Search results

The paper aims to promote the development of intelligent materials and the 4D printing technology by introducing recent advances and applications of additive layered manufacturing (ALM) technology of intelligent materials and the development of the 4D printing technology. Also, an arm-type ALM technology of shape memory polymer (SMP) with thermosetting polyurethane is briefly introduced.

This paper begins with an overview of the development and applications of intelligent materials around the world and the 4D printing technology. Then, the authors provide a brief outline of their research on arm-type ALM technology of SMP with thermosetting polyurethane.

The paper provides the recent developments and applications of intelligent materials and 4D printing technology. Then, it is suggested that intelligent materials mixed with different functional materials will be developed, and these types of materials will be more suitable for 4D printing.

This paper overviews the current developments and applications of intelligent materials and its use in 4D printing technology, and briefly states the authors’ research on arm-type ALM technology of SMP with thermosetting polyurethane.

Currently on additive manufacturing, extensive research is directed toward mitigating the main challenges associated with multi-material in fused filament fabrication which has a weak bonding strength between dissimilar materials. Low interfacial bonding strength leads to defects, anisotropy and temperature gradient in materials which negatively impact the mechanical performance of the multi-material prints. The purpose of this study was to assess the performance of different interface geometry designs in terms of the mechanical properties of the specimens.

Tensile test specimens were printed using: mono-material without a boundary interface, mono-material with the interface geometries (Face-to-face; U-shape; T-shape; Dovetail; Encapsulation; Mechanical interlocking; and Overlap) and multi-material with the interface geometries. The materials chosen with high and low compatibility were Tough polylactic acid (PLA) and TPU.

The main results of this study indicate that the interface geometries with the mechanical constriction between materials provide better structural integrity to the specimens. Moreover, in the case of the mono-material parts, the most effective interface design was the mechanical interlocking for both Tough PLA and TPU. On the other hand, in the case of multi-material specimens, the encapsulation showed the highest ultimate tensile strength, whereas the overlap and T-shape presented more robust bonding.

This study examines the mechanical performance, particularly tensile strength, strain at break, Young’s modulus and yield strength of different interface designs which were not studied in the previous studies.

Unconventional machining processes, particularly ultrasonic vibration cutting (UVC), can overcome such technical bottlenecks. However, the precise mechanism through which UVC affects the in-service functional performance of advanced aerospace materials remains obscure. This limits their industrial application and requires a deeper understanding.

The surface integrity and in-service functional performance of advanced aerospace materials are important guarantees for safety and stability in the aerospace industry. For advanced aerospace materials, which are difficult-to-machine, conventional machining processes cannot meet the requirements of high in-service functional performance owing to rapid tool wear, low processing efficiency and high cutting forces and temperatures in the cutting area during machining.

To address this literature gap, this study is focused on the quantitative evaluation of the in-service functional performance (fatigue performance, wear resistance and corrosion resistance) of advanced aerospace materials. First, the characteristics and usage background of advanced aerospace materials are elaborated in detail. Second, the improved effect of UVC on in-service functional performance is summarized. We have also explored the unique advantages of UVC during the processing of advanced aerospace materials. Finally, in response to some of the limitations of UVC, future development directions are proposed, including improvements in ultrasound systems, upgrades in ultrasound processing objects and theoretical breakthroughs in in-service functional performance.

This study provides insights into the optimization of machining processes to improve the in-service functional performance of advanced aviation materials, particularly the use of UVC and its unique process advantages.

As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous expansion of the application of AM materials, subtractive processing has become one of the necessary steps to improve the accuracy and performance of parts. In this paper, the processing process of AM materials is discussed in depth, and the surface integrity problem caused by it is discussed.

Firstly, we listed and analyzed the characterization parameters of metal surface integrity and its influence on the performance of parts and then introduced the application of integrated processing of metal adding and subtracting materials and the influence of different processing forms on the surface integrity of parts. The surface of the trial-cut material is detected and analyzed, and the surface of the integrated processing of adding and subtracting materials is compared with that of the pure processing of reducing materials, so that the corresponding conclusions are obtained.

In this process, we also found some surface integrity problems, such as knife marks, residual stress and thermal effects. These problems may have a potential negative impact on the performance of the final parts. In processing, we can try to use other integrated processing technologies of adding and subtracting materials, try to combine various integrated processing technologies of adding and subtracting materials, or consider exploring more efficient AM technology to improve processing efficiency. We can also consider adopting production process optimization measures to reduce the processing cost of adding and subtracting materials.

With the gradual improvement of the requirements for the surface quality of parts in the production process and the in-depth implementation of sustainable manufacturing, the demand for integrated processing of metal addition and subtraction materials is likely to continue to grow in the future. By deeply understanding and studying the problems of material reduction and surface integrity of AM materials, we can better meet the challenges in the manufacturing process and improve the quality and performance of parts. This research is very important for promoting the development of manufacturing technology and achieving success in practical application.

Three-dimensional printing (3DP) is an established process to print structural parts of metals, ceramic and polymers. Further, multi-material 3DP has the potentials to be a milestone in rapid manufacturing (RM), customized design and structural applications. Being compatible as functionally graded materials in a single structural form, multi-material-based 3D printed parts can be applied in structural applications to get the benefit of modified properties.

The fused deposition modelling (FDM) is one of the established low cost 3DP techniques which can be used for printing functional/ non-functional prototypes in civil engineering applications.

The present study is focused on multi-material printing of primary recycled acrylonitrile butadiene styrene (ABS), polylactic acid (PLA) and high impact polystyrene (HIPS) in composite form. Thermal (glass transition temperature and heat capacity) and mechanical properties (break load, break strength, break elongation, percentage elongation at break and Young’s modulus) have been analysed to observe the behaviour of multi-material composites prepared by 3DP. This study also highlights the process parameters optimization of FDM supported with photomicrographs.

The present study is focused on multi-material printing of primary recycled ABS, PLA and HIPS in composite form.

Vision, audition, olfactory, tactile and taste are five important senses that human uses to interact with the real world. As facing more and more complex environments, a sensing system is essential for intelligent robots with various types of sensors. To mimic human-like abilities, sensors similar to human perception capabilities are indispensable. However, most research only concentrated on analyzing literature on single-modal sensors and their robotics application.

This study presents a systematic review of five bioinspired senses, especially considering a brief introduction of multimodal sensing applications and predicting current trends and future directions of this field, which may have continuous enlightenments.

This review shows that bioinspired sensors can enable robots to better understand the environment, and multiple sensor combinations can support the robot’s ability to behave intelligently.

The review starts with a brief survey of the biological sensing mechanisms of the five senses, which are followed by their bioinspired electronic counterparts. Their applications in the robots are then reviewed as another emphasis, covering the main application scopes of localization and navigation, objection identification, dexterous manipulation, compliant interaction and so on. Finally, the trends, difficulties and challenges of this research were discussed to help guide future research on intelligent robot sensors.

This chapter reflects on the understanding of the phenomenon known as Smart Industry, Industry 4.0, fourth industrial revolution, and many other labels. It does so by reflecting on the issue of terminology, as well as the existing diversity regarding the description of the phenomenon. The issue of meaning is addressed by assessing the results from Culot, Nassimbeni, Orzes, and Sartor (2020) and Habraken and Bondarouk (2019) which are, subsequently, used to develop a workable description. Findings from the two assessed studies raise the question of whether a workable construction of the phenomenon is to be understood as the key technologies or the distinctive developments? A question without a definitive answer, but I will present my view by taking inspiration from the manner in which the prior industrial revolutions are commonly understood. This leads to a, still multifaceted though, more focused understanding of the phenomenon. The insights, formulated proposition and developed model stemming from the reflection of terminology and meaning of the phenomenon helps move the current technology-related phenomenon forward. They assist with the establishment of well-documented papers. A critical aspect if we aim to understand how management will look like in the era of this phenomenon.

While it is known that digital transformation facilitates data flow in supply chains, its importance on green supply chain management (GSCM) has not been investigated concisely. This paper aims to expand the theory of digital transformation in GSCM by investigating the interconnections between these concepts and providing an integrative view of a smart green supply chain management (Smart GSCM).

This adopts a configurational perspective on digital transformation and supply chain management (SCM) to investigate the different dimensions of Smart GSCM and their contribution to green performance. Therefore, this paper analyzes data from 473 manufacturing companies using regression techniques.

The results show how smart supply chain contributes to green performance through managing green relationships (external GSCM activities) and establishing green operations (internal GSCM activities). Furthermore, this paper finds partial mediating effects for external and internal GSCM activities on green performance. These findings show that smart supply chain (i.e. digital transformation strategy and front-end technologies, supported by several back-end technologies) is directly associated with higher levels of GSCM. It is specifically associated with one of the internal dimensions of green operations, namely, green purchasing activities. Hence, the findings suggest that digital transformation alone is insufficient to achieve green performance, needing a GSCM configuration to mediate this effect.

This study calls attention to how managers should integrate these at least three different perspectives of SCM: digital transformation, external relationships and internal operations to increase green performance.

As the main contribution, this study provides a configurational and holistic understanding of the different dimensions and mechanisms in Smart GSCM.

This paper aims to address which resources provided by an entrepreneurial ecosystem (EE) are necessary for deep technology entrepreneurship.

The authors used a novel approach known as necessary condition analysis (NCA) to data on EEs and deep-tech startups from 132 countries, collected in a global innovation index and Crunchbase data sets. The NCA makes it possible to identify whether an EEs resource is a necessary condition that enables entrepreneurship.

Necessary conditions are related to political and business environment; education, research and development; general infrastructure; credit; trade; diversification and market size; and knowledge absorption capacity.

The results show that business and political environments are the most necessary conditions to drive deep-tech entrepreneurship.

Policymakers could prioritize conditions that maximize entrepreneurial output levels rather than focusing on less necessary elements.

Some resources require less performance than others. So, policymakers should consider allocating policy efforts to strengthen resources that maximize output levels.

Studies on deep-tech entrepreneurship are scarce. This study provides a bottleneck analysis that can guide the formulation of policies to support deep-tech entrepreneurship, as it allows to identify priority areas for resource allocation.

This study aims to provide a measurement model, and the underlying constructs and items, for Logistics 4.0 in manufacturing companies. Industry 4.0 technology for logistics processes has been termed Logistics 4.0. Logistics 4.0 and its elements have seen varied conceptualizations in the literature. The literature has mainly focused on conceptual and theoretical studies, which supports the notion that Logistics 4.0 is a relatively young area of research. Refinement of constructs and building consensus perspectives and definitions is necessary for practical and theoretical advances in this area.

Based on a detailed literature review and practitioner focus group interviews, items of Logistics 4.0 for manufacturing enterprises were further validated by using a large-scale survey with practicing experts from organizations located in Central Europe, the Northeastern United States of America and Northern Thailand. Exploratory and confirmatory factor analyses were used to define a measurement model for Logistics 4.0.

Based on 239 responses the exploratory and confirmatory factor analyses resulted in nine items and three factors for the final Logistics 4.0 measurement model. It combines “the leveraging of increased organizational capabilities” (factor 1) with “the rise of interconnection and material flow transparency” (factor 2) and “the setting up of autonomization in logistics processes” (factor 3).

Practitioners can use the proposed measurement model to assess their current level of maturity regarding the implementation of Logistics 4.0 practices. They can map the current state and derive appropriate implementation plans as well as benchmark against best practices across or between industries based on these metrics.

Logistics 4.0 is a relatively young research area, which necessitates greater development through empirical validation. To the best of the authors knowledge, an empirically validated multidimensional construct to measure Logistics 4.0 in manufacturing companies does not exist.