Search results

This paper has two aims: to investigate the relationship of self‐efficacy beliefs in terms of research on publication output; and, to identify the relationship of self‐efficacy beliefs about research to the publishing outputs of neophyte lecturers.

A questionnaire was utilised to obtain responses from lecturers working full‐time at two large Australian universities (n=343). The data from this sample were analysed using factor analysis, correlation, and multiple regression analysis. Data from two sub‐samples of neophyte lecturer (n₁=47; n₂=78) were then subjected to a multivariate analysis of variance.

Four research self‐efficacy subscales were derived from a factor analysis. These subscales were positively and significantly related and accounted for 46 percent of the total variance in total publications accrued. Significant differences were found between two groups of neophyte lecturer on nearly all items forming the respective research self‐efficacy subscales. And, group membership accounted for 45.4 percent of the total variance.

The findings have implications both theoretically and practically. Theoretically, the research self‐efficacy construct was shown to have four underlying dimensions and to be highly predictive of a measure of publication output. From a practical perspective, the items forming the research self‐efficacy subscales could be a useful tool to promote discussion about the tasks a lecturer may need to perform during an academic career. Further, the items could be ranked in terms of their discriminative capacity and, as a result, be used as the basis for researcher development and interventions to promote improved research self‐efficacy and therefore increased publication output.

There has been little research about incident management decision making within real-life, dynamic emergencies such as urban fire settings. So this research addresses the research problem: how do incident managers make decisions in urban fire settings? These decision behaviours cover five areas: assessment of the fireground situation, selection of a decision strategy, determination of incident objectives, deployment and management of firefighting resources and ongoing review of the incident. The paper aims to discuss these issues.

Case research was used to examine management of different types of fires, through in-depth interviews with a range of incident managers.

This research identified five key behavioural elements associated with incident management in urban fire settings such as their application of a mix of recognition-primed, value based, procedural and formal decision strategies throughout the course of an incident rather than a single style.

The in-depth framework of decision making could provide foundations for later research about other emergency settings. And this research is limited to analytic generalisation (Yin, 2009); so quantitative research such as surveys and large scale interviews could be done to further extend the research for statistical generalisation.

The decision procedures uncovered in this research will assist incident managers in many emergencies, assist policy making and foster the development of future incident managers.

The findings expand the knowledge of how incident managers develop situation awareness, make decisions and plans, implement them, and review the incident as it evolves. Another contribution is the comprehensive framework of decision making developed from these findings.

This list of 41 “Stupid Things that Libraries Do” was largely culled from public library practitioners’ postings on the PUBLIB electronic discussion list. Libraries must take action to ensure that their operations, and particularly their public services, are unhampered by these common bad practices. By identifying possible failings in advance, librarians can better place themselves to meet the expectations of their users, and provide the professional service expected of them.

Building on relational inequality theory, this paper incorporates social capital as a device to trace the flow of resources through relationships originating within and beyond organizations. I draw on a survey of over 1,700 lawyers to evaluate key dynamics of social capital that shape earnings: bridging and bonding, reciprocity exchanges and sponsorship, and boundary maintenance. The findings show social capital lends a lift to law graduates through bridges to professional careers and sponsorship following job entry. Racial minorities, however, suffer a shortfall of personal networks to facilitate job searches, and once having secured jobs, minorities experience social closure practices by clients and colleagues that disadvantage them in their professional work. A sizeable earnings gap remains between racial minority and white lawyers after controlling for human and social capitals, social closure practices, and organizational context. This earnings gap is particularly large among racial minorities with more years of experience and those working in large law firms. The findings demonstrate the importance of identifying the interrelations that connect social network and organizational context to impact social inequality.

The prevalence of psychiatric disorders in children and young people is increasing, leading to recommendations that medical schools re-consider their curriculum content and teaching practices for child and adolescent psychiatry (CAP). The purpose of this paper is to seek guidance for undergraduate curriculum development from the wider literature on CAP curriculum content and teaching practices.

A comprehensive search of the literature was conducted, focussing on studies that examined undergraduate teaching of CAP. In an attempt to establish whether there is an agreed level of curriculum content and teaching practices, literature from all over the world was included.

Findings suggest that curriculum content and teaching practices are varied, therefore it was difficult to identify best practice upon which recommendations can be made. In addition, despite previous calls for curriculum improvements and expansion of learning objectives, recent studies suggest that there has been little change.

A common theme emerging was the importance of making the CAP curriculum relevant to all future doctors rather than only those who plan to specialise in CAP. Further research to determine what CAP knowledge, skills and attitudes non-psychiatrists think that medical students need to be taught is warranted.

This paper reviewed the literature on undergraduate CAP teaching, highlighting common themes from the wider literature on medical curriculum development to inform how CAP curricula content can be developed to equip future doctors.

The purpose of this paper is to develop a hybrid additive/subtractive manufacturing platform for the production of high density ceramic components.

Fabrication of near-net shape components is achieved using 96 per cent Al3O2 ceramic paste extrusion and a planarizing machining operations. Sacrificial polymer support can be used to aid the creation of overhanging or internal features. Post-processing using a variety of machining operations improves tolerances and fidelity between the component and CAD model while reducing defects.

This resultant three-dimensional monolithic ceramic components demonstrated post sintering tolerances of ±100 µm, surface roughness’s of ∼1 µm Ra, densities in excess of 99.7 per cent and three-point bending strength of 221 MPa.

This method represents a novel approach for the digital fabrication of ceramic components, which provides improved manufacturing tolerances, part quality and capability over existing additive manufacturing approaches.

This paper aims to demonstrate the improved functionality of additive manufacturing technology provided by combining multiple processes for the fabrication of packaged electronics.

This research is focused on the improvement in resolution of conductor deposition methods through experimentation with build parameters. Material dispensing with two different low temperature curing isotropic conductive adhesive materials was characterised for their application in printing each of three different conductor designs, traces, z-axis connections and fine pitch flip chip interconnects. Once optimised, demonstrator size can be minimised within the limitations of the chosen processes and materials.

The proposed method of printing z-axis through layer connections was successful with pillars 2 mm in height and 550 µm in width produced. Dispensing characterisation also resulted in tracks 134 µm in width and 38 µm in height allowing surface mount assembly of 0603 components and thin-shrink small outline packaged integrated circuits. Small 149-µm flip chip interconnects deposited at a 457-µm pitch have also been used for packaging silicon bare die.

This paper presents an improved multifunctional additive manufacturing method to produce fully packaged multilayer electronic systems. It discusses the development of new 3D printed, through layer z-axis connections and the use of a single electrically conductive adhesive material to produce all conductors. This facilitates the surface mount assembly of components directly onto these conductors before stereolithography is used to fully package multiple layers of circuitry in a photopolymer.

This paper aims to explore the potential of ultrasonic additive manufacturing (UAM) to incorporate the direct printing of electrical materials and arrangements (conductors and insulators) at the interlaminar interface of parts during manufacture to allow the integration of functional and optimal electrical circuitries inside dense metallic objects without detrimental effect on the overall mechanical integrity. This holds promise to release transformative device functionality and applications of smart metallic devices and products.

To ensure the proper electrical insulation between the printed conductors and metal matrices, an insulation layer with sufficient thickness is required to accommodate the rough interlaminar surface which is inherent to the UAM process. This in turn increases the total thickness of printed circuitries and thereby adversely affects the integrity of the UAM part. A specific solution is proposed to optimise the rough interlaminar surface through deforming the UAM substrates via sonotrode rolling or UAM processing.

The surface roughness (Sa) could be reduced from 4.5 to 4.1 µm by sonotrode rolling and from 4.5 to 0.8 µm by ultrasonic deformation. Peel testing demonstrated that sonotrode-rolled substrates could maintain their mechanical strength, while the performance of UAM-deformed substrates degraded under same welding conditions ( approximately 12 per cent reduction compared with undeformed substrates). This was attributed to the work hardening of deformation process which was identified via dual-beam focussed ion beam–scanning electron microscope investigation.

The sonotrode rolling was identified as a viable methodology in allowing printed electrical circuitries in UAM. It enabled a decrease in the thickness of printed electrical circuitries by ca. 25 per cent.

The study aims to investigate the impact of additive manufacturing (AM) on the performance of a spare parts supply chain with a particular focus on underlying spare part demand patterns.

This work evaluates various AM-enabled supply chain configurations through Monte Carlo simulation. Historical demand simulation and intermittent demand forecasting are used in conjunction with a mixed integer linear program to determine optimal network nodal inventory policies. By varying demand characteristics and AM capacity this work assesses how to best employ AM capability within the network.

This research assesses the preferred AM-enabled supply chain configuration for varying levels of intermittent demand patterns and AM production capacity. The research shows that variation in demand patterns alone directly affects the preferred network configuration. The relationship between the demand volume and relative AM production capacity affects the regions of superior network configuration performance.

This research makes several simplifying assumptions regarding AM technical capabilities. AM production time is assumed to be deterministic and does not consider build failure probability, build chamber capacity, part size, part complexity and post-processing requirements.

This research is the first study to link realistic spare part demand characterization to AM supply chain design using quantitative modeling.