directions and the minimum was in warp (90°) directions of fabrics. Weft yarn diameter and pick density are statistically significant on SMD values of 3/1 (Z) twill-woven fabrics for three directions at a 95% confidence interval. Parameter variation in weft directions of 3/1 (Z) twill-woven fabrics also varies SMD values in three directions measurements

Originality/value

The findings of this study can be usually used for textile technology, industries and laboratories to create a basic understanding for measuring roughness properties of 3/1 (Z) twill fabric. It is also possible to identify the surface characterizations in different directions of measurement for their usage in some specific areas of end application like consumer goods, home textiles, technical textiles, etc.

Details

Research Journal of Textile and Apparel, vol. 27 no. 2
Type: Research Article
ISSN: 1560-6074

Keywords

Open Access
Article
Publication date: 20 March 2023

Tomoharu Ishikawa, Junki Tsunetou, Yoshiko Yanagida, Mutsumi Yanaka, Minoru Mitsui, Kazuya Sasaki and Miyoshi Ayama

The study aimed to clarify differences in fabric hand perceptions among Japanese and Chinese participants and implement online shopping strategies that enable consumers to easily…

Abstract

Purpose

The study aimed to clarify differences in fabric hand perceptions among Japanese and Chinese participants and implement online shopping strategies that enable consumers to easily recognize fabric texture.

Design/methodology/approach

Forty (20 Japanese and 20 Chinese) participants knowledgeable about clothing and fabric were recruited. Participants evaluated fabric by sight and touch in a visuotactile experiment (VTE). The stimulus material comprised 39 fabric samples representing a broad range of fabric attributes (7 fibers, 5 weaving/knitting techniques and 3 yarn thicknesses and density). A Mann–Whitney U test and a factor analysis were conducted to determine differences in responses for the different fabric variables.

Findings

The fabric hand perceptions factors were similar between both groups. Japanese participants showed a stronger preference for fabrics that felt wet. Japanese participants’ fabric hand perceptions had a 3-factor structure, while Chinese participants had a 2-factor structure. Chinese participants regarded “crisp” as perceptually and linguistically equivalent to “stretchy.”

Originality/value

The study’s findings suggest that Chinese people have stronger preferences in fabrics than Japanese people do. Japanese people evaluate fabric hand in a more nuanced manner than Chinese individuals, including discerning different fabric attributes, such as fiber and yarn thickness and density. Thus, nationality may influence fabric hand perceptions more than fabric knowledge does. Specifically, in evaluating “crispness,” the results required further analysis because differences in nationality may have affected evaluations regarding perception and linguistic perspectives. The findings provide design guidelines for implementing online shopping strategies adapted to each participant group.

Details

International Journal of Clothing Science and Technology, vol. 35 no. 3
Type: Research Article
ISSN: 0955-6222

Keywords

Article
Publication date: 22 February 2022

Kura Alemayehu Beyene

Modeling helps to determine how structural parameters of fabric affect the surface of a fabric and also identify the way they influence fabric properties. Moreover, it helps to…

Abstract

Purpose

Modeling helps to determine how structural parameters of fabric affect the surface of a fabric and also identify the way they influence fabric properties. Moreover, it helps to estimate and evaluate without the complexity and time-consuming experimental procedures. The purpose of this study is to develop and select the best regression model equations for the prediction and evaluation of surface roughness of plain-woven fabrics.

Design/methodology/approach

In this study, a linear and quadratic regression model was developed for the prediction and evaluation of surface roughness of plain-woven fabrics, and the capability in accuracy and reliability of the two-model equation was determined by the root mean square error (RMSE). The Design-Expert AE11 software was used for developing the two model equations and analysis of variance “ANOVA.” The count and density were used for developing linear model equation one “SMD1” as well as for quadratic model equation two “SMD2.”

Findings

From results and findings, the effects of count and density and their interactions on the roughness of plain-woven fabric were found statistically significant for both linear and quadratic models at a confidence interval of 95%. The count has a positive correlation with surface roughness, while density has a negative correlation. The correlations revealed that models were strongly correlated at a confidence interval of 95% with adjusted R² of 0.8483 and R² of 0.9079, respectively. The RMSE values of the quadratic model equation and linear model equation were 0.1596 and 0.0747, respectively.

Originality/value

Thus, the quadratic model equation has better capability accuracy and reliability in predictions and evaluations of surface roughness than a linear model. These models can be used to select a suitable fabric for various end applications, and it was also used for tests and predicts surface roughness of plain-woven fabrics. The regression model helps to reduce the gap between the subjective and objective surface roughness measurement methods.

Details

Research Journal of Textile and Apparel, vol. 27 no. 2
Type: Research Article
ISSN: 1560-6074

Keywords

Article
Publication date: 15 March 2024

Haizhen Wang, Xin Ma, Ge An, Wenming Zhang and Huili Tang

Goal orientation shapes employees’ approach to and interpretation of workplace aspects such as supervisors’ behavior. However, research has not fully examined the effect of goal…

Abstract

Purpose

Goal orientation shapes employees’ approach to and interpretation of workplace aspects such as supervisors’ behavior. However, research has not fully examined the effect of goal orientation as an antecedent of abusive supervision. Drawing from victim precipitation theory, this study aims to fill this research gap by investigating how employees’ goal orientation influences their perception of abusive supervision.

Design/methodology/approach

Two studies were conducted to test the hypotheses. In Study 1, 181 employees in 45 departments participated in the survey, and multilevel confirmatory factor analysis, two-level path model and polynomial regression were used. In Study 2, 108 working adults recruited from a professional online survey platform participated in a two-wave time-lagged survey. Confirmatory factor analysis, hierarchical linear regression and polynomial regression were used.

Findings

This study found that employees’ learning goal orientation was negatively related to their perception of abusive supervision. In contrast, performance-avoidance goal orientation was positively related to their perception of abusive supervision, whereas performance-approach goal orientation was unrelated to this perception. Moreover, employees’ perception of abusive supervision was greater when learning and performance-approach goal orientation alignment occurred at lower rather than higher levels, and when performance-avoidance and performance-approach goal orientation alignment occurred at higher rather than lower levels.

Originality/value

This research identified two novel victim traits as antecedents of abusive supervision – employees’ learning goal orientation and performance-avoidance goal orientation. Furthermore, adopting a multiple goal perspective, the authors examined the combined effects of goal orientation on employees’ perception of abusive supervision.

Details

International Journal of Conflict Management, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1044-4068

Keywords

Open Access
Article
Publication date: 27 September 2022

Hanna Kinowska and Łukasz Jakub Sienkiewicz

Existing literature on algorithmic management practices – defined as autonomous data-driven decision making in people's management by adoption of self-learning algorithms and…

5745

Abstract

Purpose

Existing literature on algorithmic management practices – defined as autonomous data-driven decision making in people's management by adoption of self-learning algorithms and artificial intelligence – suggests complex relationships with employees' well-being in the workplace. While the use of algorithms can have positive impacts on people-related decisions, they may also adversely influence job autonomy, perceived justice and – as a result – workplace well-being. Literature review revealed a significant gap in empirical research on the nature and direction of these relationships. Therefore the purpose of this paper is to analyse how algorithmic management practices directly influence workplace well-being, as well as investigating its relationships with job autonomy and total rewards practices.

Design/methodology/approach

Conceptual model of relationships between algorithmic management practices, job autonomy, total rewards and workplace well-being has been formulated on the basis of literature review. Proposed model has been empirically verified through confirmatory analysis by means of structural equation modelling (SEM CFA) on a sample of 21,869 European organisations, using data collected by Eurofound and Cedefop in 2019, with the focus of investigating the direct and indirect influence of algorithmic management practices on workplace well-being.

Findings

This research confirmed a moderate, direct impact of application of algorithmic management practices on workplace well-being. More importantly the authors found out that this approach has an indirect influence, through negative impact on job autonomy and total rewards practices. The authors observed significant variation in the level of influence depending on the size of the organisation, with the decreasing impacts of algorithmic management on well-being and job autonomy for larger entities.

Originality/value

While the influence of algorithmic management on various workplace practices and effects is now widely discussed, the empirical evidence – especially for traditional work contexts, not only gig economy – is highly limited. The study fills this gap and suggests that algorithmic management – understood as an automated decision-making vehicle – might not always lead to better, well-being focused, people management in organisations. Academic studies and practical applications need to account for possible negative consequences of algorithmic management for the workplace well-being, by better reflecting complex nature of relationships between these variables.

Details

Information Technology & People, vol. 36 no. 8
Type: Research Article
ISSN: 0959-3845

Keywords

Article
Publication date: 26 March 2024

Achuthy Kottangal and Deepika Purohit

This study aims to analyze how conventional Bedouin weaving techniques have changed through the history of Israel, offering knowledge on the craft’s cultural relevance and…

Abstract

Purpose

This study aims to analyze how conventional Bedouin weaving techniques have changed through the history of Israel, offering knowledge on the craft’s cultural relevance and historical development among the Bedouin people and how their weaving and embroidery differ based on the three main geographic characteristics. It tries to comprehend the causes of the transition from organic to synthetic materials and the part played by the Lakiya Negev Bedouin Weaving women’s cooperative in maintaining this legacy.

Design/methodology/approach

The main goal of this study is to trace the emergence of Bedouin weaving traditions in the Negev Desert using a qualitative research methodology that combines historical analysis and ethnographic investigation. A thorough grasp of the subject’s significance is provided through the data gathering, which consists of interviews, archival research and field observations.

Findings

Through the years, Bedouin weaving techniques have significantly shifted away from using traditional organic materials in favor of synthetic replacements, according to the research. It emphasizes the crucial part played by the Lakiya Negev Bedouin Weaving women’s organization in safeguarding this traditional legacy and giving Bedouin women access to economic prospects.

Research limitations/implications

The limitation of the study includes its emphasis on the Negev region and the Israeli Bedouin community, which may not accurately reflect all Bedouin weaving techniques. Greater regional settings may be explored in future studies.

Practical implications

The investigation emphasizes the value of investing in initiatives for cultural preservation and the empowerment of underprivileged groups through economic possibilities.

Social implications

By preserving ancient weaving techniques, this research enables Bedouin women in the Negev Desert to maintain their cultural identity and socioeconomic well-being.

Originality/value

By emphasizing the socio-cultural dimensions and the organization’s role in preserving traditional craftsmanship in a changing socio-economic environment, this research presents a unique investigation of the evolution of Bedouin weaving techniques in Israel.

Details

Journal of Cultural Heritage Management and Sustainable Development, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 2044-1266

Keywords

Article
Publication date: 9 January 2024

Kaizheng Zhang, Jian Di, Jiulong Wang, Xinghu Wang and Haibo Ji

Many existing trajectory optimization algorithms use parameters like maximum velocity or acceleration to formulate constraints. Due to the ignoring of the quadrotor actual…

Abstract

Purpose

Many existing trajectory optimization algorithms use parameters like maximum velocity or acceleration to formulate constraints. Due to the ignoring of the quadrotor actual tracking capability, the generated trajectories may not be suitable for tracking control. The purpose of this paper is to design an online adjustment algorithm to improve the overall quadrotor trajectory tracking performance.

Design/methodology/approach

The authors propose a reference trajectory resampling layer (RTRL) to dynamically adjust the reference signals according to the current tracking status and future tracking risks. First, the authors design a risk-aware tracking monitor that uses the Frenét tracking errors and the curvature and torsion of the reference trajectory to evaluate tracking risks. Then, the authors propose an online adjusting algorithm by using the time scaling method.

Findings

The proposed RTRL is shown to be effective in improving the quadrotor trajectory tracking accuracy by both simulation and experiment results.

Originality/value

Infeasible reference trajectories may cause serious accidents for autonomous quadrotors. The results of this paper can improve the safety of autonomous quadrotor in application.

Details

Robotic Intelligence and Automation, vol. 44 no. 1
Type: Research Article
ISSN: 2754-6969

Keywords

Article
Publication date: 3 January 2023

Nahil Saqfalhait, Khawlah AbdAlla Spetan, Taleb Awad-Warrad and Mohammad W. Alomari

This paper investigates the impact of trade liberalization measured by trade openness (OPN) and tariffs on women empowerment measured by the gender gap index and gender…

Abstract

Purpose

This paper investigates the impact of trade liberalization measured by trade openness (OPN) and tariffs on women empowerment measured by the gender gap index and gender development index, for two groups of Arab countries divided based on their income levels using annual data for the period 1995–2020. The study also considers other factors that may influence the gender gap, such as GDP growth and the female unemployment rate. The purpose of this paper is to address these issues and explorers whether the effects of trade liberalization differ based on the countries' income levels.

Design/methodology/approach

This study employs the fully modified ordinary least squares (FM-OLS) regression model for heterogeneous cointegrated panels to examine the impact of trade liberalization on women empowerment. The study constructs an empirical two regression model of women empowerment measured by the gender gap model and gender development model for the two groups of higher-income countries and lower and middle-income countries.

Findings

The authors’ findings reveal that the impact of OPN on the gender gap varies between the two groups of Arab countries where more OPN within the higher-income group may increase the gender disparity, while it may reduce disparity within the lower and middle-income countries. In addition, GDP growth may reduce the gender disparity, while female unemployment raises the gender disparity between the two groups of countries in the long run. Findings also reveal that more OPN, tariffs and female unemployment may reduce gender development within the two groups, but more GDP growth may support the gender development in the long run.

Originality/value

This paper not only assesses the impact of trade liberalization on women empowerment generally, but also assess the women empowerment via two indices that are the gender gap and gender development in Arab countries which is – to the knowledge of the researchers – not yet investigated; further it explores if the effects of trade liberalization differs based on the countries' income levels.

Details

International Journal of Gender and Entrepreneurship, vol. 15 no. 3
Type: Research Article
ISSN: 1756-6266

Keywords

1 – 10 of 23