Search results

A new electrochemical analysis based on ß-cyclodextrin (ß-CD) was developed for penicillin V (Peni-V) using polyaniline as a conducting polymer.

The preparation of modified electrode involves the incorporation of β-CD with membrane of polyaniline. Polyaniline, incorporating β-CD, was prepared by electrochemical polymerization method in a medium of hypochloride. Cyclic voltammetry and electrochemical impedance have been used to characterize this sensor. The detection and the kinetic study of modified platinum electrode are evaluated.

Results clearly indicate that β-CDs interfere with the polymerization mechanism with an inhibition factor. The inclusion phenomenon of β-CDs has been studied and applied to detect Peni-V. The principle of this electrochemical sensor is based on the chemical properties of β-CD, which were studied using the cyclic voltammetric method and impedance spectroscopy. The electrochemical behavior of Peni-V at concentrations between 10^–8 and 10^–2 M was measured versus Ag/AgCl at pH 7.4 and 30°C in a phosphate alkaline buffer. Relationship of Peni-V concentration in logarithmic mathematical form with current in potentiometric method and with resistance in impedimetric method were obtained.

The present study showed that the Pt electrode modified with Polyaniline–β-CD was an excellent candidate for sensitive penicillin analysis. The proposed electroanalytical technique is rapid, simple and inexpensive.

The purpose of this paper is to study the immobilization of porcine pancreatic lipase (PPL), in an organic matrix by a covalent cross-linking method to sense propylparaben (PP) present in aqueous solution.

PPL immobilization was performed by the covalent cross-linking method, using bovine serum albumin (BSA) in the presence of saturated glutaraldehyde vapor (GA). The preparation of the enzymatic membrane involves the incorporation of porcine pancreatic lipase (PPL), bovine serum albumin (BSA) and glycerol into a phosphate buffer solution (PBS). Characterization of this sensor was performed by impedance spectroscopy (EIS) and scanning electron microscope (SEM). The effect of experimental conditions such as PPL activity, potential, scan rate, PP concentration, pH and presence of interfering elements were studied by cyclic voltammetry.

Under the optimal experimental conditions, a number of significant factors were optimized. The method exhibited good linearity in the range of 10^–14 to 10^–9 mol/L with a good correlation coefficient of 0.957, detection limit (LOD) of 3.66 × 10^–15 mol/L and high sensitivity of 1.086 mA mol⁻¹L. The authors also obtained a very good coverage rate of the surface equal to 91.44%, and hydrolytic activity of lipase is evaluated to 26.64 mmol min⁻¹. The stability and the interference were also evaluated. The equivalent circuit used to explain the electrochemical behavior of modified electrode is a Randle circuit.

The main application of biosensors is the detection of biomolecules that are either indicators of a disease. For example, electrochemical biosensing techniques can be used as clinical tools to detect breast tumors, because these compounds (PP) were found in breast tumors.

The result registered in this paper indicates that the developed sensor is an efficient, fast, simple and inexpensive analytical tool that can be used for the analysis of water containing PP.

The purpose of this work is to explore electrical properties of an electrochemical sensor designed for the detection of malachite green (MG) present in an aqueous solution.

The present sensor consists in the spatial coupling of a polymeric membrane and an ion-sensitive electrode (platinum electrode). The preparation of the polymeric membrane involves the incorporation of an ionophore (D2HPA), a polymer (polyvinylchloride [PVC]) and a plasticizer (dioctyl phthalate [DOP]). Several techniques have been used to characterize this sensor: the cyclic voltammetry, the electrochemical impedance spectroscopy and the optical microscopy. The sensibility, the selectivity and the kinetic study of a modified platinum electrode have been evaluated by cyclic voltammetry.

The obtained results reveal the possibility of a linear relationship between the current of reduction peaks and MG concentration. A linear response was obtained in a wide-concentration range that stretches from 10⁻⁵ to 10⁻¹³ mol L⁻¹, with a good correlation coefficient (0.976) and a good detection limit of 5.74 × 10⁻¹⁴ mol L⁻¹ (a signal-to-noise ratio of 3). In addition, the voltammetric response of modified electrode can be enhanced by adding a layer of Nafion membrane. Under this optimal condition, a linear relationship was obtained, with a correlation coefficient of 0.986 and a detection limit of 1.92 × 10⁻¹⁸ mol L⁻¹.

In the present research, a convenient, inexpensive and reproducible method for the detection of MG was developed. The developed sensor is capable of competing against the conventional techniques in terms of speed, stability and economy.

This paper aims to focus on the development and characterization of a new electrochemical sensor, designed for the detection of methylene blue present in aqueous medium.

This sensor is obtained through the coupling of a polymeric membrane and an ion-sensitive electrode (platinum electrode). The preparation of the polymeric membrane involves the incorporation of a receptor: β-cyclodextrin (β-CD), a polymer (polyvinylchloride) and a plasticizer (dioctylphtalate). Cyclic voltammetry method (CV) was used to investigate the electrical properties of this electrochemical sensor. The effect of the experimental parameters such as dye initial concentration, scan rate, interfering elements presence and additional Nafion membrane presence was investigated in this paper.

The results are interesting because the developed sensor gives a linear response in concentrations range of 10⁻¹³ M–10⁻³ M with a good correlation coefficient of 0.979 and a detection limit of 10⁻¹³ M, which reflects the sensitivity of this sensor to the target element. The sensibility value is equal to 2. 40 µA mol⁻¹ L.

The present study has shown that the modified electrode is a very good candidate in terms of price, sensibility and reproducibility for the construction of the sensitive sensor for the control of wastewater containing methylene blue.