Search results

Introduction: Organisations all over the world are experiencing skill gaps. One of the key factors contributing to the shortage of competent workers is the inability to find candidates that fit the profile. Most of the time, the market does not offer what organisations require.

Purpose: This research focuses on skill shortages and labour market rigidity in the information technology (IT) sector. It discusses the impact of labour shortage and strategies to overcome these challenges.

Need of the Study: The study is required to reduce the skill shortage in the IT sector and inflexibility in the labour market.

Methodology: The data are collected from secondary sources, that is, books, journals and other internet sources.

Findings: The labour market volatility is impacted by several external factors leading to rigidity and talent shortages. Different forecasts within the IT industry, manufacturing, media and telecommunications indicate large-scale labour shortages. The growing influence of digitalisation further creates challenges for organisations during the hiring process as the identified skill gaps for IT professionals are also identified.

Practical Implications: Labour market rigidity affects the labour market. Shifts in labour supply and demand do not always impact wages. Methods are suggested on how to reduce the rigidity in the labour market and, in turn, decrease the skill gaps.

The efficient functioning of the labour market is an important factor that affects long-term economic growth. The interaction of supply and demand on the labour market is influenced by institutions which change the motivations and behaviour of economic actors and, ultimately, the flexibility of the labour market. There is no consensus in the literature on the effect these institutions have on labour market outcomes. This chapter focuses on a set of selective labour market institutions (employment protection legislation, minimum wages, unemployment benefits, labour taxation, trade unions and active labour market policies), compares their relevance to other European Union (EU) countries and through the lens of the Beveridge curve it tries to evaluate their impact on effectiveness of the Czech labour market. The international comparison shows that most of the considered institutions/regulations do not reach such importance (except employment protection legislation) and that they have a significant negative effect on labour market outcomes. Even the model of the Beveridge curve does not indicate that the Czech labour market is characterised by rigidities that would impair the effectiveness of a matching process at the aggregate level.

The purpose of this paper is to investigate the process of fused filament fabrication (FFF) of a compliant gripper (CG) using thermoplastic polyurethane (TPU) material. The paper studies the applicability of different CG designs and the efficiency of some design parameters.

After reviewing a number of different papers, two designs were selected for a number of exploratory experiments. Using design of experiments (DOE) techniques to identify important design parameters. Finally, the efficiency of the parts was investigated.

The research finds that a simpler design sacrifices some effectiveness in exchange for a remarkable decrease in production cost. Decreasing infill percentage of previous designs and 3D printing them, out of TPU, experimenting with different parameters yields functional products. Moreover, the paper identified some key parameters for further optimization attempts of such prototypes.

The cost of conducting FFF experiments for TPU increases dramatically with product size, number of parameters studied and the number of experiments. Therefore, all three of these factors had to be kept at a minimum. Further confirmatory experiments encouraged.

This paper addresses an identified need to investigate applications of FFF and TPU in manufacturing functional efficient flexible mechanisms, grippers specifically. While most research focused on designing for increased performance, some research lacks discussion on design philosophy, as well as manufacturing issues. As the needs for flexible grippers vary from high-performance grippers to lower performance grippers created for specific functions/conditions, some effectiveness can be sacrificed to reduce cost, reduce complexity and improve applicability in different robotic assemblies and environments.

This study aims to develop a model of learning-by-hiring in which knowledge gains may occur at the time of recruitment but also after recruitment when other incumbent organizational members assimilate a recruit’s knowledge. The author’s model predicts that experienced recruits are more likely to catalyze change to their organization’s core technological capabilities.

The continuous-time parametric hazard rate regressions predict core technological change in a long panel (1970–2017) of US biotechnology industry patent data. The author uses over 140,000 patents to model the evolution of knowledge of over 52,000 scientists and over 4,450 firms. To address endogeneity concerns, the author uses the Heckman selection method and does robustness tests using a difference-in-difference analysis.

The author finds that a hire’s prior research and development (R&D) experience helps overcome inertia arising from her or his new-to-an-organization “distant” knowledge to increase the likelihood of core technological change. In addition, while the author finds that incumbent organizational members resist technological change, experienced hires may effectively induce them to adopt new ways of doing things. This is particularly the case when hires collaborate with incumbents in R&D projects. Understanding the effects of hiring on core technological change, therefore, benefits from an assessment of hire R&D experience and its effects on incumbent inertia in an organization.

First, the author does not recommend managers to hire scientists with considerable distant knowledge only as this may be detrimental to core technological change. Second, the author recommends organizations striving to effectuate technological change to hire people with considerable prior R&D experience as this confers them with the ability to influence other members and socialize incumbent members. Third, the author recommends that managers hire people with both significant levels of prior experience and distant knowledge as they are complements. Finally, the author recommends managers to encourage collaboration between highly experienced hired scientists and long-tenured incumbent organizational members to facilitate incumbent learning, socialization and adoption of new ways of doing things.

This study develops a model of learning-by-hiring, which, to the best of the authors’ knowledge, is the first to propose, test and advance KM literature by showing the effectiveness of experienced hires to stimulate knowledge diffusion and core technological change over time after being hired. This study contributes to innovation, organizational learning and strategy literatures.

This study aims to investigate the direct effect of intellectual capital on the organizational performance of Indonesian state-owned enterprises (SOEs) and their subsidiaries. Furthermore, it also examines whether the relationship is mediated by open innovation and moderated by organizational inertia.

This study is designed as quantitative research. A survey method is employed to collect data by distributing questionnaires to the upper-level managers of the SOEs and their subsidiaries. A total of 293 questionnaires were distributed to the respondents, and 97 responses were obtained for further analysis. The partial least square structural equation modeling (PLS-SEM) is used to test the hypotheses. A mediation-moderation research framework is employed.

The results show that intellectual capital has a positive effect on organizational performance. Further results also demonstrate that open innovation mediates the intellectual capital–organizational performance relationship and organizational inertia moderates the intellectual capital–organizational performance relationship. Theoretically, the findings contribute to the resource-based view (RBV) and knowledge-based view (KBV) by providing empirical evidence of the importance of distinctive internal resources in achieving superior organizational performance. Practically, the findings provide strategic information for managers that they should properly manage intellectual capital, open innovation and organizational inertia because of their effects on organizational performance.

First, this study addresses the previous research gaps by confirming that intellectual capital has a positive effect on organizational performance in the research setting of an emerging market. Second, by using a mediation research framework, this study shows that open innovation mediates the relationship between intellectual capital and organizational performance. Third, by using a moderating research framework, this study also reveals that organizational inertia weakens the relationship between intellectual capital and organizational performance. Those associations are rarely researched.

Based on the resource bricolage theory, we investigate the impact of proactive market orientation and responsive market orientation on firms’ disruptive green innovation. We also examine the impact of resource bricolage on disruptive green innovation and the mediating role of resource bricolage.

Quantitative data were collected from 232 firms in China. Structural equation modelling was used to test hypotheses.

The result show that proactive market orientation had positive effect on firm’s disruptive green innovation, whereas responsive market orientation had negative effect on firm’s disruptive green innovation. In addition, resource bricolage positively promotes firm’s disruptive green innovation. Resource bricolage played a mediating role between proactive market orientation and disruptive green innovation. Resource bricolage had a suppressing effect between responsive market orientation and disruptive green innovation.

This study makes up for the deficiency of the existing research on the relationship between market orientation and enterprise disruptive green innovation, improves the guidance mechanism of disruptive green innovation.

The purpose of this study is to offer a better and more effective hexacopter design for a 3 kg payload using finite element analysis (FEA), facilitating the use of different materials for different components that too without compromising strength.

A 3D computer-aided design (CAD) model of a hexacopter with a regular hexagonal frame is presented. Furthermore, a finite element model is developed to perform a structural analysis and determine Von Mises stress and strain values along with deformations of different components of the proposed hexacopter design.

The results establish that carbon fibre outperforms acrylonitrile butadiene (ABS) with respect to deformations. Within the permissible limits of the stress and strain values, both carbon fiber and ABS are suggested for different components. Thus, a proposed hexacopter offers lighter weight, high strength and low cost.

The use of different materials for different components is suggested by making use of static structural analysis. This encourages new research work and helps in developing new applications of hexacopter, and it has never been reported in literature. The suggested materials for the components of the hexacopter will prove to be suitable considering weight, strength and cost.

Exploration and exploitation have long been documented as prominent approaches to business management and organizational adaptation to external environment. Maintaining balance between these activities is a key to survival and prosperity. However, there is little direct evidence of the effect of such combined usage of both approaches on firm performance in times of crisis, especially within small- and medium-sized enterprises (SMEs). The purpose of this paper is to reveal the role of balanced ambidexterity in shaping firm performance during COVID-19 recession.

Based on a survey of 333 Russian SMEs, the authors test the proposed theoretical framework linking innovative ambidexterity to firm performance level and variability taking into account technological uncertainty.

The results show that innovative ambidexterity tends to increase level and decrease variability of performance outcomes, whereas technological uncertainty acts as a positive contingency for this impact.

The results provide an improved understanding of ambidexterity and organizational literatures by clarifying the contingent nature of the ambidexterity–firm performance relationship during COVID-19 recession.

The aim of the work is to investigate structural behaviour of reinforced concrete (RF) beam retrofitted with basalt fibre (BF) fabric. The incorporation of BF showed enhancement in bending strength, to increase confinement and to repair damages caused by cracking. In the early decades, using BF for composite materials shaped BF as an excellent physical substance with necessary mechanical properties, highlighting the significant procedures ability.

Specimens were casted with U-wrapped BF and then evaluated based on flexural tests. In the test carried over for flexural fortifying assessment, BF reinforcements demonstrated a definitive quality improvement in the case of the subjected control sample; ultimately, the end impacts depend upon the applied test parameters. From the outcomes introduced in this comparison, for the double-wrapped sample, the modifications improved by 12% than that of the single-wrapped beam, which is identified to subsist for a better strengthening of new-age retrofitting designs.

The current research deals with the retrofitting of RC beam by conducting a comparative experiment on wrapping of BF (single or double BF wrapping) in improving the mechanical behavior of concrete.

It can be shown from the experimental results that increasing the number of layers has significant effect on basalt strengthened beams.

The purpose of this study is to enhance the functional properties of Hessian fabric through resin finishing. Hessian bags made of lignocellulosic jute fiber are commonly used to pack, store and transport agro-commodities, including horticultural crops such as rice, potato, onion and wheat. However, because of high water affinity, these bags undergo degradation in properties due to moisture release by the stored commodities themselves. Exposure to natural elements, e.g. rain and dew, also causes moisture absorption in hessian bags. Once the bag gets moistened, degradation of jute bags starts due to microbial attack, leading to loss in tensile strength and change in extensibility, leading to ultimate breakage in warp and weft directions of the fabric.

To overcome the degradation in the functional properties of hessian fabric due to exposure to moisture and microbial attack, the application of semi-synthetic polymeric materials was carried out.

Tenacity, bursting strength, puncture resistance, tear strength and breaking load, as well as life cycle of resin-treated jute fabric was found to be better than control jute.

To the best of the authors’ knowledge, no recent reports of resin finishing on jute (hessian) fabric with semi-synthetic resins are presently available, other than coating with rubber.