Search results

This study investigates the impact of the fire decay phase on structural damage using the sectional analysis method. The primary objective of this work is to forecast the non-dimensional capacity parameters for the axial and flexural load-carrying capacity of reinforced concrete (RC) sections for heating and the subsequent post-heating phase (decay phase) of the fire.

The sectional analysis method is used to determine the moment and axial capacities. The findings of sectional analysis and heat transfer for the heating stage are initially validated, and the analysis subsequently proceeds to determine the load capacity during the fire’s heating and decay phases by appropriately incorporating non-dimensional sectional and material parameters. The numerical analysis includes four fire curves with different cooling rates and steel percentages.

The study’s findings indicate that the rate at which the cooling process occurs after undergoing heating substantially impacts the axial and flexural capacity. The maximum degradation in axial and flexural capacity occurred in the range of 15–20% for cooling rates of 3 °C/min and 5 °C/min as compared to the capacity obtained at 120 min of heating for all steel percentages. As the fire cooling rate reduced to 1 °C/min, the highest deterioration in axial and flexural capacity reached 48–50% and 42–46%, respectively, in the post-heating stage.

The established non-dimensional parameters for axial and flexural capacity are limited to the analysed section in the study owing to the thermal profile, however, this can be modified depending on the section geometry and fire scenario.

The study primarily focusses on the degradation of axial and flexural capacity at various time intervals during the entire fire exposure, including heating and cooling. The findings obtained showed that following the completion of the fire’s heating phase, the structural capacity continued to decrease over the subsequent post-heating period. It is recommended that structural members' fire resistance designs encompass both the heating and cooling phases of a fire. Since the capacity degradation varies with fire duration, the conventional method is inadequate to design the load capacity for appropriate fire safety. Therefore, it is essential to adopt a performance-based approach while designing structural elements' capacity for the desired fire resistance rating. The proposed technique of using non-dimensional parameters will effectively support predicting the load capacity for required fire resistance.

The fire-resistant requirements for reinforced concrete structures are generally established based on standard fire exposure conditions, which account for the fire growth phase. However, it is important to note that concrete structures can experience internal damage over time during the decay phase of fires, which can be quantitatively determined using the proposed non-dimensional parameter approach.

The research aims to investigate the impact of thermo-mechanical aging on SBR under cyclic-loading. By conducting experimental analyses and developing a 3D finite element analysis (FEA) model, it seeks to understand chemical and physical changes during aging processes. This research provides insights into nonlinear mechanical behavior, stress softening and microstructural alterations in SBR compounds, improving material performance and guiding future strategies.

This study combines experimental analyses, including cyclic tensile loading, attenuated total reflection (ATR), spectroscopy and energy-dispersive X-ray spectroscopy (EDS) line scans, to investigate the effects of thermo-mechanical aging (TMA) on carbon-black (CB) reinforced styrene-butadiene rubber (SBR). It employs a 3D FEA model using the Abaqus/Implicit code to comprehend the nonlinear behavior and stress softening response, offering a holistic understanding of aging processes and mechanical behavior under cyclic-loading.

This study reveals significant insights into SBR behavior during thermo-mechanical aging. Findings include surface roughness variations, chemical alterations and microstructural changes. Notably, a partial recovery of stiffness was observed as a function of CB volume fraction. The developed 3D FEA model accurately depicts nonlinear behavior, stress softening and strain fields around CB particles in unstressed states, predicting hysteresis and energy dissipation in aged SBRs.

This research offers novel insights by comprehensively investigating the impact of thermo-mechanical aging on CB-reinforced-SBR. The fusion of experimental techniques with FEA simulations reveals time-dependent mechanical behavior and microstructural changes in SBR materials. The model serves as a valuable tool for predicting material responses under various conditions, advancing the design and engineering of SBR-based products across industries.

Rare book collections are special, not only in terms of their physical appearance but also because of their historical significance and the information they contain. The purpose of this study is twofold: to identify the physical condition of rare book collections and to determine the main causes of damage to rare books collection that belongs to a museum library in Indonesia.

This research involved conducting a survey of the physical condition of the collection of rare books owned by a museum library in Indonesia. Supporting data was also obtained through interviews with one of the staff who served as the museum collection conservator. This study used random sampling to take samples from the collection, which consisted of 950 rare books, with total sample of 91.

The results obtained state that the condition of the existing rare book collection is classified as severely damaged. One of the causes of damage that can be addressed immediately is the cleaning regime: the collection and library space should be cleaned thoroughly and regularly so that dust and dirt in and around the rare book collection can be reduced.

This research was limited to physical identification, which can be done easily because it does not require various kinds of laboratory tests. It was a case study examining a single collection in a single museum library. The pool of books from which the samples were taken was therefore relatively homogenous. Therefore, it is hoped that further research can identify other factors and types of damage in more detail so that all damage to rare book collections can be identified and mitigated.

Research discussing the condition of rare book collections, especially for special libraries in museums in Indonesia, is still very limited. Detailed surveys of the physical condition of collections, especially rare book collections in museums, have rarely been discussed by previous research. The work will contribute to assessing the physical condition of rare book collections.

Composite materials have revolutionized the aerospace industry by offering superior structural qualities over traditional elements. This study aims to focus on the development and testing of bamboo natural fiber-based composites enhanced with SiO₂ nanoparticles.

The investigation involved fabricating specimens with varying nanoparticle compositions (0, 10 and 20%) and conducting tensile, flexural, impact and fracture toughness tests. Results indicated significant improvements in mechanical properties with the addition of nanoparticles, particularly at a 10% composition level.

This study underscores the potential of natural fiber composites, highlighting their environmental friendliness, cost-effectiveness and improved structural properties when reinforced with nanoparticles. The findings suggest an optimal ratio for nanoparticle integration, emphasizing the critical role of precise mixing proportions in achieving superior composite performance.

The tensile strength, flexural strength, impact resistance and fracture toughness exhibited notable enhancements compared with the 0 and 20% nanoparticle compositions. The 10% composition showed the most promising outcomes, showcasing increased strength across all parameters.

Exposure to a public health threat of significant proportions made current models inadequate to explain the failure phenomenon in small businesses. Hence, the need to reimagine the phenomenon. Borrowing from the principles of biology, this study extended theoretical and empirical perspectives on the failure phenomenon by unpacking its constituent elements and the measurement metrics using the regeneration lens.

Based on a cohort tracked over time, the study estimated the survival probabilities of small and medium-scale enterprises (SMEs) with and without regeneration using the Kaplan–Meier method. The study investigated the factors that predict enterprise regenerative capacity using the multivariate Cox proportional hazard ratios.

Rates of interruption in business activity, by month, ranged between 0% and 18% during the follow-up period. True mortality rates hovered between 0% and 4% over the same period. Over three in five SMEs that experienced interruption in business activity without ceasing operations regenerated at some point in time during the follow-up period. The survival probabilities beyond the follow-up period were 0.85 and 0.44 with and without regeneration effects, respectively. Fresh capital injection (+), the introduction of new/improved processes or products/services (+), perceived business outlook (+) and the presence of debt (−) influenced the capacity to regenerate.

The cohort was followed for only six months. There is a need to continue interrogating the failure phenomenon in other contexts over longer periods using the regeneration lens. Bringing on board academia, financial institutions and other SME-related ecosystem players will be strategic.

The approach provides a more nuanced understanding of the life and well-being of enterprises under conditions of disruption. Improving the precision and validity of failure-related statistics enhances their utility in policy and remediation-related discussions.

The results did not show significant differences in SME mortality rates between male and female-owned enterprises. The results provide further evidence that the failure phenomenon is ungendered. As such, financial institutions and the SME ecosystem at large must eliminate perceptual gender biases in the financing and other support to SMEs.

The study used the principles of biology to reimagine the failure phenomenon in small businesses. The approach breathes life into entrepreneurship research and policy.

Renal failure is an end-stage consequence after persistent hyperglycemia during diabetic nephropathy (DN), and the etiology of DN has been linked to oxidative stress. The purpose of this research was to determine the beneficial synergistic effects of S-Allyl Cysteine (SAC) and Taurine (TAU) on oxidative damage in the kidneys of type 2 diabetic rats induced by hyperglycemia.

Experimental diabetes was developed by administering intraperitoneal single dose of streptozotocin (STZ; 65 mg/kg) with nicotinamide (NA; 230 mg/kg) in adult rats. Diabetic and control rats were treated with SAC (150 mg/kg), TAU (200 mg/kg) or SAC and TAU combination (75 + 100 mg/kg) for four weeks. The estimation of body weight, fasting blood glucose (FBG), oral glucose tolerance test (OGTT), oxidative stress markers along with kidney histopathology was done to investigate the antidiabetic potential of SAC/TAU in the NA/STZ diabetic group.

The following results were obtained for the therapeutic efficacy of SAC/TAU: decrease in blood glucose level, decreased level of thiobarbituric acid reactive substances (TBARS) and increased levels of GSH, glutathione-s-transferase (GST) and catalase (CAT). SAC/TAU significantly modulated diabetes-induced histological changes in the kidney of rats.

SAC/TAU combination therapy modulated the oxidative stress markers in the kidney in diabetic rat model and also prevented oxidative damage as observed through histopathological findings.

Spatial olfactory design in the library appears to be a practical approach to enhance the coordination between architectural spaces and user behaviors, shape immersive activity experiences and shape immersive activity experiences. Therefore, this study aims to explore the association between the olfactory elements of library space and users’ olfactory perception, providing a foundation for the practical design of olfactory space in libraries.

Using the olfactory perception semantic differential experiment method, this study collected feedback on the emotional experience of olfactory stimuli from 56 participants in an academic library. From the perspective of environmental psychology, the dimensions of pleasure, control and arousal of users’ olfactory perception in the academic library environment were semantically and emotionally described. In addition, the impact of fatigue state on users’ olfactory perception was analyzed through statistical methods to explore the impact path of individual physical differences on olfactory perception.

It was found that users’ olfactory perception in the academic library environment is likely semantically described from the dimensions of pleasure, arousal and control. These dimensions mutually influence users’ satisfaction with olfactory elements. Moreover, there is a close correlation between pleasure and satisfaction. In addition, fatigue states may impact users’ olfactory perception. Furthermore, users in a high-fatigue state may be more sensitive to the arousal of olfactory perception.

This article is an empirical exploration of users’ perception of the environmental odors in libraries. The experimental results of this paper may have practical implications for the construction of olfactory space in academic libraries.

The purpose of this paper is to address the challenging issue of developing a quantitative approach for the representation of cultural significance data in heritage information systems (HIS). The authors propose to provide experts in the field with a dedicated framework to structure and integrate targeted data about historical objects' significance in such environments.

This research seeks the identification of key indicators which allow to better inform decision-makers about cultural significance. Identified concepts are formalized in a data structure through conceptual data modeling, taking advantage on unified modeling language (HIS). The design science research (DSR) method is implemented to facilitate the development of the data model.

This paper proposes a practical solution for the formalization of data related to the significance of objects in HIS. The authors end up with a data model which enables multiple knowledge representations through data analysis and information retrieval.

The framework proposed in this article supports a more sustainable vision of heritage preservation as the framework enhances the involvement of all stakeholders in the conservation and management of historical sites. The data model supports explicit communications of the significance of historical objects and strengthens the synergy between the stakeholders involved in different phases of the conservation process.

This paper extends the authors’ previous research work investigating resilience for municipal infrastructure from an asset management perspective. Therefore, this paper aims to formulate a pavement resilience index while incorporating asset management and the associated resilience indicators from the authors’ previous research work.

This paper introduces a set of holistic-based key indicators that reflect municipal infrastructure resiliency. Thenceforth, the indicators were integrated using the weighted sum mean method to form the proposed resilience index. Resilience indicators weights were determined using principal components analysis (PCA) via IBM SPSS®. The developed framework for the PCA was built based on an optimization model output to generate the required weights for the desired resilience index. The output optimization data were adjusted using the standardization method before performing PCA.

This paper offers a mathematical approach to generating a resilience index for municipal infrastructure. The statistical tests conducted throughout the study showed a high significance level. Therefore, using PCA was proper for the resilience indicators data. The proposed framework is beneficial for asset management experts, where introducing the proposed index will provide ease of use to decision-makers regarding pavement network maintenance planning.

The resilience indicators used need to be updated beyond what is mentioned in this paper to include asset redundancy and structural asset capacity. Using clustering as a validation tool is an excellent opportunity for other researchers to examine the resilience index for each pavement corridor individually pertaining to the resulting clusters.

This paper provides a unique example of integrating resilience and asset management concepts and serves as a vital step toward a comprehensive integration approach between the two concepts. The used PCA framework offers dynamic resilience indicators weights and, therefore, a dynamic resilience index. Resiliency is a dynamic feature for infrastructure systems. It differs during their life cycle with the change in maintenance and rehabilitation plans, systems retrofit and the occurring disruptive events throughout their life cycle. Therefore, the PCA technique was the preferred method used where it is data-based oriented and eliminates the subjectivity while driving indicators weights.