Search results

This paper aims to find out the tribological performance and self-lubricating mechanism of the laser-textured surface filled with solid lubricant in rolling friction pair.

The textures on the surfaces of GCr15 bearing steel were produced by acousto-optic Q diode-pumped yttrium aluminum garnet laser with the technology of “single pulse one time, repeating at intervals” and filled with composite solid lubricant. The tribology tests were conducted on the MMW-1A universal friction and wear testing machine.

It was found that the solid-lubricated micro-textured surface can reduce the friction coefficient effectively. The MoS2/PI composite solid lubricant works better than the single MoS2 solid lubricant, and the ratio of PI/MoS2 + PI at 20 per cent is the best recipe. The friction coefficient of the sample surfaces decreases first and then increases with the increase in texture densities, and a texture density of 19.6 per cent has the best effect on friction reduction. The friction coefficient of the textured surfaces gradually decreases with the increase in both rational speed and load. For the same texture density, the friction coefficient of textured surfaces decreases slightly with the increase in diameter. Furthermore, the mechanism of “rolling-extrusion-accumulation” occurred on the textured surface can collect the solid lubricant, thereby, improve the effect of lubricating and anti-friction.

The results of the experimental studies demonstrated the application prospect of laser surfaces texturing combined with solid lubricant in rolling friction pair.

The purpose of this paper is to investigate the influence of fluor‐oligomeric coat on the mechanical properties of steel surface, as well as the chemical interaction of fluor‐oligomeric films with surface and theoretical‐phenomenological interpretation of structural processes in friction surface.

Four groups of specimens were studied: two groups of specimens without any wear tests – initial steel specimen as control version and a specimen which was ten times coated by fluor‐oligomer, and two groups of specimens, which were tribologically tested for one million cycles – without any coating and coated specimens. Closed kinematical profile scheme roller‐roller of steel 45 was chosen for tribological tests. Wear of friction surface after those tests was investigated. The interaction between fluor‐oligomer and iron was studied by means of Mössbauer spectroscopy. The micro‐hardness of matrix was also measured.

Affecting the surface of steel by the fluor‐oligomer and friction produces the complicated processes of carbide decay and formation occur. The mechanisms are found which are related to the weakening of chemical bond in steel during the absorption, to the generation of microscopic ruptures, to the decrease (30‐50 per cent) of the amount of carbides and its increase during the friction (up to 50 per cent). The mechanical effect which causes the regeneration of carbides during friction is revealed. Tribological efficiency of fluor‐oligomeric coats (five times lower wear of coated specimens) is explained by the balance of three processes – the softening of matrix during adsorption, the detention of dislocations, and formation of hard particles in the matrix.

The complex mechanism of the increase of wear resistance is explained by filling of ductile matrix with carbide particles.

The purpose of this paper is to study the influence of dimple textures on the friction and wear properties of tapered roller bearings (TRBs) with many pattern parameters, e.g. diameter, depth and area density under starved lubrication.

The pattern parameters include the dimple diameter (D; 60, 100 and 200 µm), dimple depth (H; 5, 10 and 20 µm) and area density (S; 6%, 12% and 24%). Dimples were fabricated on the outer ring (OR) of TRBs using a laser marking machine. The tribological properties of dimple-textured TRBs under starved lubrication were studied on a vertical universal friction wear tester with special friction pairs. The effect mechanisms of dimple textures on the tribological properties of TRBs are presented and summarized through experiments and discussions.

When dimple-textured TRBs revolve under starved lubrication, the average coefficients of friction (ACOF) and wear losses are markedly lower than those of non-textured bearings. S has the greatest influence on the COF curve. When D is 100 µm and S is 24%, the ACOF and wear losses are both lowest, i.e. 0.00426 and 0.51 mg, respectively. Under the same test conditions, compared with the non-textured group, its COF and wear loss decreased by 35.6% and 62.5%, respectively.

This work provides a useful reference for the research on the raceways of textured TRBs.

This paper aims to improve the tribological properties of lithium complex greases using nanoparticles to investigate the tribological behavior of single additives (nano-TiO₂ or nano-CeO₂) and composite additives (nano-TiO₂–CeO₂) in lithium complex greases and to analyze the mechanism of their influence using a variety of characterization tools.

The morphology and microstructure of the nanoparticles were characterized by scanning electron microscopy and an X-ray diffractometer. The tribological properties of different nanoparticles, as well as compounded nanoparticles as greases, were evaluated. Average friction coefficients and wear diameters were analyzed. Scanning electron microscopy and three-dimensional topography were used to analyze the surface topography of worn steel balls. The elements present on the worn steel balls’ surface were analyzed using energy-dispersive spectroscopy and X-ray photoelectron spectroscopy.

The results showed that the coefficient of friction (COF) of grease with all three nanoparticles added was low. The grease-containing composite nanoparticles exhibited a lower COF and superior anti-wear properties. The sample displayed its optimal tribological performance when the ratio of TiO₂ to CeO₂ was 6:4, resulting in a 30.5% reduction in the COF and a 29.2% decrease in wear spot diameter compared to the original grease. Additionally, the roughness of the worn spot surface and the maximum depth of the wear mark were significantly reduced.

The main innovation of this study is the first mixing of nano-TiO₂ and nano-CeO₂ with different sizes and properties as compound lithium grease additives to significantly enhance the anti-wear and friction reduction properties of this grease. The results of friction experiments with a single additive are used as a basis to explore the synergistic lubrication mechanism of the compounded nanoparticles. This innovative approach provides a new reference and direction for future research and development of grease additives.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-09-2023-0291/

It was verified that the micro-texture in the front and back of the tool at the same time had a positive effect on improving the milling behavior and surface quality of the tool. The purpose of this study is to explore the rationality of simultaneous placement of micro-textures on the front and rear surfaces of ball-end milling cutters, analyze the influence of micro-texture parameters on tool milling behavior and workpiece surface quality, reveal its internal mechanism, and obtain the best micro-texture parameters by optimization.

First, the mechanism of micro-texture is studied based on the energy loss model. Second, the orthogonal experiment is designed to analyze the influence of micro-texture parameters on tool milling behavior and reveal its mechanism by combining simulation technology and cutting experiment. Finally, the parameters are optimized based on the artificial bee colony algorithm.

The results show that the simultaneous placement of micro-texture on the rake face and flank face of the tool has a positive effect on improving the milling behavior and surface quality of the tool. Taking milling force, tool wear and surface roughness as the evaluation criteria, the optimal parameter combination is obtained: the rake face micro-texture diameter is 50 µm, the distance from the micro-texture is 200 µm and the distance from the cutting edge is 110 µm; the diameter of the micro-textured flank is 40 µm, the distance from the micro-texture is 170 µm and the distance from the cutting edge is 130 µm.

Taking milling force, tool wear and surface roughness as the evaluation criteria, the optimal parameter combination is obtained: the rake face micro-texture diameter is 50 µm, the distance from the micro-texture is 200 µm and the distance from the cutting edge is 110 µm; the diameter of the micro-textured flank is 40 µm, the distance from the micro-texture is 170 µm and the distance from the cutting edge is 130 µm, which provides theoretical support for the further study of the micro-textured tool.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-01-2023-0022/

Babbitt bush is easy to cause severe adhesive wear due to unexpected journal fall. This paper aims to improve wear resistance of Babbitt bush.

A soft/hard hybrid surface mircoprofile of Babbitt alloy/steel was fabricated by a technology of laser texture combined with hot-pressing. The friction and wear performances of bare steel (steel-h), Babbitt bush on steel (steel-s) and Babbitt filled in dimples of steel (steel-hs) were conducted on a ball-on-disc tester under dry and lubricated conditions.

The results showed that wettability of steel-hs was enhanced by forming soft/hard hybrid surface. Compared with steel-s, the stability of friction coefficient curve of steel-hs was improved without increasing coefficient friction. The wear resistance of steel-hs was remarkably enhanced under dry and lubricated conditions.

The originality of this paper is as following: to improve the tribological properties and to prolong service life of steel-s, soft/hard hybrid surface of Babbitt filled in dimples of steel substrate was successfully fabricated by laser texturing combined with hot-pressing. This paper showed that the lipophilicity of steel-hs was best among those of steel-s and steel-h. Babbitt alloy as a soft filler on dimples of steel substrate improved anti-wear of steel-s remarkably. It provides a new way to fabricate Babbitt as bushing on steel substrate.

The purpose of this study is to investigate the tribological performance of helical gear pairs with consideration of the properties of non-Newtonian lubricant and the real three-dimensional (3D) topography of tooth flanks.

Based on the mixed elastohydrodynamic lubrication (EHL) theory for infinite line contact, this paper proposes a complete model for involute helical gear pairs considering the real 3D topography of tooth flanks and the properties of non-Newtonian lubricant. Film thickness, contact load and contact area ratios at the mid-point of contact line are studied for each angular displacement of pinion. Both the total friction coefficient and surface flash temperature are calculated after obtaining the values of pressure and subsurface stress. Then, the influences of input parameters including rotational speed and power are investigated.

During the meshing process, contact load ratio and area ratio of the two rough surface cases first increase and then decrease; the maximum flash temperature rise (MFTR) on the gear is lower than that on the pinion first, but later the situation converses. For cylindrical gears, on the plane of action, there is a point or a line where the instantaneous friction reduces to a minimum value in a sudden, as the sliding–rolling ratio becomes zero. When rotational speed increases, film thickness becomes larger, and meanwhile, contact load ratio, coefficient of friction and MFTR gradually reduce.

A comprehensive analysis is conducted and a computer program is developed for meshing geometry, kinematics, tooth contact, mixed EHL characteristics, friction, FTR and subsurface stress of involute helical gear pairs. Besides, a numerical simulation model is developed, which can be used to analyze mixed lubrication with 3D machined roughness under a wide range of operating conditions.

This study aims to produce lubricating surfaces with micro-channels by the selective laser melting (SLM) method, and to investigate their tribological behavior.

In this study, three kinds of samples with different geometries were designed, impregnated with oil and then subjected to flow analysis in a virtual environment using Ansys Fluent software. According to the results of these analyses, the best-lubricated surface geometry sample was identified, and a number of geometries were produced by SLM, which is one of the additive manufacturing methods. Tribological tests were performed using a pin-on-disk tribometer with a stainless steel ball as the contact surface. The structural and morphological features were investigated by a three-dimensional profilometer and scanning electron microscopy.

The results obtained showed that the impregnated oil reached the surface of the sample compared to untreated samples, and it was seen that the wear rates were reduced, and that the impregnated oil samples exhibited the highest wear resistance.

In this study, solid geometries that are difficult to be produced by other methods are produced with additive manufacturing method, and the surfaces have been given lubricating properties.

The main purpose of this paper is to present the effort on developing a mixed elastohydrodynamic lubrication (EHL) model to study the tribological effect of asperities on rough surface.

The model, with the use of the average flow Reynolds equation and the K-E elasto-plastic contact model, allows predictions of hydrodynamic pressure and contact pressure on the virtual rough surface, respectively. Then, the substrate elastic deformation is calculated by discrete convolution fast-Fourier transform (DC-FFT) method to modify the film thickness recursively. Afterwards, corresponding ball-on-disk tests are conducted and the validity of the model demonstrated. Moreover, the effects of asperity features, such as roughness, curvature radius and asperity pattern factor, on the tribological properties of EHL, are also discussed though plotting corresponding Stribeck curves and film thickness shapes.

It is demonstrated that the current model predicts very close data compared with corresponding experimental results. And it has the advantage of high accuracy comparing with other typical models. Furthermore, smaller roughness, bigger asperity radius and transverse rough surface pattern are found to have lower friction coefficients in mixed EHL models.

This paper contributes toward developing a mixed EHL model to investigate the effect of surface roughness, which may be helpful to better understand partial EHL.

CONTINUAL pressure of competition from the aircraft and automobile industries is forcing the administrators of railways throughout the world to concentrate their efforts on possibilities of modernization and improvement, with particular emphasis on the increase in travelling speeds. It is, therefore, necessary to pay special attention to the system railway wheel/rail, as it is this which has to fulfil such important functions as transmitting the driving, braking and guiding forces, quite apart from supporting the vehicle itself.