Search results
1 – 10 of 14Chengcheng Luo, Shaowu Ning, Zhanli Liu, Xiang Li and Zhuo Zhuang
This paper aims to propose a design method for attenuating stress waves pressure using soft matrix embedded with particles.
Abstract
Purpose
This paper aims to propose a design method for attenuating stress waves pressure using soft matrix embedded with particles.
Design/methodology/approach
Based on the phononic crystal theory, the particle composed of hard core and soft coating can form a spring oscillator structure. When the frequency of the wave is close to the resonance frequency of the spring oscillator, it can cause the resonance of the particle and absorb a lot of energy. In this paper, the resonant phononic crystal with three phases, namely, matrix, particle core and coating, is computationally designed to effectively mitigate the stress wave with aperiodic waveform.
Findings
The relationship between the center frequency and width of the bandgap and the geometric and physical parameters of particle core are discussed in detail, and the trend of influence is analyzed and explained by a spring oscillator model. Increasing the radius of hard core could effectively enhance the bandgap width, thus enhancing the effect of stress wave attenuation. In addition, it is found that when the wave is in the bandgap, adding viscosity into the matrix will not further enhance the stress attenuation effect, but will make the stress attenuation effect of the material worse because of the competition between viscous dissipation mechanism and resonance mechanism.
Research limitations/implications
This study will provide a reference for the design of stress wave protection materials with general stress waves.
Originality/value
This study proposes a design method for attenuating stress waves pressure using soft matrix embedded with particles.
Details
Keywords
Rolando Yera, Luisina Forzani, Carlos Gustavo Méndez and Alfredo E. Huespe
This work presents a topology optimization methodology for designing microarchitectures of phononic crystals. The objective is to get microstructures having, as a consequence of…
Abstract
Purpose
This work presents a topology optimization methodology for designing microarchitectures of phononic crystals. The objective is to get microstructures having, as a consequence of wave propagation phenomena in these media, bandgaps between two specified bands. An additional target is to enlarge the range of frequencies of these bandgaps.
Design/methodology/approach
The resulting optimization problem is solved employing an augmented Lagrangian technique based on the proximal point methods. The main primal variable of the Lagrangian function is the characteristic function determining the spatial geometrical arrangement of different phases within the unit cell of the phononic crystal. This characteristic function is defined in terms of a level-set function. Descent directions of the Lagrangian function are evaluated by using the topological derivatives of the eigenvalues obtained through the dispersion relation of the phononic crystal.
Findings
The description of the optimization algorithm is emphasized, and its intrinsic properties to attain adequate phononic crystal topologies are discussed. Particular attention is addressed to validate the analytical expressions of the topological derivative. Application examples for several cases are presented, and the numerical performance of the optimization algorithm for attaining the corresponding solutions is discussed.
Originality/value
The original contribution results in the description and numerical assessment of a topology optimization algorithm using the joint concepts of the level-set function and topological derivative to design phononic crystals.
Details
Keywords
– The purpose of this paper is to propose a modal method to calculate the band gaps of one-dimensional (1D) phononic crystals.
Abstract
Purpose
The purpose of this paper is to propose a modal method to calculate the band gaps of one-dimensional (1D) phononic crystals.
Design/methodology/approach
The phononic crystals have modes with exponential form envelope in the band gaps, however, outside the band gaps the modes are of amplitude modulation periodic form. Thus the start and end frequencies of band gaps can be determined from the existence conditions of periodic modes. So, the band gaps calculation of 1D phononic crystal is transformed into the existence discussion of periodic solution of mode shapes equation. The results are verified by finite element harmonic response analysis.
Findings
At the start and end frequencies of the band gap, the mode equation have solution with period of lattice constant.
Originality/value
Compared with the traditional theoretical methods, the proposed modal method has a clearer principle and easier calculation.
Details
Keywords
Hongyan Tian, Ding Tong and Yourui Tao
Membrane-type acoustic metamaterials (MAMs) recently have been emerged to display useful sound attenuation properties in a low-frequency regime. The purpose of this paper is to…
Abstract
Purpose
Membrane-type acoustic metamaterials (MAMs) recently have been emerged to display useful sound attenuation properties in a low-frequency regime. The purpose of this paper is to present an analytical approach to investigate the transmission loss (TL) of a square membrane-ring structure of MAM. The geometrical effects of ring mass on the TL peak and dip frequencies of the MAM are obtained and discussed.
Design/methodology/approach
In this paper, based on the wave propagation and vibration theory, considering the effects of ring mass and acoustic pressure on the membrane, an analytical model is presented to analyze acoustic response of MAM.
Findings
Multiple peak frequencies and wide bandwidth appear in the membrane-ring structure, and they can be tuned by changing the location or numbers of the ring mass on the membrane. It is a useful method for designing such type of metamaterial.
Originality/value
In this paper, an analytical method is presented to evaluate the effects of ring geometric on the TL performance of square membrane-type locally resonant metamaterial. It is proved that achieving broadband and multi-peak TL profile in a single cell can indeed happen by increasing additional ring mass. The TL and frequency bandwidth can be tuned by changing the location, adding numbers and varying mass distribution of the ring masses on the membrane.
Details
Keywords
Guochang Lin, Chaonan Hu, Lin Cong and Yongtao Yao
The purpose of this paper is to developing a kind of acoustic metamaterial with wide frequency band especially in low frequency region. At the same time, its the tunability of…
Abstract
Purpose
The purpose of this paper is to developing a kind of acoustic metamaterial with wide frequency band especially in low frequency region. At the same time, its the tunability of sound insulation frequency is achieved.
Design/methodology/approach
A three-dimensional (3D) acoustic metamaterial consisting of rigid frame, spherical attachment and thin film is proposed. The material parameters and the effect of the attachment hole on the forbidden band are investigated by finite element simulation. The sound insulation effect of the structure is validated by the combination of simulation and experiment.
Findings
The results show that the elastic modulus of the structural material determines the initial frequency of the forbidden band of the proposed 3D acoustic metamaterials. The lower the elastic modulus of the structural material, the lower the initial frequency of the forbidden band. The material parameters of the frame mainly affect the initial frequency of the first forbidden band, and the material parameters of the attachment will affect both the initial and termination frequency of the first forbidden band. Holes in the attachments reduce the band gap width. The characteristic curve moves down with the increase of subtracted mass.
Research limitations/implications
The findings may greatly benefit the application of the acoustic metamaterials in the fields of sound insulation and noise reduction.
Originality/value
This acoustic metamaterial structure has excellent sound insulation performance. At the same time, the single cell structure can be assembled into any shape. The structure can achieve sound selective filtering and combination control.
Details
Keywords
Yingli Li, Chenwei Wu, Yong Peng and Xudong Jiang
In order to investigate the vibration reduction properties of a three-dimensional elastic metastructure with spherical cavities at low frequencies.
Abstract
Purpose
In order to investigate the vibration reduction properties of a three-dimensional elastic metastructure with spherical cavities at low frequencies.
Design/methodology/approach
The bandgap characteristics of a three-dimensional elastic metastructure with spherical cavities are studied based on analytical and numerical approaches.
Findings
The results of both method revealed that the vibration of the vertexes masses is important for opening bandgaps. The fact that the big sphere cavity radius or short side length of the cube unit leads to a wider bandgap, is noteworthy.
Originality/value
This research provides theoretical guidance for realizing the vibration attenuation application of EMs in practical engineering.
Details
Keywords
Wolfgang Weber, Uwe Reuter and Bernd W. Zastrau
The purpose of this paper is to analyze the wave scattering behaviour of an inhomogeneous and eccentric inclusion in a homogeneous matrix material. Another purpose is to evaluate…
Abstract
Purpose
The purpose of this paper is to analyze the wave scattering behaviour of an inhomogeneous and eccentric inclusion in a homogeneous matrix material. Another purpose is to evaluate the influence of epistemic uncertainty on the wave scattering behaviour, particularly on the lack of knowledge about this eccentricity. This task calls for a multidisciplinary model.
Design/methodology/approach
The inclusion is modelled as a multi‐layered obstacle, with all layers being eccentric with respect to each other. The material behaviour of the embedding matrix is linear elastic and isotropic. In a multidisciplinary approach, the interaction of the inhomogeneous inclusion and the embedding matrix with respect to an incoming shear wave of arbitrary shape is solved analytically. The purely analytical solution process takes place in the frequency‐domain. Due to the lack of knowledge about the eccentric configuration of the matrix inclusion and its influence on the total wave field inside the matrix material, the mechanical model is coupled with fuzzy set theory for modelling this non‐stochastic uncertainty.
Findings
An analytical model for describing the wave scattering behaviour of an elastic matrix inclusion with eccentric set‐up is found and intimately connected with the framework of fuzzy set theory. Hence it is shown that the treatment of epistemic uncertainty with the derived analytical model is possible and fruitful. Additionally, it is shown that eccentric configurations lead to highly increased amplitudes with respect to the reference case of a concentric or even homogenous set‐up of the inclusion.
Originality/value
The value of this contribution is in the analytical model, which allows one to predict the wave scattering behaviour of eccentric configurations of multi‐layered fibres including the surrounding interphase, and its coupling with fuzzy set theory to cope with the epistemic uncertainty inherent in the geometric set‐up of the matrix inclusion.
Details
Keywords
Amin Eidi, Mousa Shamsi and Habib Badri Ghavifekr
This paper aims to a novel fabricated resonator structure which consists of some single mechanical resonators as a mass sensor.
Abstract
Purpose
This paper aims to a novel fabricated resonator structure which consists of some single mechanical resonators as a mass sensor.
Design/methodology/approach
The structure is proposed to detect the target molecules and cells in a droplet. Also, at this design the mechanical coupling springs of the proposed structure are designed in such a way that it resonates in shear resonance mode which minimizes the damping effect.
Findings
This proposed design can be fabricated in different sizes due to the requirements of an application.
Originality/value
The proposed design is fabricated in mesoscale and its mass sensitivity is evaluated and reported in this paper.
Details
Keywords
Amin Eidi, Mousa Shamsi and Habib Badri Ghavifekr
In this work, the sensing and actuating elements are designed with interdigitated capacitors away from the sensitive element on which the droplet is placed. This pattern helps to…
Abstract
Purpose
In this work, the sensing and actuating elements are designed with interdigitated capacitors away from the sensitive element on which the droplet is placed. This pattern helps to prevent interference of electrical elements with the droplet. Choosing shear resonance mode at this proposed structure minimizes the damping effect of droplet touch by the resonator structure. The glass-based standard fabrication method of the proposed biosensor is presented exactly.
Design/methodology/approach
Mechanical resonator sensors are extremely limited because of the high damping factor and the high electrical conductivity in the aqueous environment. In this work, a molecule detector biosensor is proposed for droplet analysis, which is possible to fabricate using micro-electro-mechanical systems (MEMS) technology. By electromechanical coupling of resonators as a mechanical resonator structure, a standing mechanical wave is formed at this structure by electrostatic actuating elements.
Findings
In this paper, a mechanical resonator structure as a biosensor is proposed for micro-droplet analysis that can be fabricated by MEMS technology. It is designed at a lower cost fabrication method using electrostatic technology and interdigitated capacitors. The response of the biosensor displacement frequency at the resonance frequency of the desired mode is reasonable for measuring the capacitive changes of its output. The mass sensitivity of the proposed biosensor is in the range of 1 ng, and it has a large sensitive area for capturing target molecules.
Originality/value
To evaluate the quality of the proposed design, the stimulated analysis is conducted by COMSOL and results are presented.
Details
Keywords
Zhaozhao Tang, Wenyan Wu, Po Yang, Jingting Luo, Chen Fu, Jing-Cheng Han, Yang Zhou, Linlin Wang, Yingju Wu and Yuefei Huang
Surface acoustic wave (SAW) sensors have attracted great attention worldwide for a variety of applications in measuring physical, chemical and biological parameters. However…
Abstract
Purpose
Surface acoustic wave (SAW) sensors have attracted great attention worldwide for a variety of applications in measuring physical, chemical and biological parameters. However, stability has been one of the key issues which have limited their effective commercial applications. To fully understand this challenge of operation stability, this paper aims to systematically review mechanisms, stability issues and future challenges of SAW sensors for various applications.
Design/methodology/approach
This review paper starts with different types of SAWs, advantages and disadvantages of different types of SAW sensors and then the stability issues of SAW sensors. Subsequently, recent efforts made by researchers for improving working stability of SAW sensors are reviewed. Finally, it discusses the existing challenges and future prospects of SAW sensors in the rapidly growing Internet of Things-enabled application market.
Findings
A large number of scientific articles related to SAW technologies were found, and a number of opportunities for future researchers were identified. Over the past 20 years, SAW-related research has gained a growing interest of researchers. SAW sensors have attracted more and more researchers worldwide over the years, but the research topics of SAW sensor stability only own an extremely poor percentage in the total researc topics of SAWs or SAW sensors.
Originality/value
Although SAW sensors have been attracting researchers worldwide for decades, researchers mainly focused on the new materials and design strategies for SAW sensors to achieve good sensitivity and selectivity, and little work can be found on the stability issues of SAW sensors, which are so important for SAW sensor industries and one of the key factors to be mature products. Therefore, this paper systematically reviewed the SAW sensors from their fundamental mechanisms to stability issues and indicated their future challenges for various applications.
Details